Samsung BD-H6500 User Manual

BD-H6500

Blu-ray™ Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Safety Information

Warning

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE

PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

- Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

- Do not place vessels (vases etc.) containing water on this apparatus. A water spill can cause a fire or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

• Route power-supply cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the apparatus.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorised dealer or service Centre.

2 English

• Maintenance of Cabinet.

- Before connecting other components to this product, be sure to turn them off.

- If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

• Be sure to pull the power plug out of the outlet if the product is to remain unused or if you are leaving the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

• Contact an authorised service Centre for information if you intend to install your product in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage of your product.

• Use only a properly grounded plug and wall outlet.

- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

• Do not allow children to hang on the product.

• Store the accessories (battery, etc.) in a location

safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service Centre.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

• Do not dispose of batteries in a fire.

• Do not plug multiple electric devices into the

same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

CLASS 1 LASER product

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION :

• THIS PRODUCT USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE PRODUCT CORRECTLY AS INSTRUCTED.

01 Safety Information

3 English

Safety Information

• THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. This product satisfies CE regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

| NOTES |

\If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this product, the product cannot play the disc.

IMPORTANT NOTE

The mains lead on this equipment is supplied with a molded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.

However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains jack, as there is a risk of shock hazard from the bared flexible cord.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. The product unit accompanying this user manual is licenced under certain intellectual property rights of certain third parties.

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

4 English

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

• Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

• Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

• A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

• Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.).

• Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the player's HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

• The player outputs 3D signals only through HDMI cable connected to the HDMI OUT port.

• The video resolution in 3D play mode is determined by the resolution of the original 3D video. You can not change the resolution.

• Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

• You must use a high-speed HDMI cable for proper output of the 3D signal.

• Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46-inch screen, stay 138 inches (11.5 feet) from the screen.

• Place the 3D video screen at eye level for the best 3D picture.

• When the player is connected to some 3D devices, the 3D effect may not function properly.

• This player does not convert 2D content into 3D.

• "Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of the Blu-ray Disc Association.

01 Safety Information

5 English

Contents

SAFETY INFORMATION

2 Warning

4 Precautions

4 Important Safety Instructions

5 Using the 3D function

GETTING STARTED

8 Accessories

9 Front Panel

9 Rear Panel

10 Remote Control

10 Tour of the Remote Control

CONNECTIONS

11 Connecting to a TV

12 Connecting to an Audio System

12 Method 1 Connecting to an HDMI

supported AV receiver

12 Method 2 Connecting to an AV receiver

with Dolby Digital or DTS decoder

13 Connecting to a Network Router

13 Wired Network

13 Wireless Network

SETTINGS

14 The Initial Settings Procedure

14 The Home Screen

15 Accessing the Settings Screen

15 Buttons on the Remote Control Used for

the Settings Menu

16 Settings Menu Functions

16 Picture

17 Sound

17 Network

18 Smart Hub

18 System

20 Support

20 Networks and the Internet

20 Configuring Your Network Connection

23 Wi-Fi Direct

23 Upgrading Software

24 Update Now

24 Auto Update

MEDIA PLAY

26 Playing Commercial Discs

26 Disc Storage & Management

26 Playing Photos, Videos, and Music

(Multimedia)

26 Playing Media Content Saved on a USB

Device

27 Playing Media Content Saved in a

Computer/Mobile Device

27 Playing a Disc with User Recorded

Content

28 Playing Media Content Saved in a Cloud

Service

28 Samsung Link

29 Controlling Video Playback

29 Buttons on the Remote Control used for

Video Playback

29 Using the Settings Menu (During the

Playback)

31 Using the View & Options Menus

6 English

31 Controlling Music Playback

31 Buttons on the Remote Control used for

Music Playback

32 Using the Options Menu (During the

Playback)

32 Using the View & Options Menus (On a file

screen)

33 Repeating Tracks on an Audio CD

33 Shuffling Tracks on an Audio CD

33 Creating a Playlist from an Audio CD

33 Ripping

34 Playing Photo Contents

34 Using the Tools Menu (During Playback)

35 Using the View & Options Menus

36 Send files

36 Copying Videos, Music or Photos

36 Using the Send Function

NETWORK SERVICES

37 Creating a Samsung Account

37 Before Using Apps

38 Using Films and TV Shows

39 Using Apps

39 The Apps Screen at a Glance

40 Starting an Application

41 Screen mirroring

41 Using the Web Browser

42 Link Browsing and Pointer Browsing

42 The Control Panel at a Glance

43 Using the Setting Menu

45 Linking Your Internet Service Accounts

to the Product

45 BD-LIVE™

APPENDIX

46 Additional Information

46 Notes

48 Resolution according to the contents type

49 Digital Output Selection

50 Troubleshooting

52 Repairs

53 Disc and Format Compatibility

53 Disc types and contents your product can

play

53 Disc types your product cannot play

54 Region Code

54 Logos of Discs the product can play

55 Supported Formats

58 Compliance and Compatibility Notice

59 Copy Protection

59 Network Service Disclaimer

60 Licences

62 Specifications

Contents

7 English

Getting StartedGetting Started

Accessories

Check for the supplied accessories shown below.

Batteries for Remote Control (AAA Size)

User Manual Remote Control

SOURCE

VOL+

DISC MENU

SMART

HOME

HUB

RETURN

A B C D

SEARCH FULLSUBTITLE

AUDIO

PANDORA

DIGITAL

VOL VOL

– +

SAMSUNG TV

HOME

VOL–

TITLE MENU

POPUP

REPEAT

APPS

INFOTOOLS

EXIT

SCREEN

SUBTITLE

INPUT

8 English

Front Panel

PLAY/PAUSE BUTTON

STOP BUTTON

OPEN/CLOSE BUTTON

POWER BUTTON

DISC TRAY

| NOTE |

\To upgrade the product's software through the USB Host jack, you must use a USB memory stick.

\When the product displays the Blu-ray Disc's menu, you cannot start the movie by pressing the Play button on the product

or the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the v button on the remote control.

DISPLAY

REMOTE CONTROL SENSOR

USB HOST

02 Getting Started

Rear Panel

HDMI OUT LAN

DIGITAL AUDIO OUT

9 English

Getting Started

Remote Control

Tour of the Remote Control

After setup, allows you to set the input

(This button is only available for Samsung TVs.)

Press to open and close the disc tray.

Press the number buttons to operate

Press to skip backwards or forwards.

Press to move to the Home screen.

These buttons are used both for menus

on the player and also several Blu-ray Disc

Use to access various audio functions on a

source on your TV.

Turn the player on and off.

options.

Use to enter the disc menu.

Press to stop a disc.

Press to use Apps.

Press to use the Tools menu.

Return to the previous menu.

functions.

Press to search contents.

disc.

SOURCE

VOL VOL

– +

VOL

SAMSUNG TV

DISC MENU

SMART

HOME

HUB

RETURN

A B C D

SEARCH FULLSUBTITLE

AUDIO

PANDORA

DIGITAL

SUBTITLE

VOL

–

TITLE MENU

POPUP

REPEAT

APPS

INFOTOOLS

EXIT

SCREEN

INPUT

Turn the TV on and off. (This button is only available for Samsung

TV volume adjustment. (This button is only available for Samsung TVs.)

Use to enter the Popup menu/Title menu.

Press to search backwards or forwards.

Press to pause a disc.

Press to play a disc.

Allows you to repeat a title, chapter, track or disc. Use to display the playback information.

Use to select menu items and change menu values.

Press to exit the menu.

Press to use full screen function. During the Blu-ray Disc/DVDs playback, this button does not operate.

Press to switch the Blu-ray Disc/DVD's subtitle language.

TVs.)

Installing batteries

| NOTES |

\If the remote control does not operate properly:

- Check the polarity +/– of the batteries.

- Check if the batteries are drained.

- Check if the remote sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

| CAUTION |

\Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

10 English

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Audio Video

| NOTE |

\If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO OUT on the

product to an audio system to hear audio.

\An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

\When you connect the product to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the

product automatically sets the HDMI output resolution to the highest supported by the TV.

\A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

\To view video in the HDMI 720p,1080i,1080p or 2160p output mode, you must use a High speed (category 2) HDMI cable.

\HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

03 Connections

11 English

Connections

Connecting to an Audio System

You can connect this product to the audio system using the methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver.

• Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on the product to the DIGITAL OPTICAL IN jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

12 English

Method 2Method 1

AudioAudio

Connecting to a Network Router

Wireless Network

You can connect your product to your network router using one of the methods illustrated below.

To use the AllShare network functionality, you must connect your PC to your network as shown in the illustrations. The connection can be wired or wireless.

Wired Network

Broadband modem

(with integrated router)

Broadband

Router

Broadband

modem

| NOTE |

\Your router or your Internet Service Provider's policies

may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

\DSL users, please use a router to make a network

connection.

service

Broadband service

03 Connections

Wireless Router

Broadband

service

| NOTE |

\If your wireless router supports DHCP, this product can

use a DHCP or static IP address to connect to the wireless network.

\Set your wireless router to Infrastructure mode. Ad-hoc

mode is not supported.

\The product supports only the following wireless security

key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

\Select a channel on the wireless router that is not

currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

\If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new Wi-Fi certification specifications.

\Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).

13 English

Settings

The Initial Settings Procedure

• The Home screen will not appear if you do not configure the initial settings.

• The OSD (On Screen Display) may change in this product after you upgrade the software version.

• The access steps may differ depending on the menu you selected.

After you have connected the product to your TV, turn on the TV and product. When you turn on the product the first time, the product's Initial Settings screen appears on the TV. The Initial Settings procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), and network configuration, and connect the player to the Internet.

| NOTE |

\If you skip Network Setup during the Initial Settings

procedure, you can configure your network settings later. See "Configuring Your Network Connection" on pages 20~23 for instructions.

\If you want to display the Initial Settings screen again and

make changes, select Settings > System > Setup in the Home screen or select the Reset option. (See pages 18 or 20)

\If you want to use an Anynet+(HDMI-CEC) function,

please follow the instructions below.

1) Connect the product to an Anynet+(HDMI-CEC)-

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in both the

TV and the product.

3) Set the TV to the Initial Settings Procedure.

The Home Screen

1 2 3 6

No Disc

RECOMMENDED MY APPS

WebBrowser

1 2 3

7 8 9 0

PLAY DISC : Lets you play photos, videos, or music

content from Disc.

2 3

FILMS AND TV SHOWS : Lets you view Films and

TV Shows from the Internet.

| NOTE |

\Depending on your country, this menu function

may not be supported.

MULTIMEDIA : Lets you play photos, videos, or

music content from USB or mobile devices, or PCs.

Search : Lets you search for contents in Films and TV Shows, Apps and YouTube by entering

corresponding search words.

APPS : Gives you access to various applications you

can download.

RECOMMENDED : Gives you direct access to

recommended applications.

MY APPS : Apps downloaded from My Apps are

displayed.

Screen Mirroring : Lets you view the screen of your smart phone or android tablet on a TV you

have connected to this product.

Settings : Opens the product's menu. In the menu can set various functions to suit your personal

preferences.

MULTIMEDIAFILMS AND TV SHOWSPLAY DISC

Screen Mirroring

4 5

APPS

Settings

14 English

| NOTE |

VOL

–

SOURCE

DISC MENU

SMART

TITLE MENU

VOL VOL

POPUP

SAMSUNG TV

– +

HOME

REPEAT

If you leave the product in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

Accessing the Settings Screen

Buttons on the Remote Control Used for the Settings Menu

HOME

HUB

APPS

INFOTOOLS

04 Settings

1. Select Settings on the Home screen, and

then press v button. The Settings screen appears.

Settings

Picture

Sound

Network

Smart Hub

System

Support

Picture

UHD Output Auto

3D Settings

TV Aspect Ratio 16:9 Original

BD Wise Off

Resolution Auto

Movie Frame (24fps) Auto

DVD 24fps Conversion Off

2. To access the menus, sub-menus, and options on the Settings screen, please refer to the remote control illustration below.

2 4

HOME button : Press to move to the Home screen.

RETURN button : Press to return to the previous

menu.

RETURN

(Enter) / DIRECTION buttons :

• Press ▲▼◄► to move the cursor or select an item.

• Press the v button to activate the currently selected item or confirm a setting.

EXIT button : Press to exit the current menu.

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ▲▼◄► buttons to select the function, menu item, or option. The explanation will usually appear on the right side of the screen. A short description of each Settings function starts on the next page. Additional information on some of the functions is also in the Appendix of this manual.

EXIT

15 English

Settings

Settings Menu Functions

Picture

UHD Output

This option outputs HDMI video at UHD (Ultra High Definition) resolution. This is only available when Movie Frame is set to Auto.

| NOTE |

\To use this feature, you must connect the product to

a device that supports UHD resolution and you must have content that plays at 24fps (film speed).

\This device cannot play UHD contents However

contents with resolution lower than Full HD can be upscaled to UHD.

\For UHD resolution output, only 2160*3840 24 frame

rate output is available.

3D Settings

Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.

If you move to the Home or Apps screen while

in 3D mode, the product will switch to 2D mode automatically.

TV Aspect Ratio

Lets you adjust the output of the product to the screen size and screen format of your TV.

BD Wise

BD Wise is Samsung's latest inter-connectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu-ray Disc/DVD.

Resolution

Set the output resolution of the HDMI video signal to BD Wise, Auto, 1080p, 1080i, 720p or 576p/480p.

The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. Generally, the more lines, the higher quality.

Movie Frame (24fps)

If the product is connected to a 24fps compatible TV, setting the Movie Frame (24fps) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality.

•

You can enjoy the Movie Frame (24fps) feature only on a TV supporting this frame rate.

•

Movie Frame is only available when the product is in the HDMI 1080i or 1080p output resolution modes.

DVD 24fps Conversion

Converts DVD playback to 24 frames per second and outputs it via HDMI. This option is only available when Movie Frame (24fps) is set to on.

Fit Screen Size

Set the screen to the optimal size. (Apply Smart Hub, Screen Mirroring only)

HDMI Colour Format

Lets you set the Colour space format for the HDMI output so that it matches the capabilities of the connected device (TV, monitor, etc). The screen goes black momentarily after you have selected a format.

HDMI Deep Colour

Lets you set the product to output HDMI video with Deep Colour. Deep Colour provides more accurate Colour reproduction with greater Colour depth.

Progressive Mode

Lets you improve picture quality when viewing DVDs.

16 English

Sound

Speaker Settings

You can configure this product to connect to a Samsung Multiroom Link compatible speaker wirelessly and enjoy rich sound.

| NOTE |

\To use this feature, you must connect at least one

Samsung Multiroom Link speaker.

\Sound quality may be affected by the condition of your

wireless network.

\The network connection can be negatively affected

and even lost if the network environment deteriorates over time.

\Activating Screen Mirroring disables Multiroom Link.

\For further details, refer to the Multiroom Link manual

on the Samsung web site: www.samsung.com ;

; Search for Product name: BDH6500 ; Manuals ; Multiroom Link ; Download PDF

\The audio from each connected device may lag behind

the video and audio of the device which is playing the source contents.

Digital Output

Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For more details, see the digital output selection table on page 49.

PCM Downsampling

Lets you choose to have 96Khz PCM signals downsampled to 48Khz before they are outputted to an amplifier. Choose On if your amplifier or receiver is not compatible with a 96Khz signal.

Dynamic Range Control

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio.

Auto : Automatically controls the dynamic range

of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus.

Off : Leaves the dynamic range uncompressed,

letting you hear the original sound.

On : Turns dynamic range control on for all three

Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the product downmix to normal stereo or to surround compatible stereo.

DTS Neo:6 Mode

You can enjoy multichannel sound via HDMI output from a 2 channel audio source.

Audio Sync

In some cases when the product is connected to a digital TV, the audio signal may not synchronize with the video signal. If this occurs, adjust the audio delay time to match the video signal.

•

You can set the audio delay time between 0 msec and 250 msec. Adjust it to the optimal setting.

| NOTE |

\The audio delay time you specify may not be exact

depending on the played content.

Network

Network Status

Lets you check the current network and Internet status.

Network Settings

Configure the network connection so you can enjoy various features such as Internet services or AllShare functionality, and perform Software Updates.

04 Settings

17 English

Settings

Wi-Fi Direct

Lets you connect a Wi-Fi Direct device to the product using a peer-to-pear network, without the need for a wireless router. Note that if the product is connected to a wireless network, it may be disconnected when you use Wi-Fi Direct.

| NOTE |

\Text files, such as files with a .TXT or .DOC extension,

will not display when you are using the Wi-Fi Direct function.

Multimedia Device Settings

Lets you control which devices on your network, such as smart phones and tablets, can share content with your product.

Device Name

Lets you input a name for the product that will identify it on your networks.

BD-Live Settings

Set various BD-Live functions. BD-Live allows you to access extra features available on some Blu-ray Discs if you are connected to the Internet.

BD-Live Internet Connection : Lets you fully

allow, partly allow, or prohibit a BD-Live Internet connection.

BD Data Management :Manage BD data

downloaded from a BD-Live service or Blu-ray Disc.

Smart Hub

Apps Settings

Lets you configure App notification settings and view basic info about your Apps.

Push Notification Settings : Receive

notifications from selected services.

VOD Rating Lock

Lets you lock access to Video on Demand (VOD) content based on its rating. To use, you must enter the security PIN.

| NOTE |

\Depending on your country, this menu function may

not be supported.

Terms & Policy

You must review and agree to both the App Terms & Conditions and the privacy policy to use App services.

Samsung account Terms and Conditions, Privacy Policy

You can view and agree to the terms or privacy policy for your Samsung account and a variety of other services.

Reset Smart Hub

Resets all Smart Hub settings to their default settings. To use, you must enter the security PIN.

System

Setup

Lets you re-run the Initial Settings procedure.

Quick Start

Lets you set the product to turn on quickly by decreasing the boot time.

| NOTE |

\If this function is set to On, Standby power

consumption will be increased.

18 English

Language

You can select the language you prefer for the Onscreen menu, disc menu, audio, subtitles, etc.

•

The language you select for the disc menu, disc audio, or subtitles will only appear if it is supported on the disc.

Device Manager

You can connect a wireless USB keyboard or mouse to the USB port on the front of the product.

Keyboard Settings : Lets you configure a

wireless USB keyboard connected to the product.

| NOTE |

\You can use the keyboard only when a QWERTY

keyboard screen or window appears in the Web Browser.



Mouse Settings : Lets you configure a wireless USB mouse connected to the product. You can use the mouse in the product's menu and the Web Browser in the same way you use a mouse on your PC.

`To use a mouse with the product's menu:

1. Connect the USB mouse to the product.

2. Click the primary button you selected

in Mouse Settings. The Simple Menu appears.

3. Click the menu options you want.

| NOTE |

\Some USB HID keyboards and mice may not be

compatible with your product.

\Some HID keyboard keys may not work.

\Wired USB keyboards are not supported.

\Some applications may not be supported.

\If a wireless HID Keyboard does not operate because

of interference, move the keyboard closer to the product.

Security

The default security PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN. After you have accessed the security function for the first time, change the PIN using the Change PIN function.

BD Parental Rating : Prevents playback of

Blu-ray Discs with a rating equal to or above a specific age rating you have set unless you enter the PIN.

DVD Parental Rating : Prevents playback of

DVDs with a rating above a specific numerical rating you have set unless you enter the PIN.

Change PIN : Change the 4-digit PIN used to

access security functions.

`If you forget your PIN:

1. Remove any disc or USB storage device.

2. Press and hold the @ button on the top

panel for 5 seconds or more. The initialization message appears on the screen, and the power will turn off automatically. When you turn your product on again, all the settings will be reset.

General

You can change the options listed below to match your preferences.

Front Display : Change the brightness of the

front panel.

Time Zone : Select the time zone in which you

live.

Menu Transparency : Lets you adjust the

transparency of the menu box.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung product that have the Anynet+ feature and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using an HDMI cable.

04 Settings

19 English

+ 44 hidden pages