Samsung BD-H6500 User Manual [de]
BD-H6500
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Safety Information
Warning
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
• The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating,
these slots and openings must never be
blocked or covered.
- Do not place this apparatus in a confined
space, such as a bookcase, or built-in
cabinet, unless proper ventilation is provided.
- Do not place this apparatus near or over a
radiator or heat register, or where it is exposed
to direct sunlight.
- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
• Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorised
dealer immediately.
• This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of these
batteries properly. Please contact your local
authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can
result in fire or electric shock.
• Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from the
apparatus.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important
literature concerning operation and
maintenance has been included with this
product.
• To protect this apparatus from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the set due
to lightning and power line surges.
• Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
• To avoid electric shock, never touch the inside
of this apparatus. Only a qualified technician
should open this apparatus.
• Make sure to plug the power cord in until it is
firmly seated. When unplugging the power cord
from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the
power cord. Do not touch the power cord with
wet hands.
• If this apparatus does not operate normally in particular, if there are any unusual sounds or
smells coming from it - unplug it immediately
and contact an authorised dealer or service
Centre.
2 English
• Maintenance of Cabinet.
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
• Be sure to pull the power plug out of the outlet
if the product is to remain unused or if you are
leaving the house for an extended period of time
(especially when children, elderly, or disabled
people will be left alone in the house).
- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by causing
the power cord to generate sparks and heat
or the insulation to deteriorate.
• Contact an authorised service Centre for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may lead to serious damage of
your product.
• Use only a properly grounded plug and wall
outlet.
- An improper ground may cause electric shock
or equipment damage. (Class l Equipment
only.)
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (battery, etc.) in a location
safely out of the reach of children.
• Do not install the product in an unstable location
such as a shaky self, a slanted floor, or a
location exposed to vibration.
• Do not drop or strike the product. If the product
is damaged, disconnect the power cord and
contact a service Centre.
• To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergent. These
chemicals can damage the appearance of the
product or erase the printing on the product.
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
• Do not dispose of batteries in a fire.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
• There is danger of an explosion if you replace
the batteries used in the remote with the wrong
type of battery. Replace only with the same or
equivalent type.
• WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• WARNING - This product contains chemicals
known to the State of California to cause cancer
and reproductive toxicity.
CLASS 1 LASER product
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
CAUTION :
• THIS PRODUCT USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE PRODUCT CORRECTLY
AS INSTRUCTED.
01 Safety Information
3 English
Safety Information
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To prevent
electromagnetic interference with electric
appliances, such as radios and televisions, use
shielded cables and connectors for connections.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
| NOTES |
\If the Region number of a Blu-ray Disc/DVDs does not
correspond to the Region number of this product, the
product cannot play the disc.
IMPORTANT NOTE
The mains lead on this equipment is supplied with
a molded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362
of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to
reach a power point, you should obtain a suitable
safety approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains jack,
as there is a risk of shock hazard from the bared
flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user manual
is licenced under certain intellectual property rights
of certain third parties.
Precautions
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
4 English
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION
FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
• Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
• A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
• Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.).
• Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
• If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
player's HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
• The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
• The video resolution in 3D play mode is
determined by the resolution of the original 3D
video. You can not change the resolution.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46-inch screen, stay 138
inches (11.5 feet) from the screen.
• Place the 3D video screen at eye level for the
best 3D picture.
• When the player is connected to some 3D
devices, the 3D effect may not function properly.
• This player does not convert 2D content into
3D.
• "Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
01 Safety Information
5 English
Contents
SAFETY INFORMATION
2 Warning
4 Precautions
4 Important Safety Instructions
5 Using the 3D function
GETTING STARTED
8 Accessories
9 Front Panel
9 Rear Panel
10 Remote Control
10 Tour of the Remote Control
CONNECTIONS
11 Connecting to a TV
12 Connecting to an Audio System
12 Method 1 Connecting to an HDMI
supported AV receiver
12 Method 2 Connecting to an AV receiver
with Dolby Digital or DTS decoder
13 Connecting to a Network Router
13 Wired Network
13 Wireless Network
SETTINGS
14 The Initial Settings Procedure
14 The Home Screen
15 Accessing the Settings Screen
15 Buttons on the Remote Control Used for
the Settings Menu
16 Settings Menu Functions
16 Picture
17 Sound
17 Network
18 Smart Hub
18 System
20 Support
20 Networks and the Internet
20 Configuring Your Network Connection
23 Wi-Fi Direct
23 Upgrading Software
24 Update Now
24 Auto Update
MEDIA PLAY
26 Playing Commercial Discs
26 Disc Storage & Management
26 Playing Photos, Videos, and Music
(Multimedia)
26 Playing Media Content Saved on a USB
Device
27 Playing Media Content Saved in a
Computer/Mobile Device
27 Playing a Disc with User Recorded
Content
28 Playing Media Content Saved in a Cloud
Service
28 Samsung Link
29 Controlling Video Playback
29 Buttons on the Remote Control used for
Video Playback
29 Using the Settings Menu (During the
Playback)
31 Using the View & Options Menus
6 English
31 Controlling Music Playback
31 Buttons on the Remote Control used for
Music Playback
32 Using the Options Menu (During the
Playback)
32 Using the View & Options Menus (On a file
screen)
33 Repeating Tracks on an Audio CD
33 Shuffling Tracks on an Audio CD
33 Creating a Playlist from an Audio CD
33 Ripping
34 Playing Photo Contents
34 Using the Tools Menu (During Playback)
35 Using the View & Options Menus
36 Send files
36 Copying Videos, Music or Photos
36 Using the Send Function
NETWORK SERVICES
37 Creating a Samsung Account
37 Before Using Apps
38 Using Films and TV Shows
39 Using Apps
39 The Apps Screen at a Glance
40 Starting an Application
41 Screen mirroring
41 Using the Web Browser
42 Link Browsing and Pointer Browsing
42 The Control Panel at a Glance
43 Using the Setting Menu
45 Linking Your Internet Service Accounts
to the Product
45 BD-LIVE™
APPENDIX
46 Additional Information
46 Notes
48 Resolution according to the contents type
49 Digital Output Selection
50 Troubleshooting
52 Repairs
53 Disc and Format Compatibility
53 Disc types and contents your product can
play
53 Disc types your product cannot play
54 Region Code
54 Logos of Discs the product can play
55 Supported Formats
58 Compliance and Compatibility Notice
59 Copy Protection
59 Network Service Disclaimer
60 Licences
62 Specifications
Contents
7 English
Getting StartedGetting Started
Accessories
Check for the supplied accessories shown below.
Batteries for Remote Control (AAA Size)
User Manual Remote Control
SOURCE
VOL+
1
4
7
DISC MENU
SMART
HOME
HUB
RETURN
A B C D
SEARCH FULLSUBTITLE
AUDIO
PANDORA
DIGITAL
VOL VOL
– +
SAMSUNG TV
2
5
8
0
HOME
VOL–
3
6
9
TITLE MENU
POPUP
REPEAT
APPS
INFOTOOLS
EXIT
SCREEN
SUBTITLE
INPUT
8 English
Front Panel
PLAY/PAUSE BUTTON
STOP BUTTON
OPEN/CLOSE BUTTON
POWER BUTTON
DISC TRAY
| NOTE |
\To upgrade the product's software through the USB Host jack, you must use a USB memory stick.
\When the product displays the Blu-ray Disc's menu, you cannot start the movie by pressing the Play button on the product
or the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the v
button on the remote control.
DISPLAY
REMOTE CONTROL SENSOR
USB HOST
02 Getting Started
Rear Panel
HDMI OUT LAN
DIGITAL AUDIO OUT
9 English
Getting Started
Remote Control
Tour of the Remote Control
After setup, allows you to set the input
(This button is only available for Samsung TVs.)
Press to open and close the disc tray.
Press the number buttons to operate
Press to skip backwards or forwards.
Press to move to the Home screen.
These buttons are used both for menus
on the player and also several Blu-ray Disc
Use to access various audio functions on a
source on your TV.
Turn the player on and off.
options.
Use to enter the disc menu.
Press to stop a disc.
Press to use Apps.
Press to use the Tools menu.
Return to the previous menu.
functions.
Press to search contents.
disc.
SOURCE
VOL VOL
– +
VOL
+
SAMSUNG TV
1
2
4
5
7
8
DISC MENU
0
SMART
HOME
HOME
HUB
RETURN
A B C D
SEARCH FULLSUBTITLE
AUDIO
PANDORA
DIGITAL
SUBTITLE
VOL
–
3
6
9
TITLE MENU
POPUP
REPEAT
APPS
INFOTOOLS
EXIT
SCREEN
INPUT
Turn the TV on and off.
(This button is only available for Samsung
TV volume adjustment.
(This button is only available for Samsung TVs.)
Use to enter the Popup menu/Title menu.
Press to search backwards or forwards.
Press to pause a disc.
Press to play a disc.
Allows you to repeat a title, chapter, track
or disc.
Use to display the playback information.
Use to select menu items and change
menu values.
Press to exit the menu.
Press to use full screen function.
During the Blu-ray Disc/DVDs playback,
this button does not operate.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
TVs.)
Installing batteries
| NOTES |
\If the remote control does not operate properly:
- Check the polarity +/– of the batteries.
- Check if the batteries are drained.
- Check if the remote sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
| CAUTION |
\Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
10 English
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Audio
Video
| NOTE |
\If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO OUT on the
product to an audio system to hear audio.
\An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\When you connect the product to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the
product automatically sets the HDMI output resolution to the highest supported by the TV.
\A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\To view video in the HDMI 720p,1080i,1080p or 2160p output mode, you must use a High speed (category 2) HDMI cable.
\HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
03 Connections
11 English
Connections
Connecting to an Audio System
You can connect this product to the audio system using the methods illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder
• Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on the
product to the DIGITAL OPTICAL IN jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
12 English
Method 2Method 1
AudioAudio
Connecting to a Network Router
Wireless Network
You can connect your product to your network
router using one of the methods illustrated below.
To use the AllShare network functionality, you
must connect your PC to your network as shown
in the illustrations.
The connection can be wired or wireless.
Wired Network
Broadband modem
(with integrated router)
Broadband
Or
Router
Broadband
modem
| NOTE |
\Your router or your Internet Service Provider's policies
may prevent the product from accessing Samsung's
software update server. If this occurs, contact your
Internet Service Provider (ISP) for more information.
\DSL users, please use a router to make a network
connection.
service
Broadband
service
03 Connections
Wireless Router
Broadband
service
| NOTE |
\If your wireless router supports DHCP, this product can
use a DHCP or static IP address to connect to the wireless
network.
\Set your wireless router to Infrastructure mode. Ad-hoc
mode is not supported.
\The product supports only the following wireless security
key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\Select a channel on the wireless router that is not
currently being used. If the channel set for the wireless
router is currently being used by another device nearby, it
will result in interference and communication failure.
\If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will
not support a connection in compliance with new Wi-Fi
certification specifications.
\Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by other
radio devices, etc).
13 English
Settings
The Initial Settings Procedure
• The Home screen will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
After you have connected the product to your
TV, turn on the TV and product. When you turn
on the product the first time, the product's Initial
Settings screen appears on the TV. The Initial
Settings procedure lets you set the On Screen
Display (OSD) and menu languages, the aspect
ratio (screen size), and network configuration, and
connect the player to the Internet.
| NOTE |
\If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings later.
See "Configuring Your Network Connection" on pages
20~23 for instructions.
\If you want to display the Initial Settings screen again and
make changes, select Settings > System > Setup in
the Home screen or select the Reset option. (See pages
18 or 20)
\If you want to use an Anynet+(HDMI-CEC) function,
please follow the instructions below.
1) Connect the product to an Anynet+(HDMI-CEC)-
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in both the
TV and the product.
3) Set the TV to the Initial Settings Procedure.
The Home Screen
1 2
No Disc
RECOMMENDED MY APPS
WebBrowser
1 2 3
7 8 9 0
PLAY DISC : Lets you play photos, videos, or music
1
content from Disc.
2 3
FILMS AND TV SHOWS : Lets you view Films and
TV Shows from the Internet.
2
| NOTE |
\Depending on your country, this menu function
may not be supported.
MULTIMEDIA : Lets you play photos, videos, or
3
music content from USB or mobile devices, or PCs.
Sign In : Lets you log in with your Samsung account.
4
Search : Lets you search for contents in Films
and TV Shows, Apps and YouTube by entering
5
corresponding search words.
APPS : Gives you access to various applications you
6
can download.
RECOMMENDED : Gives you direct access to
7
recommended applications.
MY APPS : Apps downloaded from My Apps are
8
displayed.
Screen Mirroring : Lets you view the screen of
your smart phone or android tablet on a TV you
9
have connected to this product.
Settings : Opens the product's menu. In the menu
can set various functions to suit your personal
0
preferences.
MULTIMEDIAMOVIES & TV SHOWSPLAY DISC
Screen Mirroring
3 6
4 5
APPS
Settings
14 English
| NOTE |
1
4
7
VOL
+
2
5
8
0
VOL
–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
SAMSUNG TV
– +
HOME
REPEAT
\
If you leave the product in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the product is left in the screen saver mode for
more than 20 minutes, the power will automatically turn off.
Accessing the Settings Screen
Buttons on the Remote Control Used
for the Settings Menu
1
HOME
HUB
APPS
INFOTOOLS
04 Settings
1. Select Settings on the Home screen, and
then press v button. The Settings screen
appears.
Settings
Picture
Sound
Network
Smart Hub
System
Support
Picture
UHD Output Auto
3D Settings
TV Aspect Ratio 16:9 Original
BD Wise Off
Resolution Auto
Movie Frame (24fps) Auto
DVD 24fps Conversion Off
2. To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
3
2 4
HOME button : Press to move to the Home screen.
1
RETURN button : Press to return to the previous
2
menu.
v
RETURN
(Enter) / DIRECTION buttons :
• Press ▲▼◄► to move the cursor or select an
item.
3
• Press the v button to activate the currently
selected item or confirm a setting.
EXIT button : Press to exit the current menu.
4
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◄► buttons to select the
function, menu item, or option. The explanation
will usually appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
EXIT
15 English
Settings
Settings Menu Functions
Picture
UHD Output
This option outputs HDMI video at UHD (Ultra
High Definition) resolution. This is only available
when Movie Frame is set to Auto.
| NOTE |
\To use this feature, you must connect the product to
a device that supports UHD resolution and you must
have content that plays at 24fps (film speed).
\This device cannot play UHD contents However
contents with resolution lower than Full HD can be upscaled to UHD.
\For UHD resolution output, only 2160*3840 24 frame
rate output is available.
3D Settings
Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.
If you move to the Home or Apps screen while
in 3D mode, the product will switch to 2D mode
automatically.
TV Aspect Ratio
Lets you adjust the output of the product to the
screen size and screen format of your TV.
BD Wise
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Blu-ray Disc/DVD.
Resolution
Set the output resolution of the HDMI video
signal to BD Wise, Auto, 1080p, 1080i, 720p or
576p/480p.
The number indicates the number of lines of video
per frame.
The i and p indicate interlaced and progressive
scan, respectively. Generally, the more lines, the
higher quality.
Movie Frame (24fps)
If the product is connected to a 24fps compatible
TV, setting the Movie Frame (24fps) feature to
Auto lets the product adjust its HDMI output to
24 frames per second automatically for improved
picture quality.
•
You can enjoy the Movie Frame (24fps) feature
only on a TV supporting this frame rate.
•
Movie Frame is only available when the product
is in the HDMI 1080i or 1080p output resolution
modes.
DVD 24fps Conversion
Converts DVD playback to 24 frames per second
and outputs it via HDMI. This option is only
available when Movie Frame (24fps) is set to on.
Fit Screen Size
Set the screen to the optimal size. (Apply Smart
Hub, Screen Mirroring only)
HDMI Colour Format
Lets you set the Colour space format for the HDMI
output so that it matches the capabilities of the
connected device (TV, monitor, etc). The screen
goes black momentarily after you have selected a
format.
HDMI Deep Colour
Lets you set the product to output HDMI video
with Deep Colour. Deep Colour provides more
accurate Colour reproduction with greater Colour
depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
16 English
Sound
Digital Output
Lets you select the digital audio output format that
is suitable for your TV or AV Receiver. For more
details, see the digital output selection table on
page 49.
PCM Downsampling
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are outputted
to an amplifier. Choose On if your amplifier or
receiver is not compatible with a 96Khz signal.
Dynamic Range Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto : Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control on for Dolby Digital and
Dolby Digital Plus.
Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix method
that is compatible with your stereo system. You
can choose to have the product downmix to
normal stereo or to surround compatible stereo.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI
output from a 2 channel audio source.
Audio Sync
In some cases when the product is connected to
a digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
•
You can set the audio delay time between 0
msec and 250 msec. Adjust it to the optimal
setting.
| NOTE |
\The audio delay time you specify may not be exact
depending on the played content.
Network
Network Status
Lets you check the current network and Internet
status.
Network Settings
Configure the network connection so you can
enjoy various features such as Internet services
or AllShare functionality, and perform Software
Updates.
Wi-Fi Direct
Lets you connect a Wi-Fi Direct device to the
product using a peer-to-pear network, without the
need for a wireless router.
Note that if the product is connected to a wireless
network, it may be disconnected when you use
Wi-Fi Direct.
| NOTE |
\Text files, such as files with a .TXT or .DOC extension,
will not display when you are using the Wi-Fi Direct
function.
Multimedia Device Settings
Lets you control which devices on your network,
such as smart phones and tablets, can share
content with your product.
04 Settings
17 English
Settings
Device Name
Lets you input a name for the product that will
identify it on your networks.
BD-Live Settings
Set various BD-Live functions. BD-Live allows you
to access extra features available on some Blu-ray
Discs if you are connected to the Internet.
BD-Live Internet Connection : Lets you fully
allow, partly allow, or prohibit a BD-Live Internet
connection.
BD Data Management :Manage BD data
downloaded from a BD-Live service or Blu-ray
Disc.
Smart Hub
Apps Settings
Lets you configure App notification settings and
view basic info about your Apps.
Push Notification Settings : Receive
notifications from selected services.
VOD Rating Lock
Lets you lock access to Video on Demand (VOD)
content based on its rating. To use, you must
enter the security PIN.
| NOTE |
\Depending on your country, this menu function may
not be supported.
Terms & Policy
You must review and agree to both the App Terms
& Conditions and the privacy policy to use App
services.
Samsung account Terms and Conditions,
Privacy Policy
You can view and agree to the terms or privacy
policy for your Samsung account and a variety of
other services.
Reset Smart Hub
Resets all Smart Hub settings to their default
settings. To use, you must enter the security PIN.
System
Setup
Lets you re-run the Initial Settings procedure.
Quick Start
Lets you set the product to turn on quickly by
decreasing the boot time.
| NOTE |
\If this function is set to On, Standby power
consumption will be increased.
Language
You can select the language you prefer for the Onscreen menu, disc menu, audio, subtitles, etc.
•
The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
18 English
Device Manager
You can connect a wireless USB keyboard or
mouse to the USB port on the front of the product.
Keyboard Settings : Lets you configure a
wireless USB keyboard connected to the
product.
| NOTE |
\You can use the keyboard only when a QWERTY
keyboard screen or window appears in the Web
Browser.
Mouse Settings : Lets you configure a wireless
USB mouse connected to the product. You can
use the mouse in the product's menu and the
Web Browser in the same way you use a mouse
on your PC.
`To use a mouse with the product's menu:
1. Connect the USB mouse to the product.
2. Click the primary button you selected
in Mouse Settings. The Simple Menu
appears.
3. Click the menu options you want.
| NOTE |
\Some USB HID keyboards and mice may not be
compatible with your product.
\Some HID keyboard keys may not work.
\Wired USB keyboards are not supported.
\Some applications may not be supported.
\If a wireless HID Keyboard does not operate because
of interference, move the keyboard closer to the
product.
Security
The default security PIN is 0000. Enter the default
PIN to access the security function if you haven't
created your own PIN. After you have accessed
the security function for the first time, change the
PIN using the Change PIN function.
BD Parental Rating : Prevents playback of
Blu-ray Discs with a rating equal to or above
a specific age rating you have set unless you
enter the PIN.
DVD Parental Rating : Prevents playback of
DVDs with a rating above a specific numerical
rating you have set unless you enter the PIN.
Change PIN : Change the 4-digit PIN used to
access security functions.
`If you forget your PIN:
1. Remove any disc or USB storage device.
2. Press and hold the @ button on the top
panel for 5 seconds or more.
The initialization message appears on
the screen, and the power will turn off
automatically.
When you turn your product on again, all
the settings will be reset.
General
You can change the options listed below to match
your preferences.
Front Display : Change the brightness of the
front panel.
Time Zone : Select the time zone in which you
live.
Menu Transparency : Lets you adjust the
transparency of the menu box.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung product that
have the Anynet+ feature and lets you control
those products with one Samsung TV remote.
To operate this function, you must connect this
product to an Anynet+ Samsung TV using an
HDMI cable.
04 Settings
19 English
Settings
DivX® Video On Demand
View DivX® VOD Registration Codes to purchase
and play DivX® VOD contents.
Support
Remote Management
When activated, lets Samsung Call Centre agents
diagnose and fix problems with your player
remotely. Requires an active Internet connection.
| NOTE |
\Remote Management service might not be available in
some countries.
\To use Remote Management:
1) Call the Samsung Contact Centre and ask for
remote support.
2) Open the player's menu on your TV and go to the
Support section.
3) Select Remote Management, and then read and
agree to the service agreements. When the PIN
screen appears, provide the PIN number to the
agent.
4) The agent accesses your player.
Software Update
The Software Update menu allows you to
upgrade the product's software for performance
improvements or additional services.
Contact Samsung
Provides contact information for assistance with
your product.
Reset
Resets all settings to their default settings except
for the network and Smart Hub settings, and then
starts the Setup function. To use, you must enter
the security PIN. The default security PIN is 0000.
Networks and the Internet
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
37~45. Instructions for configuring the network
connection start below.
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the product to your router using a LAN cable
before you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
Ğ
Wired - Automatic
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press the
button.
v
4. Select Wired in the Network Settings
screen, and then press the v button.
5. Select the Connect button, and then press
the v button. The product detects the wired
connection, verifies the network connection
and then connects to the network.
20 English
Ğ
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and
then follow these steps:
1. Select Network Status. The product
searches for a network, and then displays the
connection failed message.
2. On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
3. Select the IP Setting field, and then press the
button.
v
4. Select Enter manually in the IP Setting field,
and then press the v button.
5. Select a value to enter (IP Address, for
example), and then press the v button.
Use the number keypad on your remote
control to enter the numbers for the value.
You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote
control to move from entry field to entry field
within a value. When done with one value,
press the v button.
6. Press the ▲ or ▼ button to move to another
value, and then enter the numbers for that
value following the instructions in Step 5.
7. Repeat Steps 5 and 6 until you have filled in
all values.
| NOTE |
\You can get the Network values from your Internet
provider.
8. When finished entering all the values, select
OK, and then press the v button. The
product verifies the network connection and
then connects to the network.
Wireless Network
You can set up a wireless network connection in
four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices currently
connected through the product or, if applicable,
the product's current wired connection, will be
disconnected.
Ğ
Wireless - Automatic
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press the
button.
v
4. Select Wireless in the Network Settings
screen, and then press the v button. The
product searches for and then displays a list
of the available networks.
Network Settings
Select your network type.
Network type Wireless
Wireless network
iptime23
iptime
solugen_edu#2
Refresh WPS(PBC)
You can connect your Bluray player to the internet.
Please select which wireless
network to use.
5. Select the desired network, and then press
the v button.
6. On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing v button.
04 Settings
21 English
Settings
| NOTE |
\To view the password as you enter it, use the arrow
buttons to select Show Password on the right side, and
then press v button.
7. When finished, select Done and then press
the v button. The product verifies the
network connection and then connects to the
network.
8. When verification is complete, select OK, and
then press the v button.
| NOTE |
\You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
Ğ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1. Follow the directions in Wireless - Automatic
through Step 5.
2. The product searches for a network, and
then displays the connection failed message.
3. On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
4. Select the IP Setting field, and then press the
button.
v
5. Select Enter manually in the IP Setting field,
and then press the v button.
6. Select a value to enter (IP Address, for
example), and then press v button. Use
the number keypad on your remote control
to enter the numbers for the value. You can
also enter numbers using the ▲▼ buttons.
Use the ◄► buttons on the remote control
to move from entry field to entry field within a
value. When done with one value, press the
button.
v
7. Press the ▲ or ▼ button to move to another
value, and then enter the numbers for that
value following the instructions in Step 6.
8. Repeat Steps 6 and 7 until you have filled in
all values.
| NOTE |
\You can get the Network values from your Internet
provider.
9. When finished, select OK, and then press the
button. The Security Screen appears.
v
10. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the ▲▼◄► buttons,
and then pressing the v button.
11. When finished, select Done at the right of the
screen, and then press the v button.
The product verifies the network connection
and then connects to the network.
12. After the product verifies the network, select
OK, and then press the v button.
Ğ
WPS(PBC)
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press the
button.
v
4. Select Wireless in the Network Settings
screen, and then press the v button.
5. Press the ▲ button on your remote, and then
press the ► button to select the WPS(PBC).
6. Press the v button on your remote. The
"Press the PBC button on your wireless
router within the next two minutes." message
appears.
7.
Press the WPS(PBC) button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
22 English
Ğ
WPS(PIN)
Before you begin, open the router's setup menu
on your PC and access the screen with the WPS
PIN entry field.
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press the
button.
v
4. Select Wireless in the Network Settings
screen, and then press the v button.
The product searches for and then displays a
list of the available networks.
5. Select the desired network, and then press
the ► button.
6. Select the WPS(PIN), and then press the
button. The PIN pop-up appears.
v
7. Enter the PIN into the WPS PIN entry field in
the router's Set Up screen and then save the
the screen.
| NOTE |
\Contact the manufacturer of the router for instructions
explaining how to access the route's Set Up screens or
refer to the router's user's manual.
\For a WPS connection, set your wireless router's security
encryption method to AES. WPS connections do not
support WEP security encryption.
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the product and each other
using a peer-to-peer network, without a wireless
router.
| NOTE |
\Bluetooth transmissions can interfere with the Wi-Fi
Direct signal. Before you use the Wi-Fi Direct function,
we strongly recommend that you turn off the Bluetooth
function of any active mobile device.
1. Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2. In the Home screen, select Settings, and
then press the v button.
3. Select Network, and then press the v
button.
4. Select Wi-Fi Direct, and then press the v
button.
The Wi-Fi Direct devices that you can
connect appear.
| NOTE |
\The current wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.
\Text files, such as files with a .TXT or .DOC extension, will
not display when you are using the Wi-Fi Direct function.
Upgrading Software
The Software Update menu allows you to
upgrade the product's software for performance
improvements or additional services.
• Never turn the product off or back on manually during
the update process.
1. In the Home screen, select the Settings, and
then press the v button.
2. Select Support, and then press the v
button.
3. Select Software Update, and then press the
button.
v
4. To download update software and update
now, select Update Now, and then press the
button.
v
5. To let the product download update software
automatically when available, select Auto
Update, and then press the v button. See
"Auto Update" on page 24 for details.
04 Settings
23 English
Settings
| NOTE |
\The upgrade is complete when the product turns off, and
then turns on again by itself.
\Samsung Electronics shall takes no legal responsibility
for product malfunction caused by an unstable Internet
connection or consumer negligence during a software
Update.
\If you want to cancel the upgrade while the upgrade
software is downloading, press the v button.
\When a system upgrade is in progress, "UPDATE" is
displayed on the front panel.
Update Now
You can use Update Now to update the software
through your network connection or by using a
USB flash drive. The network instructions are
below. The USB flash drive instructions are on the
next page.
1. Select Update Now, and then press the v
button.
The Update now pop-up appears.
2. The product searches on line for the latest
software version.
3. If it finds a new version, the Update Request
pop-up appears.
4. Select OK. The product upgrades the
software, turns off, and then turns on
automatically.
5. If you do not select OK or Cancel in one
minute, the product stores the new upgrade
software. You can upgrade the software later
using Auto Update.
6. If you select Cancel, the product cancels the
upgrade.
| NOTE |
\When the system upgrade is done, check the software
details in the Product Information section of the Contact
Samsung screen.
\Do not turn off the product during the Software Update. It
may cause the product to malfunction.
Auto Update
You can set the Auto Update function so that the
product downloads new upgrade software when it
is in Auto Update mode.
In Auto Update mode, the product is off, but
its Internet connection is active. This allows
the product to download upgrade software
automatically, when you are not using it.
1. Press the ▲▼ buttons to select Auto
Update, and then press the v button.
2. Select On. Then the product will be updated
automatically after power off. If it downloads
new upgrade software, the product will ask
you if you want to install it when you turn the
product on.
| NOTE |
\To use the Auto Update Mode Upgrade function, your
product must be connected to the Internet.
Update by USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com.
2. Click SUPPORT on the top right of the page.
3. Enter the product's model number into the
search field. As you enter the model number,
a drop down will display products that match
the model number.
4. Left click your product's model number in the
drop down list.
5. On the page that appears, scroll down to and
then click Firmware Manuals & Downloads.
6. Click Firmware in the Centre of the page.
7. Click the ZIP button in the File column on the
right side of the page.
8. Click Send in the first pop-up that appears.
Click OK in the second pop-up to download
and save the firmware file to your PC.
24 English
9. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
10. Copy the folder to a USB flash drive.
11. Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
12. In the product’s menu, go to Settings >
Support > Software Update.
13. Select Update Now.
14. The product searches for the software on the
USB drive. When it finds the software, the
Update Request pop-up appears.
15. Select OK. The product upgrades the
software, turns off, and then turns on
automatically.
| NOTE |
\There should be no disc in the product when you upgrade
the software using the USB jack.
\When the system upgrade is done, check the software
details in the Product Information section of the Contact
Samsung screen.
\Do not turn off the product during the Software Update.
It may cause the product to malfunction.
\Software Updates using the USB jack must be performed
with a USB flash memory stick only.
04 Settings
25 English
Media Play
Your product can play content located on Blu-ray/
DVD/CD discs, USB devices, and PCs. To play
content located on your PC, you must connect
your PC and the product to your network and Visit
the http://link.samsung.com site to download and
install the Samsung-link program.
| NOTE |
\
You can play contents on your PC using other programs
compatible with Allshare network software, however, we
recommend that you use Allshare network software.
Playing Commercial Discs
1. Press the 8 button to open the disc tray.
2. Place a disc gently into the disc tray with the
disc’s label facing up.
3. Press the 8 button to close the disc tray.
Playback starts automatically.
4. If playback does not start automatically, press
the 6 button on the remote control.
Disc Storage & Management
• Holding Discs
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
- When cleaning, wipe gently from the inside to
the outside of the disc.
• Disc Storage
`Do not keep in direct sunlight.
`Keep in a cool ventilated area.
`Keep in a clean protection jacket and store
vertically.
Playing Photos, Videos, and Music
(Multimedia)
You can play media content saved on a USB
device, smartphone, camera, computer, or cloud
service on the product.
| NOTE |
\
However, you cannot play media content if the content or
the storage device are not supported by the product.
\Backup important files before connecting a USB device.
Samsung shall not be held responsible for damaged or
lost files.
Playing Media Content Saved on a USB
Device
1. Connect your USB device to the product.
2. Press the HOME button and select Storage
in the MULTIMEDIA panel. The USB devices
connected to the product are listed.
3. Select the device you wish to connect to.
The folders and files in the selected USB are
listed.
4. Select the media content you wish to play
from the list. The media content plays.
| NOTE |
\Alternatively, move to the media content to play and press
the 6 button to play the content.
26 English
5. To exit, press the 5 button or RETURN
button.
| NOTE |
\If you connect a USB device to the product while watching
the product, a popup window appears on the screen so
that you can easily navigate the folders and files of the
USB device.
Playing Media Content Saved in a
Computer/Mobile Device
You can play media content on the product with a
computer or mobile device connected to the same
network as the product.
| NOTE |
\Only available with Samsung phones supporting DLNA
functionality.
\Samsung Link software should have been installed on the
computer. The mobile device should support Samsung
Link. For more information, visit Samsung’s content and
service portal at http://link.samsung.com.
\You may experience compatibility issues when attempting
to play media files via a third-party DLNA server.
\However, the content shared by a computer or a mobile
device may not play depending on the encoding type and
file format of the content. In addition, some functions may
not be available.
\The media content may not smoothly play depending on
the network status. If this is the case, use a USB storage
device.
1. Connect the smart device and product.
2. Press the HOME button and select Network
Device in the MULTIMEDIA panel. Storages
devices connected to the same network of
the product are listed.
3. Select a desired storage device. The folders
and files shared by the selected storage
device are listed.
4. Select the media content you wish to play
from the list. The media content plays.
| NOTE |
\Alternatively, move to the media content to play and press
the 6 button to play the content.
5. To exit, press the 5 button or RETURN
button.
Allowing Connection with a Mobile Device
(HOME Settings Network Multimedia
Device Settings)
To play the media content stored on a mobile
device, you must allow the connection between
the mobile device and the product.
| NOTE |
\You can connect to a mobile device on any DLNA DMC
device. DLNA DMC function enables users to connect a
mobile device to the product, search for media content,
and control play operations on the product.
1. Navigate to Settings > Network and select
Multimedia Device Settings. The mobile
devices connected to the same network as
the product are listed.
2. Allow connection with the device you wish
to connect to the product. You can only
play media files from devices that have been
allowed to connect to the product.
| NOTE |
\If a mobile device requests the media content to play, the
connection confirmation window appears on the product
so that you can easily connect a mobile device.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded
on Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the disc
tray with the disc’s label facing up, and then
close the tray. The Device Connected pop-up
appears.
2. Use the ▲▼ buttons to select the type of
content you want to view or play -
All Content, Photos, Videos or Music - and
then press the v button.
05 Media Play
27 English
Media Play
| NOTE |
\Even though the product will display folders for all content
types, it will only display files of the Content Type you
selected in Step 2. For example, if you selected music,
you will only be able to see music files. You can change
this selection by returning to the
and repeating Step 2.
3. A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
4. If necessary, use the ▲▼◄► buttons to
select a folder, and then press the v button.
5. Use the ▲▼◄► buttons to select a file to
view or play, and then press the v button.
6. Press the RETURN button one or more times
to exit a current screen, exit a folder, or to
return to the Home screen.
Press the EXIT button to return directly to the
Home Screen.
7. Go to pages 29~35 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
MULTIMEDIA
screen
Playing Media Content Saved in a
Cloud Service
Cloud service saves user content such as photos,
videos, and music files on a server so that it
can be played on the product connected to the
network. You can view the media content saved in
a cloud service such as Dropbox and OneDrive on
the product.
| NOTE |
\To play the content in a cloud service, you must log into
your Samsung account and link the Samsung account
to the cloud service account. For the information about
linking your Samsung account to a cloud service account,
see page 45.
1. Press the HOME button and select Cloud
Service in the MULTIMEDIA panel. The
cloud services linked with your Samsung
account appears.
2. Select a desired cloud service. The folders
and files in the selected cloud service are
listed.
3. Select media content you wish to play from
the list. The media content plays.
| NOTE |
\Alternatively, move to the media content to play and press
the 6 button to play the content.
4. To exit, press the 5 button or RETURN
button.
| NOTE |
\A Samsung smart device or a PC installed with the
Samsung Link app can be connected to the Blu-ray
product through a remote network.
\To connect devices through a remote network, the same
Samsung Account should be used to log in for both this
Blu-ray product and the device running the Samsung Link
app.
\For more information, visit the Samsung Content &
Service portal (http://link.samsung.com).
Samsung Link
For more information, visit the Samsung Content
& Service portal (http://link.samsung.com).
| NOTE |
\You may experience compatibility issues when attempting
to play media files via a third-party DLNA server.
28 English
Controlling Video Playback
1
4
VOL
+
2
5
VOL
–
3
6
SOURCE
VOL VOL
TV
– +
You can control the playback of video content located on a Disc, USB, mobile device or PC. Depending
on the disc or contents, some of the functions described in this manual may not be available.
05 Media Play
Buttons on the Remote Control used for Video Playback
7
8
0
HOME
9
TITLE MENU
POPUP
REPEAT
APPS
DISC MENU
SMART
HOME
HUB
Playback related buttons
The product does not play sound in Search, Slow
or Step mode.
• To return to normal speed playback, press the
button.
6
6
5
7
button
button
button
Starts playback.
Stops playback.
Pauses playback.
During playback, press the 3 or 4
Fast Motion
Play
button.
Each time you press the 3 or 4
button, the playback speed will change.
Slow Motion
Play
Step Motion
Play
In pause mode, press the 4 button.
Each time you press the 4 button, the
playback speed will change.
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
During playback, press the 1 or 2
Skip Motion
Play
button.
Each time you press 1 or 2 button,
the disc moves to the previous or next
chapter or file.
Using the disc menu, title menu, popup
menu, and title list
DISC MENU
button
During playback, press this button to
display the Disc menu.
During playback, press this button to
TITLE MENU
button
display the Title menu.
• If your disc has a playlist, press the
View to go to the playlist.
POPUP MENU
button
During playback, press this button to
display the Popup menu.
Using the Settings Menu (During the
Playback)
During playback or in pause mode, press the
TOOLS button.
Use the ▲▼◄► buttons to select the
and then press the v button.
Play from the
beginning
Select to return to the beginning of the
movie, and then press the v button.
- Search Titles : If there is more than
one movie on the disc or device,
select to start a different title.
1. Select Search Titles, and then
press the v button.
2. Use the ▲▼ buttons to select
a title, and then press the v
Select Scene
button.
- Chapter Search : Select to play the
chapter of your choice.
1. Select Chapter Search, and then
press the v button.
2. Use the ▲▼ buttons to select a
chapter, and then press the v
button.
button,
29 English
Media Play
Select Scene
3D
- Search Time Bar : Select to play
the movie from a selected time
point.
1. Select Search Time Bar, and then
press the v button.
2. Using the number buttons, enter
the time point you want to go to,
and then press the v button.
| NOTE |
\You can also use the ◄► buttons
to advance or rewind the movie.
The movie advances or rewinds
one minute each time you press the
◄► buttons.
\If the index information in the
file is damaged or the file does
not support indexing, you will not
be able to use the Select Scene
function.
\If you run files on network device
after you have connected the player
to a computer on your network,
Select Scene may not work.
Use the 3D menu when playing a 3D
file.
| NOTE |
\The 3D menu becomes available
only when you are playing a 3D
video file.
\When playing a 3D video, set the
player to Side by Side or Top and
Bottom in 3D Settings so that the
player's settings match the 3D
content format.
\If you move to the Home or Smart
Hub Home screen while in 3D
mode, the product will switch to 2D
automatically.
Search
Subtitle
Settings
Repeat mode
Rotate
Full Screen
Picture Mode
Audio
Audio Sync
Subtitle
Angle
Information
- Search Scene : You can use the
Search Scene function during
playback to view or start a movie
from the scene of your choice.
- Search Titles : If there is more than
one movie on the disc or device,
select to start a different title.
- Search Time Bar :
the movie from a selected time point.
Lets you set the desired subtitle
options.
Lets you repeat a title, chapter, or
specific section.
Lets you rotate the picture.
Lets you set the size of the video image.
Lets you set the picture mode.
- Dynamic : Increases sharpness and
brightness.
- Standard : Choose this setting for
most viewing applications.
- Movie : The best setting for
watching movies.
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
| NOTE |
\When you use the BD wise function,
this menu will not appear.
Use to set the desired audio language.
Select to set the audio sync.
Use to set the desired subtitle
language.
Lets you view a scene from another
angle. The Angle option displays the
number of angles available to view.
When a Blu-ray Disc/DVD contains
multiple angles of a particular scene,
you can change angle.
Lets you view video file information.
Select to play
30 English
Loading...