SAMSUNG BD-D6500 User Guide

Download

Page 1

BD-D6500

Blu-ray

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

™

Disc Player

Page 2

2 English

Key features

Blu-ray Disc Features

Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality.

The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.

Video highlights

The BD-ROM format supports three highly advanced video codecs, including AVC, VC-1 and MPEG-2.

HD video resolutions are also supported:

1920 x 1080 High Definition

• 1280 x 720 High Definition

•

For High-Definition Playback

To view high-definition contents on a Blu-ray Disc, you need an HDTV (High Definition Television). Some Blu-ray Discs may require you to use the player’s HDMI OUT to view high-definition content. The ability to view high-definition content on Blu-ray Discs may be limited depending on the resolution of your TV.

BD-LIVE

You can use a Blu-ray Disc that supports BDLIVE to download content provided by the disc manufacturer through a network connection.

Blu-ray Disc Player Features

This player can play 3D contents through an HDMI cable.

To implement the 3D effect, connect a 3D device (3D-compliant AV receiver, 3D-compliant TV) to the player using an HDMI cable, and play the 3D content while wearing 3D vision glasses.

Smart Hub

You can download various for pay or freeof-charge applications through a network connection. These applications provide a range of Internet services and content including news, weather forecasts, stock market quotes, games, movies, and music.

AllShare

You can play videos, music, and photos saved on your devices (such as your PC, mobile phones, or NAS) through a network connection.

Playing multimedia files

You can use the USB connection to play various kinds of multimedia files (MP3, JPEG, DivX, etc.) located from a USB storage device.

Page 3

English 3

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

Do not install this equipment in a confined space such as a bookcase or similar unit.

WARNING

To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.

CAUTION

Blu-ray Disc Player USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE Blu-ray Disc Player CORRECTLY AS INSTRUCTED.

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

This product satisfies CE regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

IMPORTANT NOTE

The mains lead on this equipment is supplied with a molded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.

If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.

However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains jack, as there is a risk of shock hazard from the bared flexible cord.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

The product unit accompanying this user manual is licenced under certain intellectual property rights of certain third parties. This licence is limited to private non-commercial use by end-user consumers for licenced contents.

No rights are granted for commercial use. The licence does not cover any product unit other

than this product unit and the licence does not extend to any unlicenced product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The licence only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this licence for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

This symbol indicates important instructions accompanying the product.

02 Safety Information

Page 4

4 English

Safety Information

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install

in accordance with the manufacturer’s instructions.

Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on

10.

or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified

11.

by the manufacturer.

Use only with the cart,

12.

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms

13.

or when unused for long periods of time.

Refer all servicing to qualified service

14.

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Viewing using 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

Some viewers may experience discomfort while

• viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

Watching 3D images for an extended period of

• time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

A responsible adult should frequently check on

• children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

Do not use the 3D Active Glasses for other

• purposes (such as general eyeglasses, sunglasses, protective goggles, etc.)

Do not use the 3D function or 3D Active Glasses

• while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

Page 5

English 5

02 Safety Information

Disc Storage & Management

Disc Handling

Disc Shape

Use discs with regular

• shapes. If you use an irregular disc (a disc with a special shape), you can damage the player.

Holding discs

Avoid touching the surface of

• a disc where data has been recorded.

Blu-ray Discs

Do not leave a Blu-ray Disc in the player for long

• periods of time. Remove the Blu-ray Disc from the player and store it in its case.

Be careful not to scratch or leave fingerprints on

• the surface of the Blu-ray Disc.

DVD-VIDEO, Audio CD (CD-DA)

Wipe off dirt or contamination on the disc with a

• soft cloth.

Disc Storage

Be careful not to damage the disc because the data on these discs is highly vulnerable to the environment.

Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

• If you move your player suddenly from a cold

• place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the player, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

Handling Cautions

Do not write on the printed side with a ball-point

• pen or pencil.

Do not use record cleaning sprays or antistatic

• sprays to clean discs. Also, do not use volatile chemicals, such as benzene or thinner.

Do not apply labels or stickers to discs. (Do not

• use discs fixed with exposed tape adhesive or leftover peeled-off stickers.)

Do not use scratch-proof protectors or covers.

• Do not use discs printed with label printers

• available on the market.

Do not load warped or cracked discs.

• Before connecting other components to this

• player, be sure to turn them off.

Do not move the player while it is playing a disc.

• The disc can be scratched or damaged and the player’s internal parts can be damaged.

Do not put a flower vase filled with water or any

• small metal objects on the player.

Be careful not to put your hand into the disc

• slot.

Do not place anything other than the disc in the

• disc slot.

Interference from exterior sources such as

• lightening and static electricity can affect the normal operation of this player. If this occurs, turn the player off and on again with the 电源 button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.

Be sure to remove the disc and turn off the

• player after use.

Disconnect the AC power cord from the AC

• outlet when you don’t intend to use the player for long periods of time.

To clean a disc, wipe it in a straight

• line from the inside to the outside of the disc.

Do not expose the player to any

• liquid.

When the AC plug is connected to a wall outlet,

• the player will still draw power (standby mode) when it is turned off.

Page 6

6 English

Safety Information

Apparatus shall not be exposed to dripping or

• splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

The main plug is used as a disconnect device

• and shall stay readily operable at any time.

Maintenance of Cabinet

Before you clean the Blu-ray Disc’s cabinet, be sure to disconnect the AC power cord from the AC outlet.

Do not use benzene, thinner, or other solvents

• for cleaning.

Wipe the cabinet with a soft cloth.

•

Restrictions on Playback

This player may not respond to all operating

• commands because some Blu-ray Disc, DVD, and CD discs allow specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the player.

Samsung cannot guarantee that this player

• will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs. Please contact the SAMSUNG customer care centre if you have questions or encounter difficulty in playing Blu-ray Disc, DVD, or CD discs in this player. Also, refer to rest of this user manual for additional information on playback restrictions.

Page 7

English 7

Contents

KEY FEATURES

SAFETY INFORMATION

GETTING STARTED

2 Blu-ray Disc Features 2

Blu-ray Disc Player Features

3 Warning 4

Precautions

4 Important Safety Instructions 4 Viewing using 3D function 5

Disc Storage & Management

5 Disc Handling

11 Before using the User Manual 11 Disc Types and Contents your player can play 11 12 12 13 13 14 15 15 Accessories 16 17 18 18 Tour of the Remote Control 19

Disc types your player cannot play Blu-ray Disc Compatibility Disc Types Region Code Copyright Supported File Formats Logos of Discs the player can play

Front Panel Rear Panel Remote Control

Setting the Remote Control to Operate Your TV

ENGLISH

CONNECTIONS

20 Connecting to a TV 20 Case 1 : Connecting to a TV with an HDMI Cable

- Best Quality (Recommended) Case 2 : Connecting to a TV with a Component

Cable - Better Quality Case 3 : Connecting to a TV with an Audio/Video

cable - Good Quality

Page 8

8 English

Contents

CONNECTIONS

SETUP

23 Connecting to an Audio System 23 Case 1 : Connecting to an Audio System

25 Connecting to the Network 25 Cable Network 26

27 Initial Settings 28 29 29 3D Settings 30 30 30 30 32 32 33 33 33 33 Audio 33 Digital Output 35 35 35 35 36 Network 36 Network Settings 39 40

(HDMI supported AV receiver) (Recommended)

Case 2 : Connecting to an Audio System (AV receiver with Dolby Digital or DTS decoder)

- Better Quality Case 3 : Connecting to an Audio System

(Stereo Amplifier) - Good Quality

Wireless Network

Accessing the Settings Menu Display

TV Aspect Smart Hub Screen Size BD Wise (Samsung Players only) Resolution HDMI Color Format Movie Frame (24Fs) HDMI Deep Color Still Mode Progressive Mode

PCM Downsampling Dynamic Range Control Downmixing Mode DTS Neo:6 Mode

Network Status BD-LIVE Internet Connection

- Best Quality

Page 9

English 9

ENGLISH

SETUP

40 System 40 Initial Settings 40 40 41 41 41 41 Language 41 Security 41 BD Parental Rating 41 41 42 General 42 Front Display 42 42 42 Support 42 Software Upgrade 44

Anynet+(HDMI-CEC) BD Data Management Time Zone DivX® Video On Demand Reset

DVD Parental Rating Change Password

Light Effect Network Remote Control

Contact Samsung

BASIC FUNCTIONS

45 Playing a Video 45 Playback 45 45 Using the Disc Menu/Title Menu/Popup Menu 45 Using the Disc Menu 46 46 46 46 Using the Search and Skip Functions 46 Searching for a Desired Scene 46 47 Repeat Playback 47 Repeat the Title or Chapter 47

Disc Structure

Using the Title Menu Playing the Title List Using the Popup Menu

Skipping Chapters

Repeat the Section

Page 10

10 English

Contents

BASIC FUNCTIONS

NETWORK SERVICES

47 Slow Motion Play/Step Motion Play 47 Slow Motion Play 47 48 Using the 工具 button 48 Moving to a Desired Scene Directly 48 48 48 49 49 49 50 Listening to Music 50 Buttons on the Remote Control used for Music

50 51 51 52 Playing back Pictures 52 Playing a JPEG files 52 53 Playing back a USB Storage Device

54 Using Smart Hub 54 Starting Smart Hub for the First Time 57 59 61 61 Samsung Apps 61 For Pay Apps 63 BD-LIVE™ 63

Step Motion Play

Changing to Full Screen Selecting the Picture Settings Selecting the Audio Language Selecting the Subtitle Language Changing the Camera Angle Setting BONUSVIEW

Playback Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3 Playlist

Using the 工具 button

The Settings Menu - BLUE (D) The Edit Mode Menu - YELLOW (C) The Sort Menu - GREEN (B)

Using the AllShare Function

APPENDIX

64 Troubleshooting 66 Repairs 67 Specifications

Page 11

English 11

Getting Started

Before using the User Manual

Disc Types and Contents your player can play

Term Logo Icon Definition

Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

VIDEO

Indicates a function available on a DVD-VIDEO or recorded DVD+RW/ DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized.

Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB storage media containing DivX, MKV, MP4 contents.

Indicates a function available on an audio CD-RW/-R (CD-DA format).

Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB storage media containing MP3 or WMA contents.

Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB storage media containing JPEG contents.

MUSIC

PHOTO

x o

03 Getting Started

NOTE

✎

The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

▪

If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.

▪

Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

▪

Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.

▪

Disc types your player cannot play

HD DVD

• DVD-ROM/PD/MV-

• Disc, etc

DVD-RAM

• Super Audio CD

• (except CD layer)

DVD-RW(VR mode)

• CVD/CD-ROM/CDV/

• CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)

3.9 GB DVD-R Disc for

• Authoring.

Page 12

12 English

Getting Started

NOTE

✎

Some commercial discs and DVDs purchased

▪

outside your region may not play on this player.

Playback may not work for some types of discs, or

▪

when you use specific operations, such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

Do not allow the disc to become dirty or scratched.

▪

Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback.

When you play a BD-J title, loading may take longer

▪

than a normal title or some functions may perform slowly.

This player may not respond to all operating

▪

commands because some Blu-ray Disc, DVD, and CD discs allow specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the player.

Samsung cannot guarantee that this player will play

▪

every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs. Please contact the SAMSUNG customer care centre if you have questions or encounter difficulty when playing Blu-ray Disc, DVD, or CD discs in this player. Also, refer to rest of this user manual for additional information on playback restrictions.

Disc Types

BD-ROM

Blu-ray ROM discs can only be played back. This player can play back pre-recorded commercial BD-ROM discs.

BD-RE/-R

Blu-ray RE/-R discs can be recorded on and played back. This player can play back a BD-RE/-R disc recorded by other compatible Blu-ray Disc recorders.

DVD-VIDEO

This player can play back pre-recorded

• commercial DVDs (DVD-VIDEO discs) with movies.

When switching from the first layer to the

• second layer of a dual-layered DVD-VIDEO disc, there may be momentary distortion in the image and sound. This is not a malfunction of the player.

DVD-RW/-R/+R

This player can play back a DVD-RW/-R/+R disc recorded and finalized with a DVD video recorder. The ability to play back may depend on recording conditions.

Blu-ray Disc Compatibility

Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Compliance and Compatibility Notice section of this user manual.

DVD+RW

This player can play back a DVD+RW disc

• recorded with a DVD Video recorder. The ability to play back may depend on recording conditions.

Audio CD (CD-DA)

This player can play back CD-DA format audio

• CD-RW/-R discs.

The player may not be able to play some

• CD-RW/-R discs due to the condition of the recording.

Page 13

English 13

03 Getting Started

CD-RW/-R

Use a 700MB (80 minute) CD-RW/-R disc.

• If possible, do not use an 800MB (90 minute) or larger disc, as the disc may not play back.

If the CD-RW/-R disc was not recorded as a

• closed session, you may experience delays when playing back the beginning of the disc or all recorded files may not play.

Some CD-RW/-R discs may not play on this

• player, depending on the device which was used to burn them. For contents recorded on CD-RW/-R media from CDs for your personal use, playability may vary depending on the contents and discs.

Region Code

Both players and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this player is displayed on the rear panel of the player.

Disc Type

Region

Code

North America, Central America, South America, Korea, Japan,

Taiwan, Hong Kong and South East Asia.

Area

AVCHD (Advanced Video Codec High Definition)

This player can play back AVCHD format discs.

• These discs are normally recorded and used in camcorders.

The AVCHD format is a high definition digital

• video camera format.

The MPEG-4 AVC/H.264 format compresses

• images with greater efficiency than the conventional image compressing format.

Some AVCHD discs use the “x.v.Color” format.

• This player can play back AVCHD discs that use “x.v.Color” format.

“x.v.Color” is a trademark of Sony Corporation.

• “AVCHD” and the AVCHD logo are trademarks

• of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.

NOTE

✎

Some AVCHD format discs may not play, depending

▪

on the recording condition. AVCHD format discs need to be finalized.

“x.v.Color” offers a wider colour range than normal

▪

DVD camcorder discs.

Some DivX, MKV and MP4 format discs may not

▪

play, depending on the video resolution and frame rate condition.

Blu-ray Disc

DVD-VIDEO

Europe, Greenland, French territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central

and South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America, Central America, Australia,

New Zealand, Pacific Islands, Caribbean

Russia, Eastern Europe, India, most of Africa, North Korea,

Mongolia

China

manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.

Page 14

14 English

Getting Started

Supported File Formats

Notes on the USB connection

Your player supports USB storage media, MP3 players, digital cameras, and USB card readers.

• The player does not support folder or file names longer than 128 characters.

• Some USB/digital camera devices may not be compatible with the player.

• Your player supports the FAT16, FAT32, and NTFS files systems.

• Connect USB devices directly to the player’s USB port. Connecting through a USB cable may cause

• compatibility problems.

Inserting more than one memory device into a multi-card reader may cause the reader to operate

• improperly.

The player does not support the PTP protocol.

• Do not disconnect a USB device during a “loading” process.

• The bigger the image resolution, the longer the image takes to display.

• This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial

• sites.

External HDD device is not supported.

• Your player only supports the video that is under 30fps (frame rate).

•

Video File Support

File Extension Container Video Codec Audio Codec Resolution

*.avi

*.mkv

*.wmv

*.mp4

*.mpg

*.mpeg

AVI

MKV

WMV (wmv9)

MP4

DivX 3.11/4.x/5.1/6.0

XviD

MP4v3

H.264 BP/MP/HP

VC-1 AP

DivX 5.1/6.0

XviD

H.264 BP/MP/HP

VC-1 AP

VC-1 SM

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1 MPEG2

H.264 BP/MP/HP

MP3 AC3

DTS

WMA

PCM

MP3 AC3

DTS

WMA

AAC

MP1, 2

AC3

DTS

1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080

Music File Support

File Extension Container Audio Codec Support Range

*.mp3

*.wma

MP3

WMA

MP3 -

Compliant with WMA version 10

WMA

* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48 * Bit rates - All bit-rates in the range 5kbps to 384kbps

Page 15

English 15

03 Getting Started

Logos of Discs the player can play

2D�3D

1 2 3

4 5 6

7 8 9

Blu-ray Disc 3D Blu-ray Disc DTS-HD Master Audio DivX

BD-LIVE Dolby TrueHD

Check for the supplied accessories below.

Audio/Video cable Batteries for Remote Control (AAA Size)

User Manual Remote Control

PAL broadcast System in U.K.,

France, Germany, etc.

Accessories

Java

Page 16

16 English

Getting Started

5V 500mA

b ca

REMOTE CONTROL SENSOR Detects signals from the remote control.

POWER BUTTON Turns the player on and off.

Front Panel

h g f e d

DISC SLOT Inserts a disc.

EJECT BUTTON Ejects a disc.

ENTER BUTTON Selects menu items or starts a disc.

PLAY/PAUSE BUTTON Plays a disc or pauses playback.

STOP BUTTON Stops disc playback.

DISPLAY Displays the playing status, time, etc.

USB HOST

NOTE

✎

You can perform software upgrades using the USB Host jack with a USB memory flash stick only.

▪

When the player displays the Blu-ray Disc menu, you may not start the movie by pressing the Play button on the player

▪

or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the ENTER button.

You can connect a USB memory flash stick here and use it as storage when the player is connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.

Page 17

English 17

03 Getting Started

Rear Panel

b ca

f e

DIGITAL AUDIO OUT Connects to an AV receiver.

LAN

HDMI OUT

COMPONENT OUT Connects to external devices that have Component video input.

Use for network based services (See pages 54~63), BD-LIVE, and software upgrades using a network connection.

Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture or to your AV receiver for the best quality sound.

VIDEO OUT Connects to the video input of external devices using a video cable.

AUDIO OUT Connects to the audio input of external devices using audio cables.

Page 18

18 English

Getting Started

INTERNET@

1 2

4 5 6

7 8 9

Tour of the Remote Control

Remote Control

Turn the player on and off.

Press to eject a disc.

Press to use the bonusview function.

Press numeric buttons to operate options.

Press to switch the Blu-ray Disc/DVD’s

Press to skip backwards or forwards.

Press to move to the home menu.

Return to the previous menu.

subtitle language.

Press to stop a disc.

Use to enter the disc menu.

Press to use Tools menu.

Press to use Smart Hub.

Press to search contents.

TV volume adjustment.

Mutes the speakers of your TV.

Turn the TV on and off. (To operate your TV, please refer to page

19)

After setup, allows you to set the input source on your TV.

Use to access various audio functions on a disc (Blu-ray Disc/DVD).

Press to search a disc backwards or forwards.

Press to pause a disc.

Press to play a disc.

Use to enter the popup menu/title menu.

Use to display the playback information during playing a Blu-ray Disc/DVDs.

Use to select menu items and change menu value.

Press to exit the menu.

These buttons are used both for menus on the player and also several Blu-ray Disc functions.

Allows you to repeat a title, chapter, track or disc.

Use to select a TV channel.

Installing batteries

NOTE

✎

If the remote does not operate properly:

▪

Check the polarity +/– of the batteries.

•

Check if the batteries are drained.

•

Check if the remote sensor is blocked by obstacles.

•

Check if there is any fluorescent lighting nearby.

•

CAUTION

Dispose of batteries according to local environmental

▪

regulations. Do not put them in the household trash.

Page 19

English 19

03 Getting Started

Setting the Remote Control to Operate Your TV

You can control certain functions of your TV with this remote control.

Button Function

电视电源

电视节目源

电视音量

电视频道

电视静音

NOTE

✎

▪

To determine whether your television is compatible, follow the instructions below.

Switch your television on.

Point the remote control towards the

television.

Press and hold the

enter the two-figure code in the table to the right that corresponds to the brand of your television by pressing the appropriate number buttons. If your television is compatible with the remote control, it will switch off. The remote is now programmed to operate the TV.

NOTE

✎

▪

Used to switch the television on and off.

Used to select an external source connected to the TV.

(+/–)

Used to adjust the volume of the television.

(,/.)

Used to select the desired channel.

Used to toggle the sound on and off.

The functions listed above will not necessarily work on all televisions. If you encounter problems, use the TV remote control.

电视电源

button, and then

If several codes are listed for your television brand, try each one in turn until you find one that works.

If you replace the remote control’s batteries, you must set the brand code again.

TV Control Codes

Brand Code

+01, +02,

AIWA

ANAM

BRANDT

CGE

EDISON

DAEWOO

FINLUX

FUJITSU

GRUNDIG

HITACHI

JVC

LOEWE

METZ

MIVAR

NEC

NEWSAN

电视电源

+03, +04, +05, +06, +07, +08, +09

+82

电视电源

+10, +11,

电视电源

+12, +13, +14, +15, +16, +17, +18

+57

电视电源

+71

电视电源

+73

电视电源

+57

电视电源

+52

电视电源

+75

电视电源

+19, +20,

电视电源

+23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34

+64

电视电源

+73

电视电源

+06, +49,

电视电源

+57

电视电源

+84

电视电源

+70

电视电源

+49, +52,

电视电源

+71

+60, +72,

电视电源

+73, +75

+52

电视电源

+61, +79

电视电源

+06, +19,

电视电源

+20, +21, +22, +78

+06, +69

电视电源

+06, +57

电视电源

+40

电视电源

+57

电视电源

+06, +48,

电视电源

+62, +65

+52, +77

电视电源

+83

电视电源

+68

电视电源

SAMSUNG

BANG & OLUFSEN

BLAUPUNKT

BRIONVEGA

CONTINENTAL

EMERSON

FERGUSON

FORMENTI

GRADIENTE

IMPERIAL

LOEWE OPTA

MAGNAVOX

MITSUBISHI

Brand Code

NOBLEX

电视电源

NOKIA

电视电源

PHILIPS

PIONEER

RADIOLA

RCA

REX

SABA

SALORA

SANYO

SELECO

SHARP

SIEMENS

SINGER

SONY

TELEAVA

TOSHIBA

WEGA

YOKO

ZENITH

电视电源

+75

电视电源

+74, +75

电视电源

+56, +57

电视电源

+57

电视电源

+73, +74

电视电源

+73, +74, +75

电视电源

+43, +44, +48

电视电源

+38, +39, +48

电视电源

+75, +76

电视电源

+75

电视电源

+49, +50, +51, +52

电视电源

NORDMENDE

PANASONIC

PHONOLA

RADIOMARELLI

SCHNEIDER

SINUDYNE

TELEFUNKEN

THOMSON

THOMSON ASIA

+66

+74

+72, +73,

+53, +54,

+06, +55,

+06, +56,

+58, +59,

+06, +56

+57

+45, +46

+74

+57, +72,

+74

+41, +42,

+06

+74

+36, +37,

+71

+57

+35, +48

+73

+67, +73,

+72, +73,

+80, +81

+47, +48,

+57

+06

+63

Page 20

20 English

Connections

Connecting to a TV

Case 1 : Connecting to a TV with an HDMI Cable - Best Quality (Recommended)

Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN

terminal of your TV.

Turn on the player and TV.

Press the input selector on your TV remote control until the HDMI signal from the player appears on

your TV screen.

If you have set the remote control to operate your TV (See page 19), press the

• on the remote control and select HDMI as the external source of the TV.

HDMI cable

(not included)

电视节目源

button

NOTE

✎

An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.

▪

If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed

▪

(category 2) HDMI cable.

HDMI outputs only a pure digital signal to the TV.

▪

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

▪

When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output

▪

resolution will be automatically set to the highest supported by the TV.

You must have an HDMI connection to enjoy videos with 3D technology.

▪

A long HDMI cable may cause a screen noise. If this occurs, set Deep Colour to Off in the menu.

▪

If you use HDMI-to-DVI cable to connect to your display device, you must also connect the AV Out or Digital Audio Out to

▪

your display device or an audio sytem to hear audio.

Page 21

English 21

04 Connections

Case 2 : Connecting to a TV with a Component Cable - Better Quality

You can connect the player to your TV using Component video cables.

You will enjoy high quality images with accurate colour reproduction. Component video separates

the picture element into black and white (Y), blue (PB) and red (PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

Using a Component video cable, connect the COMPONENT OUT terminals on the rear of the player

to the COMPONENT IN terminals of your TV. Using audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player to

the AUDIO IN (red and white) terminals of your TV.

Turn on the player and TV.

Press the input selector on your TV remote control until the “COMPONENT” signal from the player

appears on the TV screen.

If you have set the remote control to operate your TV (See page 19), press the

• on the remote control and select COMPONENT as the external source of the TV.

Audio cable

电视节目源

Component cable

button

(not included)

Red

White Red Blue Green

NOTE

✎

Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y ” or “Cr, Cb, Y”

▪

instead of “PB, PR, Y”. The number and position of terminals may vary depending on the TV set. Please refer to the user manual of your TV.

You can select from a variety of resolution settings as 1080i, 720p, 576p/480p, or 576i/480i depending on the

▪

contents type. (See pages 30~32)

The actual resolution may differ from the setting in the setup menu if you have connected both Component and HDMI

▪

cables. The resolution may also be different depending on the contents type. (See pages 30~32)

Page 22

22 English

Connections

Case 3 : Connecting to a TV with an Audio/Video cable - Good Quality

Using an Audio/Video cable, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)

terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of your TV.

Turn on the player and TV.

Press the input selector on your TV remote control until the “VIDEO” signal from the player appears

on the TV screen.

If you have set the remote control to operate your TV (See page 19), press the

• on the remote control and select VIDEO as the external source of the TV.

电视节目源

Audio/Video cable

button

WhiteRed Yellow

NOTE

✎

Noise may be generated if the audio cable is placed too close to the power cable.

▪

If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 23~24)

▪

The number and position of input terminals may vary depending on your TV set. Please refer to the user manual of your

▪

TV.

CAUTION

Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright

▪

protection systems and the picture will be distorted on the television.

Page 23

English 23

04 Connections

Connecting to an Audio System

Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause

• damage to the speakers and your ears.

Set the audio output format according to the capabilities of your AV receiver. (See pages 33~35)

• The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the

• user manual of your AV receiver.

Case 1 : Connecting to an Audio System (HDMI supported AV receiver)

- Best Quality (Recommended)

Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN

terminal of your AV receiver. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN terminal of

your TV.

Turn on the player, TV, and AV receiver.

Press the input select button of the AV receiver and TV to select the external input to hear sound

from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.

HDMI cable

(not included)

HDMI cable

(not included)

Page 24

24 English

Connections

Case 2 : Connecting to an Audio System (AV receiver with Dolby Digital or DTS decoder) - Better Quality

Using an optical cable, connect the DIGITAL

1. AUDIO OUT (OPTICAL) terminal on the rear of the player to the DIGITAL AUDIO IN (OPTICAL) terminal of your AV receiver.

Using the video signal cable(s), connect

the HDMI, COMPONENT, or VIDEO OUT terminals on the rear of the player to the HDMI, COMPONENT, or VIDEO IN terminal of your TV. (See pages 20~22)

Turn on the player, TV, and AV receiver.

Press the input select button of the

to select the external input and hear sound from the player. Refer to your manual to set the

Press the input selector on your TV remote

control to select the video source (HDMI, Component, or Video.)

AV receiver’s

receiver

user

audio input.

Case 3 : Connecting to an Audio System (Stereo Amplifier)

- Good Quality

Using the audio cables, connect the AUDIO

1. OUT (red and white) terminals on the rear of

the player to the AUDIO IN (red and white) terminals of your Stereo Amplifier.

Using the video signal cable(s), connect

the HDMI, COMPONENT, or VIDEO OUT terminals on the rear of the player to the HDMI, COMPONENT, or VIDEO IN terminal of your TV. (See pages 20~22)

Turn on the player, TV and Stereo Amplifier.

Press the input select button of the

Amplifier

to select the external input in order to hear sound from the player. Refer to your Stereo Amplifier’s Amplifier’s

Press the input selector on your TV remote control to select the video source (HDMI, Component, or Video.)

user manual to set the

audio input.

Stereo

Case 2 : Optical cable

(not included)

WhiteRed

NOTE

✎

If you use the Digital Audio connection described in Case 2, you will hear only front two speakers with Digital Output

▪

setting as PCM.

Case 3 : Audio cable

Page 25

English 25

04 Connections

Connecting to the Network

This player lets you use network based services (See pages 54~63) such as Smart Hub and BD-LIVE, and software upgrades when it is connected to a network. We recommend using an AP (Access Point) or IP router for the connection. For more information on router connections, refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network

Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal

of your modem or router.

To set the network options, see pages 36~40.

Router

Broadband modem

(with integrated router)

Broadband

service

NOTE

✎

Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s

▪

policy. For more information, contact your ISP (Internet Service Provider).

For DSL users, please use a router to make a network connection.

▪

To use the AllShare function, you must connect your PC to your network as shown in the figure.

▪

The connection can be wired or wireless.

Networking with PC for AllShare function

Broadband modem

Broadband service

Page 26

26 English

Connections

Wireless Network

Your player has built in Wi-Fi capability. You can connect to a network through a Wireless IP sharer (a router or modem). To set the network options, see pages 36~40.

Broadband

service

Networking with PC for AllShare function

NOTE

✎

To use a wireless network, your player must be connected to a wireless IP sharer (router). If the wireless IP sharer

▪

supports DHCP, your player can use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer

▪

is currently being used by another device nearby, this will result in interference and communication failure. If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-

▪

AES (WPS2Mixed) for your AP, this player will not support a connection in compliance with new Wi-Fi certification specifications.

If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration)

▪

or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. You can setup a wireless network three ways:

▪

Wireless (General)

Using WPS(PBC).

One Foot Connection

Wireless (General) includes both Automatic and Manual setup procedures.

Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance,

▪

obstacles, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

▪

The player supports only the following wireless security key protocols :

▪

WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

To use the AllShare function, you must connect your PC to your network as shown in the figure.

▪

The connection can be wired or wireless.

Wireless IP sharer

Page 27

English 27

Setup

Initial Settings

Turn on your TV after connecting the player.

When you connect the player to a TV for the first time, player turns on automatically and the Initial Settings screen appears.

初始设置

屏幕语言

选择屏幕显示的语言。

English 中文

< 移动 "

确认

Press the ◄► buttons to select the desired

language, and then press the ENTER button. Press the ENTER button to select Start.

Press the ▲▼ buttons to select the desired

TV Aspect Ratio, and then press the ENTER button. (See page 30)

Press the ▲▼ buttons to select the desired

5. Network Settings : Wired, Wireless (General), WPS(PBC) or One Foot Connection, and then press the ENTER

button. If you do not know the details of your Network Settings, press the BLUE (D) button on your remote instead to skip Network Settings here, finish the Initial Settings, and go to the Home menu. If you selected a Network Setting, go to pages 36~40 for more information about the Network settings. When done, go to Step 6.

The Home menu appears. (For more

information about the Home menu, please see page 28.)

Home Menu

•

My Contents

Videos

Photos

Music

My Devices Internet Settings

NOTE

✎

When the player is connected to the TV for the first

▪

time, the player turns on automatically. This is not a malfunction.

The Home menu will not appear if you do not

▪

configure the initial settings except as noted below.

If you press the BLUE (D) button during the network

▪

setup, you can access the Home menu even if the network setup is not completed yet.

If you want to display the Initial Setting screen again

▪

to make changes, select the Reset option. (See page

41)

If you use an HDMI cable to connect the player to an

▪

Anynet+(HDMI-CEC)-compliant Samsung TV and

1.) You have set the Anynet+(HDMI-CEC) feature to On in both the TV and the player and 2.) You have set the TV to a language supported by the player, the player will select that language as the preferred language automatically.

If you leave the player in the stop mode for more

▪

than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

05 Setup

d PBC(WPS)

Page 28

28 English

Setup

2D�3D

1 2 3

4 5 6

7 8 9

Accessing the Settings Menu

2 4

菜单

Button : Press to move to the Home menu.

Button : Return to the previous menu.

ENTER / DIRECTION Button : Move the cursor or select an item. Activate the currently selected item. Confirm a setting.

退出

Button : Press to exit the current menu.

Press the ◄► buttons to select Settings,

and then press the ENTER button.

Press the ▲▼ buttons to select the desired

submenu, and then press the ENTER button.

Press the ▲▼ buttons to select the desired

item, and then press the ENTER button.

Press the 退出 button to exit the menu.

5. NOTE

✎

When the player is connected to a network, select

▪

Smart Hub from the Home menu. Download the desired content from Samsung Apps. (See pages 61~63)

The access steps may differ depending on the menu

▪

you selected.

The OSD (On Screen Display) may change in this

▪

player after you upgrade the software version.

Settings menu

•

To access the Settings menu and sub-menus, follow these steps:

Press the 电源 button.

The Home Menu appears.

Home Menu

•

My Contents

Videos

Photos

Music

My Devices Internet Settings

Selects My Devices.

Selects My Contents.

Selects Internet.

Selects Settings.

Displays the buttons available.

d PBC(WPS)

Settings

Display

Audio

Network

System

Language

Security

General

Support

Above : The Settings menu showing the 3D

Settings sub-menu.

3D Settings

3D Blu-ray Playback Mode : Auto

Screen Size :

Move " Enter ' Return

HDMI Deep Color : Auto

inch

The following menu items are on the Settings Menu :

Display

•

Audio

•

Network

•

System

•

Language

•

Security

•

General

•

Support

•

The menu items are addressed in the order listed above on the following pages, starting with Display.

Page 29

English 29

05 Setup

Display

You can configure various display options such as the TV Aspect Ratio, Resolution, etc.

3D Settings

Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.

Settings

Display

Audio

Network

System

Language

Security

General

Support

3D Blu-ray Playback Mode

3D Blu-ray Discs are available in two formats: Bluray 3D and 3D only. You can choose to watch a Blu-ray 3D disc in 3D or 2D mode before playing the disc.

Auto : Automatically detect if a connected TV

• has 3D capability and play a Blu-ray 3D disc in 3D or 2D accordingly or a 3D only disc in 3D if the TV supports 3D. 3D only discs will not be played if your TV does not support 3D.

3D  3D : Play 3D only and Blu-ray 3D discs in

• 3D mode at all times.

3D  2D : Play Blu-ray 3D discs in 2D mode at

• all times. 3D only discs will not be played.

NOTE

✎

For some 3D discs, to stop a movie during 3D

▪

playback, press the STOP ( ) button once. The movie stops and the 3D mode option is de-activated. To change a 3D option selection when you are playing a 3D movie, press the STOP ( ) button once. The Blu-ray menu appears. Press the STOP ( ) button again, then select 3D Settings in the Blu-ray menu.

Depending on the content and the position of the

▪

picture on your TV screen, you may see vertical black bars on the left side, right side, or both sides.

3D Settings

3D Blu-ray Playback Mode : Auto

Screen Size :

Move " Enter ' Return

HDMI Deep Color : Auto

inch

Screen Size

Lets you enter the actual screen size of your TV so that the player can adjust the image according to the screen size and display an optimal 3D image. (For 3D displays bigger than 116 inches, simply setting it as 116 is also a safe choice.)

CAUTION

If you want to enjoy 3D content, connect a 3D device

▪

(3D compliant AV receiver or TV) to the player’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

The player outputs 3D signals only through HDMI

▪

cable connected to the HDMI OUT port.

As the video resolution in 3D play mode is fixed

▪

according to the resolution of the original 3D video, you can not change the resolution to your preference.

Some functions such as BD Wise, screen size

▪

adjustment, and resolution adjustment may not operate properly in 3D play mode.

You must use a high-speed HDMI cable for proper

▪

output of the 3D signal.

Stay at least three times the width of the screen from

▪

the TV when watching 3D images. For example, if you have a 46 inch screen, stay 138 inches (11.5 feet) from the screen.

Place the 3D video screen at eye level for the

best 3D picture.

When the player is connected to some 3D devices,

▪

the 3D effect may not function properly.

This player does not convert 2D content into 3D.

▪

“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks

▪

of the Blu-ray Disc Association.

Page 30

30 English

Setup

TV Aspect

Depending on the type of television you have, you may want to adjust the screen size setting.

16:9 Original : Select when you connect the

• player to a 16:9 TV screen. The player will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right.

16:9 Full : Select when you connect the player

• to a 16:9 TV screen. All content will fill the full screen. Content formatted in 4:3 will be stretched.

4:3 Letter Box : Select when you connect the

• player to a 4:3 TV screen. The player will display all content in its original aspect ratio. Content formatted in 16:9 will be displayed with black bars on the top and bottom.

4:3 Pan-Scan : Select when you connect the

• player to a 4:3 TV screen. 16:9 content will have the extreme left and right portions cut off.

NOTE

✎

Depending on the disc type, some aspect ratios may

▪

not be available.

If you select an aspect ratio and option which is

▪

different than the aspect ratio of your TV screen, then the picture might appear to be distorted.

If you select the 16:9 Original, your TV may display

▪

4:3 Pillarbox (black bars on sides of picture).

Smart Hub Screen Size

Set the Smart Hub Screen to the optimal size.

Size 1 : Smart Hub screen size will be smaller

• than default. You may see some black on sides of screen.

Size 2 : This is the default setting for Smart

• Hub. The player displays the normal Smart Hub screen size.

Size 3 : This will display a larger Smart Hub

• screen size. The image may be too large for your TV screen.

BD Wise (Samsung Players only)

BD Wise is Samsung’s latest inter-connectivity feature.

When you connect a Samsung player and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the player and TV, the player outputs video at the video resolution and frame rate of the Blu-ray Disc/DVDs.

Off : The output resolution stays fixed at the

• resolution you set previously in the Resolution menu, regardless of the resolution of the disc. See Resolution below.

On : The player outputs video at the original

• resolution and frame rate of the Blu-ray Disc/ DVDs.

NOTE

✎

When BD Wise is on, the Resolution setting

▪

automatically defaults to BD Wise and BD Wise appears in the Resolution menu.

If the player is connected to a device that does not

▪

support BD Wise, you can not use the BD Wise function.

For proper operation of BD Wise, set the BD Wise

▪

menu of both the player and the TV to On.

Resolution

Lets you set the output resolution of the Component and HDMI video signal to Auto, 1080p, 1080i, 720p, 576p/480p, or 576i/480i. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher the quality.

Auto : Automatically sets the output resolution

• to the connected TV’s maximum resolution.

BD Wise : Automatically sets the resolution to

• the resolution of the Blu-ray Disc/DVDs if you have connected the player via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On. See BD Wise above.)

1080p :

•

Outputs 1080 lines of progressive video.

1080i : Outputs 1080 lines of interlaced video. 720p : Outputs 720 lines of progressive video. 576p/480p : Outputs 576/480 lines of

progressive video. 576i/480i :

Outputs 576/480 lines of interlaced video.

Page 31

English 31

05 Setup

Resolution according to the output mode

Blu-ray Disc/E-contents/Digital Contents playback

•

HDMI / connected HDMI / not connected

Setup

BD Wise

1080p 1080p 1080p 576i/480i - - -

Movie Frame : Auto (24Fs) 1080p@24F 1080p@24F 480i - - -

1080i 1080i 1080i 576i/480i 576i/480i 576p/480p 576i/480i

720p 720p 720p 576i/480i 576i/480i 576p/480p 576i/480i

576p/480p 576p/480p 576p/480p 576i/480i 576i/480i 576p/480p 576i/480i

576i/480i - - - 576i/480i 576i/480i 576i/480i

DVD playback

•

Setup

BD Wise 576i/480i 576i/480i - -

1080p 1080p 576i/480i - -

1080i 1080i 576i/480i 576p/480p 576i/480i

720p 720p 576i/480i 576p/480p 576i/480i

576p/480p 576p/480p 576i/480i 576p/480p 576i/480i

576i/480i - - 576i/480i 576i/480i

Output

Auto

Output

Auto

HDMI Mode

Blu-ray Disc

Resolution of Blu-ray Disc

Max.

Resolution of

TV input

Max. Resolution of TV

E-contents/

Digital

contents

1080p 576i/480i - - -

Max.

Resolution of

TV input

HDMI / connected HDMI / not connected

HDMI Mode

input

Component/ VIDEO Mode

576i/480i - - -

Component/VIDEO Mode

576i/480i - -

Component Mode

Blu-ray Disc

Component Mode VIDEO Mode

E-contents/

Digital

contents

VIDEO Mode

Page 32

32 English

Setup

NOTE

✎

If the TV you connected to the player does not

▪

support Movie Frame or the resolution you selected, the message “If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.

If the screen stays blank after you have changed the

▪

resolution, remove all discs, and then press and hold the STOP ( ) button on the front of the player for more than 5 seconds. All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.

When the factory default settings are restored, all

▪

stored user BD data is deleted.

The Blu-ray Disc must have the 24 frame feature for

▪

the player to use the Movie Frame (24Fs) mode.

If both HDMI and Component jacks are connected

▪

and you are currently viewing Component output, the resolution is fixed to 576i/480i.

HDMI Color Format

Lets you set the colour space format for HDMI output to match the capabilities of the connected device (TV, monitor, etc).

Auto : Automatically sets the player to the

• optimum format supported by your device.

YCbCr (4:4:4) : If your TV supports the YCbCr

• colour space via HDMI, select this to output the normal YCbCr colour gamut.

RGB (Standard) : Select this to output the

• normal RGB colour gamut.

RGB (Enhanced) : If you have connected the

• player to a DVI display device such as a monitor, select this to output the enhanced RGB colour gamut.

Movie Frame (24Fs)

Setting the Movie Frame (24Fs) feature to Auto allows you to adjust the player’s HDMI output to 24 frames per second for improved picture quality. You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. You can select Movie Frame only when the player is in the HDMI 1080i or 1080p output resolution modes.

Auto : Movie Frame (24Fs) functions work.

• Off : Movie Frame (24Fs) functions are off.

•

Page 33

English 33

05 Setup

HDMI Deep Color

Lets you output video from the HDMI OUT jack with Deep Colour. Deep Colour provides more accurate colour reproduction with greater colour depth.

Auto : The player outputs video with Deep

• Colour to a connected TV which supports HDMI Deep Colour.

Off : The picture is output without Deep Colour.

•

Still Mode

Lets you set the type of picture the player displays when you pause DVD playback.

Auto : Automatically shows the best still picture

• depending on the content.

Frame : Select when pausing a scene with a

• little action.

Field : Select when pausing a scene with a lot

• of action.

Progressive Mode

Lets you improve picture quality when viewing DVDs.

Auto :

•

Select to have the player automatically select the best picture quality for the DVD you’re watching.

Video : Select for the best picture quality from concert or TV show DVDs.

Audio

Digital Output

You set the Digital Output to match the capabilities of the AV receiver you’ve connected to the player :

PCM : Choose if you have connected an HDMI

• supported AV receiver.

Bitstream (Unprocessed) : Select if you have

• connected an HDMI supported AV receiver with Dolby TrueHD and DTS-HD Master Audio decoding capabilities.

Bitstream (Re-encoded DTS) : Choose if you

• have connected an AV receiver using a Digital Optical input that can decode DTS.

Bitstream (Re-encoded Dolby D) : Select if

• you don’t have an HDMI supported AV receiver, but have an AV receiver with Dolby Digital decoding capabilities.

For more details, please refer to the digital output selection table. (See page 34)

Page 34

34 English

Setup

Digital Output Selection

Setup PCM

Connection

PCM Up to 7.1ch PCM 2ch PCM PCM 2ch DTS re-encoded

Dolby Digital Up to 7.1ch PCM 2ch Dolby Digital Dolby Digital DTS re-encoded

Dolby Digital

Audio Stream

on Blu-ray

Disc

Audio Stream

on DVD

Definition for

Blu-ray Disc

* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting are not applied. Output will be LPCM 2ch.

Plus

Dolby TrueHD Up to 7.1ch PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded

DTS Up to 6.1ch PCM 2ch DTS DTS DTS re-encoded

DTS-HD HRA Up to 7.1ch PCM 2ch DTS-HD HRA DTS DTS re-encoded

DTS-HD MA Up to 7.1ch PCM 2ch DTS-HD MA DTS DTS re-encoded

PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch

Dolby Digital Up to 5.1ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital

DTS Up to 6.1ch PCM 2ch DTS DTS DTS DTS

Any

HDMI

supported

AV receiver

Up to 7.1ch PCM 2ch

Decodes the main feature

audio and BONUSVIEW

audio stream together

into PCM audio and adds

Navigation Sound Effects.

Optical

Bitstream

(Unprocessed)

HDMI

supported

AV receiver

Dolby Digital

Plus

Outputs only the main feature audio stream so that your AV receiver can decode

the audio bitstream.

You will not hear

BONUSVIEW audio or

Navigation Sound Effects.

Optical

Dolby Digital DTS re-encoded

Bitstream

(Re-encoded

DTS)

HDMI supported

AV receiver or

Optical

Decodes the main feature audio and BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects, then

re-encodes the

PCM audio into DTS

bitstream.

Bitstream

(Re-encoded

Dolby D)

HDMI supported

AV receiver or

Optical

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Decodes the main

feature audio and

BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects, then

re-encodes the PCM

audio into Dolby

digital bitstream or

PCM.

Blu-ray Discs may include three audio streams :

Main Feature Audio : The audio soundtrack of the main feature.

BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.

Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may

sound. Navigation Sound Effects are different on each Blu-ray Disc.

Page 35

English 35

05 Setup

NOTE

✎

Be sure to select the correct Digital Output or you

▪

will hear no sound or just loud noise.

If the HDMI device (AV receiver, TV) is not compatible

▪

with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio and

▪

Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW audio

▪

and Navigation Sound Effects.

This Digital Output setup does not effect the analogue

▪

(L/R) audio or HDMI audio output to your TV. It effects the optical and HDMI audio output when your player is connected to an AV receiver.

If you play MPEG audio soundtracks, the audio signal

▪

outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).

PCM Downsampling

Lets you set 48kHz and 96kHz PCM downsampling on or off.

Off : Select when the AV receiver connected to

• the player is 96kHz compatible.

On : Select when the AV receiver connected

• to the player is not 96kHz compatible. 96kHz signals will be down converted to 48kHz.

NOTE

✎

Even when PCM Downsampling is set to Off, some

▪

discs will only output downsampled audio through the optical digital outputs.

HDMI

If your TV is not compatible with compressed

• multi-channel formats (Dolby Digital, DTS), the player may output PCM 2ch downmixed audio even though you selected Bitstream (either Reencoded or Unprocessed) in the setup menu.

If your TV is not compatible with PCM sampling

• rates over 48kHz, the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off.

Dynamic Range Control

You can listen at low volumes, but still hear dialog clearly. This is only active if your player detects a Dolby Digital signal.

Auto : The Dynamic Range Control will be set

• automatically based on the information provided by the Dolby TrueHD Soundtrack.

Off : You can enjoy the movie with the standard

• Dynamic Range.

On : When Movie soundtracks are played at low

• volume or through smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

Downmixing Mode

Lets you select how the player will downmix multichannel audio into fewer channels.

Normal Stereo : Downmixes the multi-channel

• audio into two channel stereo. Choose when connected to equipment that does not support virtual surround functions such as Dolby Pro Logic.

Surround Compatible : Downmixes multi-

• channel audio into surround compatible stereo. Choose when connected to equipment that supports virtual surround functions such as Dolby Pro Logic.

DTS Neo:6 Mode

You can enjoy multi-channel sound from an Audio CD (CD-DA).

Off : Outputs a 2-channel audio signal through

• the front speakers only.

Cinema : Select to play 2-channel movie sound

• over multi-channels.

Music : Select to play 2-channel music over

• multi-channels.

NOTE

✎

If you are using an HDMI supported AV receiver, this

▪

option is available when you set Digital Output setup as PCM.

Page 36

36 English

Setup

Network

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you are using a wired or wireless connection, we recommend using the Auto procedures. If you are using a wireless connection and your router has the capability, you can use WPS(PBC) or One Foot Connection.

If your IP address is static, you must use the manual set up procedure for both wired and wireless connections.

Network Settings

To begin setting up the network connection for your player, follow these steps:

In the Home menu, press the ◄► buttons to

select Settings, and then press the ENTER button.

Press the ▲▼ buttons to select Network, and

then press the ENTER button. Press the ▲▼ buttons to select Network

3. Settings, and then press the ENTER button.

Press the ▲▼ buttons to select Wired,

4. Wireless (General), WPS(PBC) or One Foot Connection, and then press the ENTER

button.

If you have a wired network, go to Wired

Network below. If you have a wireless network, go to Wireless Network on pages 37~39.

Wired Network

Setting Up a Wired Connection - Auto

Press the ▲▼ buttons to select Wired.

Settings

Display

Audio

Network

System

Language

Security

General

Support

Press the ENTER button.

The Network Status screen appears. The player connects to the network after the network connection is verified.

Setting Up a Wired Connection - Manual

If you have a static IP address or the Auto Setting does not work, you’ll need to set the Network Settings values manually.

To view your Network Settings values on most Windows computers, follow these steps:

Windows XP



Right click the Network icon on the bottom

right of the Windows desktop.

In the pop-up menu, click Status.

On the dialog that appears, click the Support

tab.

On the Support tab, click the Details button.

The Network settings are displayed.

Windows 7



Click the Network icon on the bottom right of

the Windows desktop.

In the pop-up menu, click Network and

Sharing Centre.

Network Settings

Select a network connection type.

Wired

Wireless (General)

Connect to the network using LAN cable. Please make

WPS(PBC)

sure that the LAN cable is connected.

One Foot

Connection

Move " Enter ' Return

Page 37

English 37

05 Setup

On the dialog that appears, click the Local Area Connection or Wireless Network Connection depending on your network connection.

On the Support tab, click the Details button. The Network settings are displayed.

NOTE

✎

Depending on your Windows version, the information

▪

may differ.

To enter the Network settings into your player, follow these steps:

Press the ▲▼ buttons to select Wired, and then press the ENTER button.

Press the ◄► buttons to select IP Settings, and then press the ENTER button.

On the Network Status screen, select Cancel, and then press Enter.

Settings

Display

Audio

IP Mode Manual

Network

System

Language

DNS Mode Manual

Security

General

Support

Press the ENTER button to select IP Mode.

Press the ▲▼ buttons to select Manual, and

IP Address

Subnet Mask

Gateway

DNS Server

IP Settings

0.0.0.0

Move " Enter ' Return

then press the ENTER button.

Press the ▼ button to go to the first entry field (IP Address).

Use the number buttons on your remote to enter numbers.

When done with each field, press the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back.

Enter the IP Address, Subnet Mask, and Gateway values.

Press the ▼ button to go to DNS Mode.

10.

Press the ▼ button to go to the first DNS

11.

entry field. Enter the numbers as above. Press the ENTER button to select OK.

12.

The Network Status screen appears. The player connects to the network after the network connection is verified.

Wireless Network

You can setup a wireless network three ways:

Wireless (General)

• Using WPS(PBC)

• One Foot Connection

•

Wireless (General) includes both Automatic and Manual setup procedures.

Setting Up the Wireless Network Connection

- Auto

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the Auto setup process.

Press the ▲▼ buttons to select Wireless

(General).

Settings

Display

Select a network connection type.

Audio

Network

Wired

System

Wireless

Language

(General)

Security

WPS(PBC)

General

One Foot

Connection

Support

Press the ENTER button.

When done, it displays a list of the available networks.

Network Settings

Set up wireless network by selecting your Wireless Router. You may need to enter security key depending on the setting of the Wireless Router.

Move " Enter ' Return

Page 38

38 English

Setup

Press the ▲▼ buttons to select the desired

network, and then press the ENTER button. The Security screen appears.

On the Security screen, enter your network’s

Pass Phrase. Enter numbers directly using your remote control. To select a letter, press the ▲▼◄► buttons to move the cursor, then press the ENTER button.

Settings

Display

Audio

Network

System

Language

Security

General

Support

NOTE

✎

You should be able to find the Pass Phrase on one of

▪

the set up screens you used to set up your router or modem.

When done, press the GREEN (B) button on

your remote, or press the ▲▼◄► buttons to move the cursor to Done, and then press the ENTER button. The Network Status screen appears. The player connects to the network after the network connection is verified.

Setting Up the Wireless Network Connection

- Manual

If the Auto Setting does not work, you need to enter the Network setting values manually.

To view the Network Settings values on most Windows computers, follow these steps:

Windows XP



Right click the Network icon on the bottom

right of the Windows desktop.

In the pop-up menu, click Status.

On the dialog that appears, click the Support

tab.

On the Support tab, click the Details button.

The Network settings are displayed.

Network Settings

Enter security key. 0 entered

a b c d e f 1 2 3

g h i j k l 4 5 6

m n o p q r 7 8 9

s t u v w x y z 0

a/A

Delete Space Done

Previous m Move " Enter ' Return

Windows 7



Click the Network icon on the bottom right of

the Windows desktop.

In the pop-up menu, click Network and

Sharing Centre.

On the dialog that appears, click the Local

Area Connection or Wireless Network Connection depending on your network connection.

On the Support tab, click the Details button.

The Network settings are displayed.

NOTE

✎

Depending on your Windows version, the information

▪

may differ.

To enter the Network settings into your player, follow these steps:

Follow Steps 1 through 4 in the ‘Setting Up

the Wireless Network Connection - Auto’ procedure.

When done, press the GREEN (B) button on

your remote, or press the ▲▼◄► buttons to move the cursor to Done, and then press the ENTER button. The Network Status screen appears.

Settings

Display

Audio

IP Mode Manual

Network

System

Language

DNS Mode Manual

Security

General

Support

On the Network Status screen, select Cancel,

IP Address

Subnet Mask

Gateway

DNS Server

IP Settings

0.0.0.0

Move " Enter ' Return

and then press Enter. Press the ◄► buttons to select IP Settings,

and then press the ENTER button. Press the ENTER button to select IP Mode.

5. Press the ▲▼ buttons to select Manual, and

then press the ENTER button.

Press the ▼ button to go to the first entry field

(IP Address).

Page 39

English 39

05 Setup

Use the number buttons to enter numbers.

When done with each field, press the ►

button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back.

Enter the IP Address, Subnet Mask, and

10. Gateway values.

Press the ▼ to go to DNS Mode.

11.

Press the ▼ button to go to the first DNS

12.

entry field. Enter the numbers as above. Press the OK button.

13.

The Network Status screen appears. The

14.

player connects to the network after the network connection is verified.

WPS(PBC)

The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function.

If your wireless router has a WPS(PBC) button, follow these steps:

Press the ▲▼ buttons to select WPS(PBC).

Settings

Display

Select a network connection type.

Audio

Network

Wired

System

Wireless

Language

(General)

Security

WPS(PBC)

General

One Foot

Connection

Support

Press the ENTER button.

2. Press the WPS(PBC) button on your router

within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network.

The Network Status screen appears. The

player connects to the network after the network connection is verified.

Network Settings

Connect to the Wireless Router easily by pressing the WPS(PBC) button. Choose this if your Wireless Router supports Push Button Conﬁguration(PBC).

Move " Enter ' Return

One Foot Connection

You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps:

Press the ▲▼ buttons to select One Foot

1. Connection.

Settings

Display

Select a network connection type.

Audio

Network

Wired

System

Wireless

Language

(General)

Security

WPS(PBC)

General

One Foot

Connection

Support

Press the ENTER button.

Place the Samsung Wireless Router within 25

Network Settings

Connect to wireless network automatically if your Wireless Router supports One Foot Connection. Select this connection type after placing the Wireless Router within 10 inches(25cm) of product.

Move " Enter ' Return

cm (10 inches) of your player to connect.

Wait until the connection is automatically

established.

Network Status

Check whether a connection to the network and the Internet have been established.

Settings

Display

Audio

Network

System

Internet is connected successfully.

Language

If you have a problem using any Internet services, contact your Internet service

Security

provider.

General

Support

KT_WLAN

Network Status

MAC Address XX:XX:XX:XX:XX:XX IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway 0.0.0.0 DNS Server 0.0.0.0

IP Settings Retry OKNetwork Settings

< Move " Enter ' Return

Page 40

40 English

Setup

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

Allow (All) : The Internet connection is allowed

• for all BD-LIVE contents.

Allow (Valid Only) : The Internet connection is

• allowed only for BD-LIVE contents containing a valid certificate.

Prohibit : No Internet connection is allowed for

• any BD-LIVE content.

NOTE

✎

What is a valid certificate?

▪

When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player.

The Internet connection may be restricted while you

▪

are using BD-LIVE contents.

System

Initial Settings

By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See pages 27~44)

Anynet+(HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung players that have the Anynet+ feature. To operate this function, connect this player to a Samsung TV with an HDMI cable. With Anynet+ on, you can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAY ( ) button on the TV’s remote control. For more information, please see the TV user manual.

Off : Anynet+ functions will not work.

• On : Anynet+ functions will work.

•

NOTE

✎

This function is not available if the HDMI cable does

▪

not support CEC.

If your Samsung TV has an Anynet+ logo, then it

▪

supports the Anynet+ function.

Depending on your TV, certain HDMI output

▪

resolutions may not work. Please refer to the user manual of your TV.

BD Data Management

Lets you manage the downloaded contents you accessed through a Blu-ray Disc that supports the BD-LIVE service and stored on an attached Flash memory device.

You can check the device’s information including the storage size, delete the BD data, or change the Flash memory device.

BD Data Management Screen Information :

Total Size : Total memory size of the device.

•

Available Size : Available memory in the device.

•

NOTE

✎

In the external memory mode, disc playback may

▪

be stopped if you disconnect the USB device in the middle of playback.

Only those USB devices formatted in FAT file

▪

system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support USB

2.0 protocol with 4 MB/sec or faster read/write speed.

The Resume Play function may not work after you

▪

format the storage device.

The total memory available to BD Data Management

▪

may differ, depending on the conditions.

Page 41

English 41

05 Setup

Time Zone

You can specify the time zone that is applicable to your area.

Settings

Display

Audio

Network

System

Language

Security

General

Support

Time Zone

GMT + 00:00

London, Lisbon, Casablanca

Change " Save ' Return

Security

This function works in conjunction with Blu-ray Disc/DVDs that have been assigned an age rating or numeric rating that indicates the maturity level of the content. These numbers help you control the types of Blu-ray Disc/DVDs that your family can watch.

Select an age rating you want to set for the BD Parental Rating and a rating level you want to set for the DVD Parental Rating. The player will only play Blu-ray Discs rated at or below the age rating and DVDs rated below the numeric rating unless the password is entered.

Larger numbers indicate more mature content.

DivX® Video On Demand

View DivX® VOD Registration Codes to purchase and play DivX® VOD contents.

Reset

All settings will revert to the default except for the network and Smart Hub settings.

Language

You can select the language you prefer for the Home menu, disc menu, etc.

On-Screen Menu : Select the language for the

• on-screen displays.

Disc Menu : Select the language for the disc

• menu displays.

Audio : Select the language for disc audio.

• Subtitle : Select the language for disc subtitles.

•

NOTE

✎

The selected language will only appear if it is

▪

supported on the disc.

BD Parental Rating

Prevent playback of Blu-ray Discs with specific age ratings unless a password is entered.

DVD Parental Rating

Prevent playback of DVDs with specific numerical ratings unless a password is entered.

Change Password

Change the 4-digit password used to access security functions.

If you forgot your password

Remove the disc.

1. Press and hold the STOP ( ) button on the

front panel for 5 seconds or more. All settings will revert to the factory settings.

NOTE

✎

When the factory default settings are restored, all

▪

the user stored BD data will be deleted.

Page 42

42 English

Setup

General

Front Display

Change the brightness of the front panel.

Auto : Dim during playback.

•

Dim : Dim the display window.

•

Bright : Brighten the display window.

•

Light Effect

You can adjust the light effect on the player.

Always On : Activate Light Effect at all times.

• It is recommended for continuous display for commercial or demonstration use.

Auto : Activate Light Effect when you turn the

• player on or off and when you insert or eject a disc. This is recommended for home use.

Off : Turn Light off.

•

Network Remote Control

The Network Remote Control function lets you control your Blu-ray Disc player from a remote device such as a smart phone through a wireless connection to your local area network.

To use the Network Remote Control function, follow these steps:

Select On in the Network Remote Control

menu.

Install the Samsung network remote control

application to control your player on your compatible portable device.

Make sure your portable device and your

player are connected to the same wireless router.

Start the application on your portable device.

The application should find your player and display it on a list.

Select the player.

If this is the first time you are using the

function, it will ask you to allow or deny remote control of the player. Select Allow.

Follow the instructions that came with the

application to control the player.

Support

Software Upgrade

The Software Upgrade menu allows you to upgrade the player’s software for performance improvements or additional services. You can upgrade in four ways:

By Internet

• By USB

• By Disc

• By Downloaded (File)

•

The four methods are explained below.

By Internet

To upgrade by Internet, follow these steps:

Select By Internet, and then press the

ENTER button. The Connecting to Server

message appears.

If there is a download available, the Download

pop-up appears with a progress bar and the download starts.

When the download is complete, the Upgrade

Query window appears with three choices: Upgrade Now, Upgrade Later, or Don’t Upgrade.

If you select Upgrade Now, the player

upgrades the software, turns off, and then turns on automatically.

If you do not make a selection in one minute

or select Upgrade Later, the player stores the new upgrade software. You can upgrade the software later using the By Downloaded function.

If you select Don’t Upgrade, the player

cancels the upgrade.

NOTE

✎

Your player must be connected to the Internet to use

▪

the By Internet function.

The upgrade is complete when the player turns off,

▪

and then turns on again by itself.

Never turn the player off or back on manually during

▪

the update process.

Page 43

English 43

05 Setup

Samsung Electronics shall take no legal responsibility

▪

for player malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

If you want to cancel the upgrade while the upgrade

▪

software is downloading, press the ENTER button.

By USB

To upgrade by USB, follow these steps:

Visit www.samsung.com/bluraysupport

Download the latest USB software upgrade

zip archive to your computer.

Unzip the zip archive to your computer. You

should have a single folder with the same name as the zip file.

Copy the folder to a USB flash drive.

No disc should be inserted in the product,

and then insert the USB flash drive into the USB port of the player.

In the player’s menu, go to Settings > Support

> Software Upgrade. Select By USB.

7. NOTE

✎

No disc should be inserted in the product when you

▪

upgrade the software using the USB Host jack.

When the software upgrade is done, check the

▪

software details in the software Upgrade menu.

Do not turn off the player during the software

▪

upgrade. It may cause the player to malfunction.

Software upgrades using the USB Host jack must be

▪

performed with a USB memory flash stick only.

By Disc

To upgrade by Disc, follow these steps:

Visit www.samsung.com/bluraysupport.

Download the latest disc software upgrade

zip archive to your computer.

Unzip the zip archive to your computer. You

should have a single folder with the same name as the zip file.

Write the folder onto a disc. We recommend

a CD-R or DVD-R.

Finalize the disc before you remove it from

your computer.

Insert the disc into player.

In the player’s menu, go to Settings > Support

> Software upgrade. Select By Disc.

8. NOTE

✎

When the system upgrade is done, check the

▪

software details in the software Upgrade menu.

Do not turn off the player during the Software

▪

Upgrade. It may cause the player malfunction.

By Downloaded

The By Downloaded option lets you upgrade using a file the player downloaded earlier but you decided not to install immediately or a file downloaded by the player in Standby Mode (See Download in Standby Mode below).

To upgrade By Downloaded, follow these steps:

If upgrade software has been downloaded,

you will see the software version number to the right of By Downloaded.

Select By Downloaded, and then press the

2. ENTER button.

The player displays a message asking if you

want to upgrade. Select Yes. The player begins the upgrade.

When the update is complete, the player turns

off automatically, and then turns on.

NOTE

✎

When the system upgrade is done, check the

▪

software details in the software Upgrade menu.

Do not turn off the player during the software

▪

Upgrade. It may cause the player to malfunction.

Download in Standby Mode

You can set the Download in Standby Mode function so that the player downloads new upgrade software when it is in Standby mode. In Standby mode, the player is off, but its Internet connection is active. This allows the player to download upgrade software automatically, when you are not using it.

Page 44

44 English

Setup

To set Download in Standby Mode, follow these steps:

Press the ▲▼ buttons to select Download in

1. Standby Mode, and then press the ENTER

button. Select On or Off.

Off : If you select Off, the player will notify

•

you with a pop up message when new upgrade software is available.

On : If you select On, the player will

•

automatically download new upgrade software when it is in Standby mode with the power off. If it downloads new upgrade software, the player will ask you if you want to install it when you turn the player on.

NOTE

✎

To use the Download in Standby Mode function, your

▪

player must be connected to the Internet.

Contact Samsung

Provides contact information for assistance with your player.

Page 45

English 45

Basic Functions

Playing a Video

Playback

Push a disc into the Blu-ray Disc player with

the disc’s label facing up.

Press the PLAY ( ) button.

Playback related buttons

PLAY ( ) Starts playback.

Stops playback.

If you press the button once : The

STOP ( )

PAUSE ( ) Pauses playback.

NOTE

✎

For some discs, pressing the STOP ( ) button

▪

once may not memorize the stop position.

Video files with high bit rates of 20Mbps or more

▪

strain the player’s capabilities and may stop playing during playback.

•

stop position is memorized. If you press the button twice : The

•

stop position is not memorized.

Disc Structure

The content of discs are usually divided as shown below.

Blu-ray Disc, DVD-VIDEO

•

title 1 title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

Audio CD (CD-DA)

•

track 1 track 2 track 3 track 4 track 5

MP3, WMA, DivX, MKV and MP4

•

folder (group) 1 folder (group) 2

file 1 file 2 file 1 file 2 file 3

Using the Disc Menu/Title Menu/

Popup Menu

Using the Disc Menu

During playback, press the

button on the remote control.

Press the ▲▼◄► buttons to make a

selection, and then press the ENTER button.

NOTE

✎

Depending on the disc, the menu items may differ

▪

and this menu may not be available.

碟片菜单

06 Basic Functions

Page 46

46 English

Basic Functions

Using the Title Menu

During playback, press the

button on the remote control.

Press the ▲▼◄► buttons to make

the desired selection, then press the

ENTER button. NOTE

✎

Depending on the disc, the menu items may differ

▪

and this menu may not be available.

标题菜单

Playing the Title List

During playback, press the

标题菜单

Press the ▲▼ buttons to select an

entry you want to play from the Title List, and then press the ENTER button.

NOTE

✎

If your disc has a playlist, press the GREEN (B)

▪

button to go to the playlist.

button.

碟片菜单

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

Searching for a Desired Scene

hzZyx

During playback, press the SEARCH ( )

• button.

Each time you press the SEARCH ( button, the playback speed will change as follows

BD-ROM,

BD-RE/-R,

DVD-RW/-R,

DVD+RW/+R,

DVD-VIDEO

DivX, MKV, MP4

To return to normal speed playback, press the

•

PLAY ( ) button.

NOTE

✎

The player does not play sound in search mode.

▪

) )

( (

)

(



)

2  ) 3 

)

5  ) 6  ) 7

(

2  ( 3 

(

5  ( 6  ( 7

)

2  ) 3

(

2  ( 3

)

Using the Popup Menu

During playback, press the

button on the remote control. Press the ▲▼◄► buttons or ENTER

button to select the desired menu.

NOTE

✎

Depending on the disc, the menu items may differ

▪

and this menu may not be available.

弹出菜单

Skipping Chapters

hzZyx

During playback, press the SKIP ( )

• button.

If you press the SKIP ( ) button, the disc moves to the next chapter.

If you press the SKIP ( ) button, the disc moves to the beginning of the chapter. One more press makes the disc move to the beginning of the previous chapter.

Page 47

English 47

06 Basic Functions

Repeat Playback

Slow Motion Play/Step Motion Play

Repeat the Title or Chapter

hzZy

Repeat the disc title or chapter. Depending on the disc, the Repeat function may

not be available.

During playback, press the 重复

button on the remote control.

Press the ▲▼ buttons to select Chapter or

2. Title, then press the ENTER button.

To return to normal play, press the 重复

button again. Press the ▲▼ buttons to select Off, the press

4. the ENTER button.

Repeat the Section

hzZy

During playback, press the 重复

button on the remote control.

Press the ▲▼ buttons to select Repeat A-B.

2. Press the ENTER button at the point where

you want repeat play to start (A). Press the ENTER button at the point where

you want repeat play to stop (B).

To return to normal play, press the 重复

button again. Press the ENTER button.

6. NOTE

✎

If you set point (B) before 5 seconds has lapsed, the

▪

prohibition message will appear.

Depending on the disc, the menu items may differ

▪

and this menu may not be available.

Slow Motion Play

hzZyx

In pause mode, press the SEARCH ( )

• button.

Each time you press the SEARCH ( ) button, the playback speed will change as follows:

1/8 * 1/4 * 1/2

To return to normal speed playback, press the

•

PLAY ( ) button.

NOTE

✎

The player does not play sound in Slow mode.

▪

Step Motion Play

hzZyx

In pause mode, press the PAUSE ( ) button.

• Each time you press the PAUSE ( ) button, a

new frame appears. To return to normal speed playback, press the

•

PLAY ( ) button.

NOTE

✎

The player does not play sound in Step mode.

▪

Page 48

48 English

Basic Functions

Using the 工具 button

During playback, you can operate the disc menu by pressing the 工具 button.

Tools Menu Screen

•

Tools

Title Search 1/2 Chapter Search : 1/20 Time Search : 00:00:13/01:34:37 Full Screen : Original Picture Settings : Normal Audio : 1/1 JPN 2CH Subtitle : 0/2 Off Angle : 1/1 BONUSVIEW Video : Off BONUSVIEW Audio : 0/1 Off

Change

Enter ' Return

NOTE

✎

Depending on the disc, the Tools menu may differ.

▪

Moving to a Desired Scene Directly

hzZy

During playback, press the 工具 button.

1. Press the ▲▼ buttons to select Title Search,

2. Chapter Search, or Time Search.

Press the ◄► or number button to select

desired Title, Chapter or Time, then press the

ENTER button.

Changing to Full Screen

During playback, press the 工具 button.

1. Press the ▲▼ buttons to select Full Screen.

Press the ◄► buttons to select the desired

mode.

NOTE

✎

This function is available when the TV aspect ratio is

▪

16:9 full. (See page 30)

Selecting the Picture Settings

hzZy

This function enables you to adjust video quality when the player is connected to a TV.

During playback, press the 工具 button.

1. Press the ▲▼ buttons to select Picture

2. Settings, and then press the ENTER button.

Press the ◄► buttons to select the desired

3. Picture Settings, and then press the ENTER

button.

Dynamic : Choose this setting to increase

•

Sharpness. Normal : Choose this setting for most

•

viewing applications. Movie : This is the best setting for watching

•

movies. User : Lets you adjust the sharpness and

•

noise reduction function respectively.

NOTE

✎

When you use BD wise function, this menu will not

▪

appear.

Selecting the Audio Language

hzZx

You can also operate this function by pressing the 声道 button on the remote control.

During playback, press the 工具 button.

1. Press the ▲▼ buttons to select Audio.

Press the ◄► buttons to select the desired

audio language.

NOTE

✎

The ◄► indicator will not appear on the screen

▪

if the BONUSVIEW section does not contain any BONUSVIEW audio settings.

Page 49

English 49

06 Basic Functions

Information about the main feature/BONUSVIEW

▪

mode will also appear if the Blu-ray Disc has a BONUSVIEW section. Press the ◄► button to switch between main feature and BONUSVIEW audio modes.

The languages available through the Audio Language

▪

function depend on the languages that are encoded on the disc. This function or certain languages may not be available.

A Blu-ray Disc can contain up to 32 audio languages

▪

and a DVD up to 8.

Some Blu-ray Discs may allow you to select either

▪

the multi-channel LPCM or Dolby digital audio soundtrack in English.

If you press the 声道 button on the remote control,

▪

Audio bar appears. Press the 返回 button to remove the Audio bar.

Selecting the Subtitle Language

This function changes both the primary and

▪

secondary subtitles at the same time.

The total numbers of primary and secondary

▪

subtitles are displayed respectively.

If you press the 字幕 button on the remote control,

▪

the subtitle bar appears. Press the 返回 button to remove the subtitle bar.

Changing the Camera Angle

When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE function.

During playback, press the 工具 button.

1. Press the ▲▼ buttons to select Angle.

Press the ◄► buttons to select the desired

Angle.

hZx

You can also operate this function by pressing the 字幕 button on the remote control.

During playback, press the 工具 button.

1. Press the ▲▼ buttons to select Subtitle.

Press the ◄► buttons to select the desired

subtitle language.

NOTE

✎

Depending on the Blu-ray Disc / DVD, you may be

▪

able to change the desired subtitle in the Disc Menu.

碟片菜单

Press the

This function depends on the selection of subtitles

▪

that are encoded on the disc and may not be available on all Blu-ray Discs/DVDs.

A Blu-ray Disc can contain up to 255 subtitle

▪

languages and a DVD up to 32.

Information about the main feature/BONUSVIEW

▪

mode will also appear if the Blu-ray Disc has a BONUSVIEW section.

button.

Setting BONUSVIEW

The BONUSVIEW feature allows you to view additional content (such as commentaries) in a small screen window while the movie is playing. This function is only available if the disc has the Bonusview feature.

During playback, press the 工具 button.

1. Press the ▲▼ buttons to select BONUSVIEW

2. Video or BONUSVIEW Audio.

Press the ◄► buttons to select the desired

Bonusview.

NOTE

✎

If you switch from BONUSVIEW Video, BONUSVIEW

▪

Audio will change automatically in accordance with BONUSVIEW Video.

Page 50

50 English

Basic Functions

2D�3D

1 2 3

4 5 6

7 8 9

2D�3D

1 2 3

4 5 6

7 8 9

Listening to Music

Buttons on the Remote Control used for Music Playback

SEARCH buttons : Fast Play.

(Audio CD (CD-DA) only)

PAUSE button : Pauses playback.

PLAY button : Plays the currently selected track.

▲▼ buttons : Select a track in the Music List or

Playlist.

YELLOW (C) button : Displays check box in the

music list.

ENTER button : Plays the selected track.

STOP button : Stops a track.

2 3

SKIP button : During playback, moves to the next page in the Music List or moves to the next track in

the Playlist.

SKIP button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. If you press this button after three seconds of

playback in the Playlist, the current track is replayed from the beginning. But, if you press this button less than three seconds after playback starts in the Playlist, the previous track is played.

NUMBER buttons : During the Playlist playback, press the desired track number. The selected track

is played.

Playing an Audio CD (CD-DA)/MP3

Insert an Audio CD (CD-DA) or an MP3 Disc.

For an Audio CD (CD-DA), the first track

• plays automatically.

For an MP3 disc, press the ▲▼ buttons

• to select Music, then press the ENTER button.

Audio CD (CD-DA)/MP3 Screen Elements

1/13

Music

00:13 / 00:43

Audio CD

Displays the music information.

Displays the playlist.

TRACK 001

00:43

TRACK 002

03:56

TRACK 003

04:41

TRACK 004

04:02

Enter < Page / Tools ' Return

Page 51

English 51

06 Basic Functions

Display the current track/total tracks.

Displays buttons available.

Shows the current play time/total play time.

Displays the current playback status.

Displays the repeated playback status.

Press the ▲▼ buttons to select the track

you want to play, and then press the ENTER button.

Repeat an Audio CD (CD-DA)/MP3

During the Playlist playback, press the

工具

button.

Press the ▲▼ buttons to select

2. Repeat Mode, and then press the ◄►

buttons to select the desired repeat mode. Press the ▲▼ buttons to select Shuffle

3. Mode, and then press the ◄► buttons to

select On or Off. Press the ENTER button.

Off

(

) One Song The current song is repeated.

(

) All All songs are repeated.

Songs are played in the order in which they were recorded.

The random option plays songs in

( )

Shuffle Mode

random order. To operate this function, please set the shuffle mode to On.

Playlist

Insert an Audio CD (CD-DA) or an MP3 Disc.

For an Audio CD (CD-DA), the first track

•

plays automatically.

For an MP3 disc, press the ▲▼ buttons

•

to select Music, then press the ENTER button.

To move to the Music List, press the STOP

( ) or 返回 button. The Music List screen appears.

Press the YELLOW (C) button.

Press the ▲▼◄► buttons to move to a

desired track, and then press the ENTER button. A check appears on the track. Repeat this procedure to select additional tracks.

Audio CD | Music

TRACK 001

00:43

TRACK 003

04:41

TRACK 005

03:43

TRACK 007

04:06



Close Edit Mode

To remove a track from the list, move to the

Selected Items : 3

TRACK 002

03:56

TRACK 004

04:02

TRACK 006

03:40

TRACK 008

03:52

( )

Page / Tools " Select ' Return

track, and then press the ENTER button again. The check on the track is cancelled.

When done, press the 工具 button.

6. Press the ▲▼ buttons to select Play

7. Selected, and then press the ENTER button.

The tracks you selected play automatically.

Music

TRACK 001

00:13 / 00:43

Audio CD

To go to the Music List, press the 返回

TRACK 001

00:43

TRACK 002

03:56

TRACK 003

04:41

Enter / Tools ' Return

button.

NOTE

✎

You can create a playlist with up to 99 tracks on

▪

Audio CDs (CD-DA).

1/2 Page

1/3

Page 52

52 English

Basic Functions

Playing back Pictures

Playing a JPEG files

Insert a JPEG disc.

1. Press the ▲▼ buttons to select Photos, and

then press the ENTER button.

Press the ▲▼◄► buttons to select the folder

you want to play, and then press the ENTER button.

Press the ▲▼◄► buttons to select the photo

you want to play, and then press the ENTER button.

NOTE

✎

You can’t enlarge the subtitle and PG graphic in the

▪

full screen mode.

Using the

You can use various function by pressing the 工具 button.

工具

button

Start Slide Show Background Music : Off Background Music Setting Zoom Rotate Information

Tools

Enter ' Return

Zoom : Select to enlarge the current picture.

• (Enlarged up to 4 times)

Rotate : Select to rotate the picture. (This will

• rotate the picture either clockwise or counter clockwise.)

Information : Shows the picture information

• including the name and size, etc.

NOTE

✎

To enable the background music function, the photo

▪

file must be in the same storage media as the music file. However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo, and the encoding method.

Using the Slide Show function

Press the 工具 button.

Press the ▲▼ buttons to select Start Slide

Show, and then press the ENTER button.

The Slide Show starts.

To pause the slide show, press the 工具

button again.

Tools

Pause Slide Show Slide Show Speed : Normal Slide Show Effect : Blind Background Music : Off Background Music Setting Zoom Rotate Information

Enter ' Return

Start Slide Show : Select to start the slide

• show.

Background Music : Select to listen to music

• while viewing a picture.

Background Music Setting : Select to set the

• background music setting.

Press the ▲▼ buttons to select Pause Slide

4. Show, and then press the ENTER button.

You can also set the slide show speed and

effect using the same method.

Page 53

English 53

06 Basic Functions

Playing back a USB Storage Device

You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc) located from a USB storage device.

Move to the Home menu.

My Contents

Videos

Photos

Music

My Devices Internet Settings

d PBC(WPS)

In Stop mode, connect the USB storage

device to the USB port on the front panel of the player.

My Contents

Videos

Connected Device

Photos

Music

123

NOTE

✎

You must remove the USB storage device safely

▪

(by performing the “Safely Remove USB” function) in order to prevent a possible damage to the USB memory. Press the 菜单 button to move to the Home menu, select the YELLOW (C) button, and then press the ENTER button.

If you insert a disc when playing a USB storage

▪

device, the device mode changes to “DVD or CD” automatically.

My Devices Internet Settings

Press the ENTER button.

Press the ▲▼◄► buttons to select the

Enter ' Return



Safely Remove USB d PBC(WPS)

desired Videos, Music, or Photos, and then press the ENTER button.

For playing back Video, Music or Photo files,

see pages 45~52.

Page 54

54 English

Network Services

You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the player to your network.

Read the following instructions before using any network service.

Connect the player to the network.

(See pages 25~26)

Configure the network settings.

(See pages 36~40)

Using Smart Hub

Using Smart Hub, you can stream movies, videos, and music from the Internet, access various for pay or free-of-charge applications and view them on your TV. Application content includes news, sports, weather forecasts, stock market quotes, maps, photos, and games.

You can also start this function by pressing the remote control.

智能枢纽

button on the

Starting Smart Hub for the First Time

To start Smart Hub for the first time, follow these steps :

Go to the Home menu.

The Smart Hub screen appears.

In a few cases, the Country screen appears immediately after.

If the Country screen has appeared, press

the ▲▼ buttons to select your country, then press the ENTER button.

NOTE

✎

Certain applications are available only in certain

▪

countries.

The Terms of Service Agreement screen

appears. If you want to agree, press the ◄► buttons to select Agree, then press the ENTER button.

NOTE

✎

Screens can take a few seconds to appear.

▪

The Service Update screen appears and

installs a number of services and applications. When done, it closes. The applications and services downloaded are displayed on the Smart Hub screen. This may take some time.

NOTE

✎

Smart Hub may close momentarily during the

▪

installation process.

A number of screens may appear after installation.

▪

You can press the ENTER button to close them or let them close on their own.

To start an application, press the ▲▼◄►

buttons to highlight a widget, then press the ENTER button.

My Contents

Videos

Photos

Music

My Devices Internet Settings

d PBC(WPS)

Press the ◄► buttons to select Internet, and

2. then press the ENTER button.

Page 55

English 55

07 Network Services

Smart Hub at a Glance

xxxxxxxx

Contents 1

xxxxxxxx

Contents 6

xxxxxxxx

Contents 5

xxxxxxxx

Contents 4

xxxxxxxx

Contents 3

xxxxxxxx

Contents 2

xxxxxxxx

Contents 7

xxxxxxxx

Contents 8

xxxxxxxx

Contents 9

xxxxxxxx

Contents 10

xxxxxxxx

Contents 11

xxxxxxxx

Contents 12

xxxxxxxx

Contents 1

xxxxxxxx

Contents 2

xxxxxxxx

Contents 3

xxxxxxxx

Contents 4

xxxxxxxx

Contents 5

Contents 1 Contents 2 Contents 3 Contents 4

1 2 3 5

Your Video

Recommended

Samsung Apps

7 6

Commercial : Displays the Smart Hub Guide, an introduction to the player, and new application

introductions.

Your Video : Provides recommendations for videos based on your tastes.

Lets you see movie recommendations based on

•

your previous preferences. Lets you select a movie, displays a list of VOD

•

(Video on Demand) providers that have the movie, and then lets you choose a provider for streaming. (Streaming is unavailable in some areas.)

For instructions to use Your Video, please visit

•

www.samsung.com.

Search : Provides an integrated search of your video providers and connected AllShare devices.

Usable while using Smart Hub (except when you

•

are watching a Blu-ray Disc).

For easy access, use the 搜索 button on the

•

remote control. For instructions to use search function, please

•

visit www.samsung.com.

Samsung Apps : You can download various for pay

or free-of-charge application services.

Recommended : Displays recommended contents

managed by Samsung.

Navigation Help : Displays the remote control buttons you can use to navigate in Smart Hub.

RED (A) : To log in to Smart Hub.

•

GREEN (B) : To sort the applications.

•

YELLOW (C) : To edit the applications.

•

BLUE (D) : To change the settings of Smart Hub.

•

My Applications : Displays your personal gallery of applications which you can add to, modify, and

delete.

NOTE

✎

Samsung Electronics takes no legal responsibility for

▪

any interruption of the Smart Hub service caused by the service provider for any reason.

The Smart Hub service downloads and processes

▪

data via the Internet so that you can enjoy the Internet contents on your TV screen. If the Internet connection is unstable, the service may be delayed or interrupted. Furthermore, the player may turn off automatically in response to conditions on the Internet. If this occurs, check the Internet connection and try again.

Application services may be provided in English only

▪

and the contents available may vary, depending on your area.

For more information about a Smart Hub service,

▪

visit the web site of the applicable service provider.

The services provided are subject to change by the

▪

Smart Hub service provider without notice.

The Smart Hub service contents may differ

▪

depending on the player’s firmware version.

Page 56

56 English

Network Services

xxxxxxxx

Contents 1

xxxxxxxx

Contents 6

xxxxxxxx

Contents 5

xxxxxxxx

Contents 4

xxxxxxxx

Contents 3

xxxxxxxx

Contents 2

xxxxxxxx

Contents 7

xxxxxxxx

Contents 8

xxxxxxxx

Contents 9

xxxxxxxx

Contents 10

xxxxxxxx

Contents 11

xxxxxxxx

Contents 12

xxxxxxxx

Contents 1

xxxxxxxx

Contents 2

xxxxxxxx

Contents 3

xxxxxxxx

Contents 4

xxxxxxxx

Contents 5

Contents 1 Contents 2 Contents 3 Contents 4

Using the Keypad

Through your remote, you can use the On-Screen Keypad to enter letters, numbers, and symbols.

1 2 3

. , –

abc def

4 5 6

ghi jkl mno

7 8 9

pqrs tuv wxyz

2 6

Shift Delete

ab Ab AB 1 

Input Method / Language: English

4 5

The current keypad.

Use to enter letters, numbers, and symbols.

Press the 字幕 button on the remote control to shift the input mode.

: ab, Ab, AB, numbers or icons.

Displays the current input mode.

Press the GREEN (B) button on the remote control

to change the input method. (T9 or ABC)

Press the 工具 button on the remote control to

change the language.

Press the 声道 button on the remote control to

delete a character.

Entering Text, Numbers and Symbols

To enter text, press the number button on the remote that corresponds to the letter you want to enter. Press the button rapidly to enter a letter that is not the first letter listed on the On-Screen keypad button. For example, if you want to enter the letter b, press the 2 button on your remote rapidly twice. To enter the first letter listed on a button, press, release, and then wait.

To move within the text, use the Arrow buttons. To delete text, move the cursor to the right of the character you want to delete, and then press the

声道

button. To change case or enter numbers or

punctuation, press the 字幕 button.

Creating an Account

To establish your own, exclusive, configuration of Smart Hub, create your own Smart TV Account.

To create an account, follow these steps:

Press the RED (A) button on your remote

control. The Create Account screen appears.

Your Video

Recommended

Smart TV ID

Password

Press the ▲▼◄► buttons to select Create

Press [Enter]

Remember my Smart TV ID and password



Create Account Forgot Password

Account, and then press the ENTER button. On the next screen, select Smart TV ID, and

then press the ENTER button. An entry screen and keypad appear.

Use the keypad to enter your e-mail address. This will serve as your ID.

NOTE

✎

The keypad works like the keypad on a cell phone.

▪

When done, press the ENTER button to

select OK, and then press the ENTER button again. The Create Account screen reappears.

Select Password, and then press the ENTER button. An entry screen and a keypad appear.

Use the keypad to enter a password.

The password can be any combination of letters, numbers, and symbols.

NOTE

✎

Press the RED (A) button on your remote to show or

▪

hide the password as you enter it.

Samsung Apps



Page 57

English 57

07 Network Services

When done, press the ENTER button to select OK, and then press the ENTER button again. The Create Account screen reappears.

Select Confirm password, and then press the ENTER button.

10.

Repeat Steps 7 and 8.

11.

When the Create Account screen re-appears, select Create Account, and then press the ENTER button. The Confirmation window appears.

12.

Select OK, and then press the ENTER button. The Continue to Register Service window appears.

13.

Select Go Register, and then press the ENTER button.

14.

The Register Service Account Window appears.

•

If you have existing accounts with any of the listed providers, you can associate the provider account and the provider account password with your Smart TV Account. Registration makes it easier to access the providers web site. For registration instructions, go to Step 2 in Account Management under the Settings Menu.

•

If you don’t have existing provider accounts or do not want to register existing accounts at this time, select OK, and then press the ENTER button. You can also let the window close on its own in about a minute.

NOTE

✎

You must use an e-mail address as an ID.

▪

You can register up to 10 User Accounts.

▪

You do not need an account to use Smart Hub.

▪

Account Log In

To log in to your Smart TV Account, follow these steps:

With the Smart Hub main screen displayed on your TV, press the RED (A) button on your remote. The Create Account screen appears.

Select the Down Arrow next to the Smart TV ID field, and then press the ENTER button.

Select your ID from the list that appears, and

then press the ENTER button. The Create Account screen re-appears.

Select Password, and then press the ENTER

button. An entry screen and a keypad appears.

Using the keypad and your remote, enter your

password. When done, press the ENTER button, select OK, and then press the ENTER button again.

NOTE

✎

If you want Smart Hub to enter your password

▪

automatically, select Remember my Smart TV ID and password after you have entered your password, and then press the ENTER button. A check appears. Smart Hub will now enter your password automatically when you select or enter your ID.

The Settings Menu - BLUE (D)

The Settings Menu Screen gives you access to account management, reset, and properties functions.

To access the Settings Menu, and then select a menu item, follow these steps:

Press the BLUE (D) button on your remote.

Press the ▲▼ to select a menu item, and

then press the ENTER button.

The functions on the Settings Menu screen are described below.

NOTE

✎

The Service Manager item listed in the Settings

▪

Menu is not available for Blu-ray Disc players.

Account Management

The Account Management Menu contains functions that let you register your service provider accounts, change your Smart Hub password, and delete or deactivate your Smart TV Account.

Page 58

58 English

Network Services

If you have existing accounts with any of the providers listed by the Register Service Account function, you can associate the provider account and the provider account password with your Smart TV Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or password.

To use the Register Service Account function, follow these steps:

In the Account Management menu, select

Press the ▲▼ buttons to select a Service

Provider you want to associate with your Smart TV Account, and then press the

ENTER button. NOTE

✎

If you have a Samsung apps account and you want

▪

to use the Samsung Apps function in Smart Hub, you must register your Samsung Apps account here. See pages 61~63 for more information.

Press the ▲▼ buttons to select Register, and

then using your remote and the on-screen Keypad, enter your site ID and password. When done, press the ENTER button.

NOTE

✎

This is the ID and password you normally use to

▪

access your account on this site.

If you have entered the ID and password

correctly, the Registered Successfully message appears.

If you pressed OK, repeat Steps 2 through 4

to associate another Service Provider.

When you are done, press the 返回 button.

Change Password

The Change Password function lets you change your Smart Hub password. To change the password, follow these steps:

Select Change Password, and then press

the ENTER button.

Enter your current password. The next screen

appears.

On the next screen, enter a new password on

the first line. Enter it again on the second line to confirm.

The Changing Password Complete message

screen appears. Press the ENTER button or wait for the screen to close - about 5 seconds.

Remove Service Accounts

The Remove Service Accounts function cancels all your current registered Service Accounts that you registered on the Register Service Account screen.

Deactivate Account

The Deactivate Account function deactivates your Smart TV Account and deletes it and all your account settings entirely from Smart Hub.

Reset

The Reset function initializes all downloaded widgets, erases all user accounts and settings from the player, and resets all Smart Hub settings to the factory default settings. It then restarts Smart Hub as if it were starting for the first time. Your account, however, remains on the Smart Hub server. To log into your account, enter your ID and password on the Create Account screen.

To use the Reset function, follow these steps:

In the Settings menu, select Reset, and then

press the ENTER button. The Reset screen appears.

Enter the your Security password. This is the

password you entered if you set up a BD or DVD Parental rating (See page 41). If you did not, enter 0000.

Page 59

English 59

07 Network Services

After a few moments, Smart Hub automatically

resets. The screen may go black, then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure.

To complete the re-initialization, go to Step 4

in Starting Smart Hub for the First Time. (See page 54)

NOTE

✎

If you forgot your password, press the STOP ( )

▪

button on the front panel of the player for more than 5 seconds with no disc inserted.

Properties

The Properties menu item lists three functions that display information about Smart Hub :

Detail

Lists information about Smart Hub including version number, the number of services installed, memory usage, and the unique product ID.

Check the speed of your internet connection

Runs a test which shows how fast your connection to the Samsung's server is in Mbps (Megabits per second). Speeds lower than 1.5 Mbps can limit your enjoyment of Smart Hub.

Displays the Terms of Service Agreement.

The Edit Mode Menu - YELLOW (C)

The functions in the Edit Mode menu let you manipulate the widgets in the My Applications section of the Smart Hub screen. Using these functions, you can lock and unlock access to some widgets, New Folder and move widgets to them, rename folders, delete widgets, and change the position of widgets on the screen.

To access the Edit Mode Menu, and then select a menu item, follow these steps:

Press the YELLOW (C) button on your

remote. The Edit Mode menu bar appears on the bottom of the screen.

Press the ▲▼◄► to select a menu item, and

then press the ENTER button.

The functions in the Edit Mode Menu bar are described below.

NOTE

✎

Some menu items may not appear on the screen.

▪

To see these items, press the ◄► to move to the screen edge, and then press one more time to reveal the items.

You can close the bar by highlighting the X on the

▪

bottom right side, and then pressing the ENTER button.

Move

The Move function lets you change the screen position of a widget. To use the Move function, follow these steps:

Press the YELLOW (C) button on your

remote. Select a widget, and then press the ENTER

button. A check appears above the widget. Press the ▲▼◄► to select Move, and then

press the ENTER button. A position change icon appears above the widget.

Press the ▲▼◄► to move the icon. Press

the ENTER button when the icon is in the position of your choice. The widget moves to its new location.

Move to Folder

The Move to Folder function lets you move a widget to a folder. To use the Move to Folder function, follow these steps:

Press the YELLOW (C) button on your

remote. Select a widget, and then press the ENTER

button. If you already create a folder, the widget can be moved.

Press the ▲▼◄► to select Move to Folder,

and then press the ENTER button. The Move to Folder window opens.

Press the ▲▼◄► to select a folder, and

then press the ENTER button. The Moved to Folder message appears, and then closes. The widget has been moved to the folder.

Page 60

60 English

Network Services

To Access Widgets in a Folder

Close the Edit Mode menu.

In My Applications, press the ▲▼◄► to

select a folder, and then press the ENTER button. The folder opens.

Select a widget, and then press the ENTER

button. The widget’s application or service starts.

To Edit Items in a Folder

Select a folder, and then press the ENTER button. The folder opens.

Press the YELLOW (C) button on your remote. The Edit buttons appear at the bottom of the screen.

These buttons work the same as the Edit Mode menu buttons on the main screen. For example, to move a widget back to the My Applications main screen:

Select the widget.

Select Move to Folder, and then press the

2. ENTER button. The Move to Folder window

appears.

Select My Applications, and then press the

3. ENTER button. The Move to Folder window

closes and the widget returns to the main My Applications screen.

New Folder

The New Folder function lets you create and name new folders. Once you have created a folder, you can move widgets into it. To use the New Folder function, follow these steps:

Press the YELLOW (C) button on your

remote.

Press the ▲▼◄► to move the cursor to New

Folder, and then press the ENTER button. The New Folder window and a keypad appear.

Use the keypad to enter the name of the

folder, and then press the ENTER button. The New Folder screen closes and the New Folder appears on the Smart Hub screen.

Rename Folder

The Rename Folder function lets you rename folders. To use the Rename Folder function, follow these steps:

Press the YELLOW (C) button on your

remote.

Press the ▲▼◄► to select a folder, and then

press the ENTER button.

Press the ▲▼◄► to select Rename a Folder,

and then press the ENTER button. The Folder Rename window and a keypad appears.

Use the keypad to enter a new name, and

then press the ENTER button. The Rename window closes and the new name appears below the folder.

Lock

The Lock function lets you lock some widgets in My Applications so they can not be opened without entering the Parental Security Code.

To use the Lock function, follow these steps:

Press the YELLOW (C) button on your

remote.

Press the ▲▼◄► to select a widget, and

then press the ENTER button. If the widget can be locked, the Lock menu item is enabled.

Press the ▲▼◄► to select Lock, and then

press the ENTER button. The Lock Service window appears.

Enter your Parental Security Code (See

page 41). If you have not created a Parental Security Code, enter 0000.

Press the ENTER button. The Lock Service

window appears confirming the lock, and then closes. A lock symbol appears next to the widget.

Page 61

English 61

07 Network Services

Unlock

Press the YELLOW (C) button on your

remote.

Press the ▲▼◄► to select a locked widget,

and then press the ENTER button.

Press the ▲▼◄► to select Unlock, and then

press the ENTER button. The Lock Service window appears.

Enter the Parental Security Code (See page

41). If you have not created a Parental Security Code, enter 0000.

Press the ENTER button. The Lock Service

Released window appears confirming the lock has been release, and then closes.

Delete

The Delete function lets you delete widgets from My Applications. To use the Delete function, follow these steps:

Press the YELLOW (C) button on your

remote.

Press the ▲▼◄► to select a widget, and

then press the ENTER button.

Press the ▲▼◄► to select Delete, and then

press the ENTER button. The message, “Do you want to delete selected item(s)?” appears.

Select Yes, and then press the ENTER

4. button. The widget is deleted.

The Sort Menu - GREEN (B)

The functions in the Sort Menu let you sort the widgets in My Applications by Name, Date, Frequency (of use), and Category. If you manually change the position of a widget, the Sort Menu automatically highlights User Defined when you start it.

To sort the widgets in My Applications, follow these steps:

Press the GREEN (B) button on your remote.

Press the ◄► to select a sorting method,

and then press the ENTER button. Smart Hub sorts the widgets by the method you have chosen.

Samsung Apps

Samsung Apps lets you download for pay or freeof-charge applications and services to your Bluray Disc player and view or use them on your TV.

These applications and services include videos, music, photos, games, news, sports, etc. Widgets for the new apps appear in My Applications.

Additional applications and services are added regularly.

For Pay Apps

To download for pay apps, you need to create a Samsung Apps account and add a credit card to the account.

To create a Samsung Apps account, please visit www.samsung.com

NOTE

✎

This service may not provided in some countries.

▪

Accessing the Samsung Apps Screen

To access Samsung Apps, press the ▲▼◄► buttons to navigate to the Samsung Apps area on the Smart Hub main screen, and then press the ENTER button. The Samsung Apps screen appears.

NOTE

✎

If this is the first time you are accessing this screen,

▪

the terms of service window appears. If you want to agree, select Agree, and then press the ENTER button.

Page 62

62 English

Network Services

Using the Samsung Apps Screen

To use the Samsung Apps screen, follow these steps:

Press the ◄► buttons to move to the

category list on the left.

Press the ▲▼ to highlight a category. In a few

seconds, the Samsung Apps screen displays the applications in that category. The Sort tabs appear across the top.

Press the ► button to move to the displayed

applications or services.

Press the ▲▼◄► buttons to select an

application or service, and then press the ENTER button. The Application Details screen appears describing the service or application.

Select Download Now, and then press the

5. ENTER button. If the application or service is

free, it downloads and runs. If not, and there is a fee, follow the directions on the screen to complete the download.

NOTE

✎

Some apps are free to download, but require

▪

registration with the provider or a paid account with the provider to use.

Widgets for applications and services you have

▪

downloaded from Samsung Apps appear in My Applications.

Sort By Tabs

You can access the Sort By tabs on the top of the screen using the ▲▼◄► buttons. Each tab displays the services or applications in the category you chose, sorted by the criteria on the tab (Recommended, Most Downloaded, Most Recent, Name).

You can also use the BLUE (D) button on your remote to access the Sort By tabs. Each time you press the BLUE (D) button, you change the display from one sort tab to the next.

Samsung Apps by category

The following categories are available:

What’s New? : Displays newly registered

• applications.

Video : Displays various video media such as

• movies, TV shows, and short length videos.

Game : Displays various games such as sudoku

• and chess.

Sports : Displays various sports media services

• such as match information, images, and short length videos.

Lifestyle : Includes various lifestyle media

• services such as music, personal photo management tools, and social networking such as Facebook and Twitter.

Information : Includes various information

• services such as news, stocks, and weather.

Other : Includes other miscellaneous services.

•

My Account

My Account gives you access to your Samsung Apps order and download history, and to the My Apps Cash screen. You must have a Samsung Apps account to access this information.

Help

If you have questions about Samsung Apps, check Help first. If none of the tips apply, please visit www.samsung.com.

To use the Help function, follow these steps:

Press the ▲▼◄► buttons to select Help,

and then press the ENTER button.

Press the ▲▼ to scroll the Help text.

Press the ◄ to exit Help.

Page 63

English 63

07 Network Services

Using the coloured buttons on your remote with Samsung Apps

RED (A) (Login) : To log into your Smart TV

• Account.

GREEN (B) (Thumbnail View/List View) : To

• toggle applications between Thumbnail and List view.

BLUE (D) (Sort By) : To sort the applications

• in a category by Recommended, Most Downloaded, Most Recent, or Name.

Return : To return to the previous menu.

•

NOTE

✎

The Internet contents services may be added or

▪

deleted by providers without notice.

For instructions to use Your Video or Search Function, please visit www.samsung.com

BD-LIVE™

Once the player is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc.

Attach a USB memory stick to the USB jack

on the side of the player, and then check its remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services.

Insert a Blu-ray Disc that supports BD-LIVE.

Select an item from various BD-LIVE service

contents provided by the disc manufacturer.

NOTE

✎

The way you use BD-LIVE and the provided contents

▪

may differ, depending on the disc manufacturer.

Using the AllShare Function

AllShare lets you play music, video, and photo files located in your PC or your DLNA compatible mobile phone or NAS on the player.

To use AllShare with your player, you must connect the player to your network (See pages 25~26). To use AllShare with your PC, you must install AllShare software on your PC.

If you have a DLNA compatible mobile phone or NAS, you can use AllShare without any additional software.

You can download the PC software and get detailed instructions for using AllShare from the Samsung.com web site.

Page 64

64 English

Appendix

Troubleshooting

Before requesting service, please check the following.

PROBLEM SOLUTION

No operation can be performed with the remote control.

Check the batteries in the remote control. They may need replacing.

•

Operate the remote control at a distance of no more than 6.1m.

•

Remove batteries and hold down one or more buttons for several minutes

•

to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again.

Disc does not play. Ensure that the disc is installed with the label side facing up.

Disc Menu does not appear. Ensure that the disc has disc menus.

The prohibition message appears on the screen.

Play mode differs from the Setup Menu selection.

The screen ratio cannot be changed. The Screen Ratio is ﬁxed on your Blu-ray Disc/DVD.

No audio. Make sure you have selected the correct Digital Output in the Audio Options

The screen is blocked If the HDMI output is set to a resolution your TV cannot support (for

•

Check the region number of the Blu-ray Disc/DVD.

•

This message appears when an invalid button is pressed.

•

The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).

•

You’ve requested a title or chapter number or search time that is out of

•

range.

Some of the functions selected in the Setup Menu may not work properly if

•

the disc is not encoded with the corresponding function.

•

This is not a problem with the player.

•

Menu.

•

example, 1080p), you may not see a picture on your TV. Press the STOP ( ) button (on front panel) for more than 5 seconds with

•

no disc inside. All settings will revert to the factory settings. When the factory default settings are restored, all stored user BD data is

•

deleted.

Page 65

English 65

08 Appendix

PROBLEM SOLUTION

Forgot password Press the STOP ( ) button (on front panel) for more than 5 seconds with

•

no disc inside. All settings including the password will revert to the factory settings. Don’t use this unless absolutely necessary.

When the factory default settings are restored, all stored user BD data is

•

deleted.

If you experience other problems. Go to the contents and ﬁnd the section of the user manual that contains the

•

explanations regarding the current problem, and follow the procedure once again.

If the problem still cannot be solved, please contact your nearest Samsung

•

authorized service centre.

The picture is noisy or distorted Make sure that the disc is not dirty or scratched.

No HDMI output. Check the connection between the TV and the HDMI jack of the player.

•

Clean the disc.

•

Check if your TV supports 576p/480p, 720p, 1080i, 1080p HDMI input

•

resolution.

Abnormal HDMI output screen. If random noise appears on the screen, it means that TV does not support

•

HDCP (High-bandwidth Digital Content Protection).

AllShare function

I can see folders shared through AllShare, but I cannot see the files.

AllShare shows only ﬁles corresponding to the Image, Music, and Movie

•

categories. Files that do not correspond to these categories may not be displayed.

Video is played intermittently. Check if the network is stable.

•

Check if the network cable is properly connected and if the network is not

•

overloaded. The wireless connection between the DLNA compatible device and the

•

player is unstable. Check the connection.

AllShare connection between TV and PC is unstable.

The IP address under the same subnetwork should be unique. If they are

•

not, IP interference can cause this phenomenon. Check if you have a ﬁrewall enabled.

•

If so, disable the ﬁrewall function.

Page 66

66 English

Appendix

PROBLEM SOLUTION

BD-LIVE

I cannot connect to the BD-LIVE server. Check whether the network connection is successful or not by using the

•

Network Status menu. (See page 39) Check whether the USB memory device is connected to the player.

•

The memory device must have at least 1GB of free space to accommodate

•

the BD-LIVE service. You can check the available size in BD Data Management. (See page 40)

Check whether the BD-LIVE Internet Connection menu is set to Allow(All).

•

If all above fails, contact the contents provider or update the player to the

•

latest ﬁrmware.

When using the BD-LIVE service, an error occurs.

NOTE

✎

When the factory default settings are restored, all stored user BD data is deleted.

▪

The memory device must have at least 1GB of free space to accommodate

•

the BD-LIVE service. You can check the available size in BD Data Management. (See page 40)

Repairs

If you contact us to repair your player, an administration fee may be charged if either:

An engineer is called out to your home at your request and there is no defect in the product.

You bring the unit to a repair centre and there is no defect in the product.

We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player. We recommend you read this manually thoroughly, search for a solution on line at www.samsung.com, or contact Samsung Customer Care before seeking to repair your player.

Page 67

English 67

08 Appendix

Specifications

Weight 1.7 Kg

General

Disc

Video Output

Video/Audio HDMI

Audio Output

Network

Design and specifications are subject to change without prior notice.

For the power supply and power consumption, refer to the label attached to the product.

Weight and dimensions are approximate.

Dimensions 430 (W) X 206 (D) X 37 (H) mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % BD (Blu-ray Disc) Reading Speed : 9.834 m/sec.

DVD (Digital Versatile Disc)

CD : 12 cm (COMPACT DISC)

CD : 8 cm (COMPACT DISC)

Composite Video

Component Video

2 Channel L(1/L), R(2/R) Digital Audio Output Optical

*Frequency Response

*S/N Ratio 110 dB *Dynamic Range 100 dB *Total Harmonic Distortion 0.003% Ethernet 10/100BASE-TX Terminal Wireless LAN Built-in

Security

WPS(PBC) Supported

Reading Speed : 6.98 ~ 7.68 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 20 min. 1 Channel : 1.0 Vp-p (75Ω load) Blu-ray/DVDs : 576i/480i Y : 1.0 Vp-p (75Ω load) PR : 0.70 Vp-p (75Ω load) PB : 0.70 Vp-p (75Ω load) Blu-ray Disc : 576i/480i DVD : 576p/480p, 576i/480i 2D : 1080p, 1080i, 720p, 576p/480p

3D : 1080p, 720p PCM multichannel audio, Bitstream audio

48 kHz Sampling : 4 Hz to 22 kHz 96 kHz Sampling : 4 Hz to 44 kHz

WEP (OPEN/SHARED) WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES)

*: Nominal specification

Page 68

68 English

Appendix

Compliance and Compatibility Notice

NOT ALL discs are compatible

Subject to the restrictions described below and those noted throughout this Manual, including the Disc

• Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.

Discs other than the above cannot and/or is not intended to be played by this player. And some of the

• above discs may not play due to one or more reasons provided below.

Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,

• DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to all operating commands or operate all features of every disc. These and other disc compatibility and player operation issues with new and existing format discs are possible because:

Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs

because some features may be optional, additional features may have been added to the Blu-ray Disc format after the production of this player, and certain available features may be subject to delayed availability;

not all new and existing disc format versions are supported by this player;

new and existing disc formats may be revised, changed, updated, improved and/or supplemented;

some discs are produced in a manner that allows specific or limited operation and feature during

playback; some features may be optional, additional features may have been added after the production of this

player or certain available features may be subject to delayed availability; some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and

CD-RW/-R logos may still be non-standardized discs; some discs may not be played depending on their physical state or recording conditions;

problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the

manufacture of discs; this player operates differently than a standard DVD player or other AV equipment; and/or

for reasons noted throughout this user manual and for other reason(s) discovered and posted by

SAMSUNG customer care centre.

If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer

• care centre. You may also contact SAMSUNG customer care centre for possible updates on this player.

For additional information on playback restrictions and disc compatibility, refer to the Precautions,

• Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this user manual.

Copy Protection

Because AACS (Advanced Access Content System) is approved as content protection system for

• Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact SAMSUNG customer care centre.

Page 69

English 69

08 Appendix

Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect

• your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected Blu-ray Disc/DVDs.

This item incorporates copy protection technology that is protected by U.S. patents and other

• intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,

• display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other materials may subject you to civil and/or criminal liability.

For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT

• ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.

Network Service Disclaimer

All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device.

THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Third party services may be terminated or interrupted at any time, and Samsung makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device.

Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers.

Page 70

70 English

Appendix

Licence

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol

• are trademarks of Dolby Laboratories.

Manufactured under licence under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380;

• 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

DivX

•

ABOUT DIVX VIDEO : DivX® is a digital video format created by DivX, Inc.

This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified® device must be registered in order to

play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under licence.

Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks

• or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names

• may be trademarks of their respective owners

This licence is limited to private non-commercial use by end-user consumers for licenced contents.

• No rights are granted for commercial use. The licence does not cover any product unit other than this product unit and the licence does not extend to any unlicenced product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The licence only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this licence for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Open Source Licence Notice

•

In the case of using open source software, Open Source Licences are available on the product

menu.

Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.

•

This item incorporates copy protection technology that is protected by U.S. patents and other

• intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Page 71

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Area Contact Centre

North America

Canada 1-800-SAMSUNG (726-7864) www.samsung.com Mexico 01-800-SAMSUNG (726-7864) www.samsung.com U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com

Latin America

Argentine 0800-333-3733 www.samsung.com Brazil 0800-124-421 / 4004-0000 www.samsung.com Chile 800-SAMSUNG (726-7864) www.samsung.com Colombia 01-8000112112 www.samsung.com Costa Rica 0-800-507-7267 www.samsung.com Dominica 1-800-751-2676 www.samsung.com Ecuador 1-800-10-7267 www.samsung.com El Salvador 800-6225 www.samsung.com Guatemala 1-800-299-0013 www.samsung.com Honduras 800-7919267 www.samsung.com Jamaica 1-800-234-7267 www.samsung.com Nicaragua 00-1800-5077267 www.samsung.com Panama 800-7267 www.samsung.com Peru 0-800-777-08 www.samsung.com Puerto Rico 1-800-682-3180 www.samsung.com Trinidad &

Tobago Venezuela 0-800-100-5303 www.samsung.com

Europe

Albania 42 27 5755 -

Austria

Belgium 02-201-24-18

Bosnia 05 133 1999 Bulgaria 07001 33 11 www.samsung.com Croatia 062 SAMSUNG (062 726 7864) www.samsung.com

Czech

Denmark 70 70 19 70 www.samsung.com Finland 030 - 6227 515 www.samsung.com France 01 48 63 00 00 www.samsung.com

Germany

Hungary 06-80-SAMSUNG (726-7864) www.samsung.com Italia 800-SAMSUNG (726-7864) www.samsung.com Kosovo +381 0113216899 Luxemburg 261 03 710 www.samsung.com Macedonia 023 207 777 Montenegro 020 405 888 -

Netherlands

Norway 815-56 480 www.samsung.com

Poland

Portugal 80820-SAMSUNG (726-7864) www.samsung.com

Rumania

1-800-SAMSUNG (726-7864) www.samsung.com

0810 - SAMSUNG (7267864, € 0.07/min)

800-SAMSUNG (800-726786) Samsung Zrt., česká organizační

složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

01805 - SAMSUNG (726-7864 € 0,14/Min)

0900-SAMSUNG (0900-7267864) (€ 0,10/Min)

0 801 1SAMSUNG (172678) / 022-607-93-33

1. 08010 SAMSUNG (72678) doar din reţeaua Romtelecom, tarif local

2. 021.206.01.10 - din orice reţea, tarif normal



Web Site

www.samsung.com

www.samsung.com/ be (Dutch) www.samsung.com/ be_fr (French)

www.samsung.com

Area Contact Centre

Serbia

Slovakia 0800-SAMSUNG (726-7864) www.samsung.com Spain 902-1-SAMSUNG (902 172 678) www.samsung.com Sweden 0771 726 7864 (SAMSUNG) www.samsung.com

Switzerland

U.K Eire 0818 717100 www.samsung.com Lithuania 8-800-77777 www.samsung.com Latvia 8000-7267 www.samsung.com Estonia 800-7267 www.samsung.com

CIS

Russia 8-800-555-55-55 www.samsung.com Georgia 8-800-555-555 Armenia 0-800-05-555 Azerbaijan 088-55-55-555 -

Kazakhstan

Uzbekistan 8-10-800-500-55-500 www.samsung.com Kyrgyzstan 00-800-500-55-500 www.samsung.com Tadjikistan 8-10-800-500-55-500 www.samsung.com

Ukraine 0-800-502-000

Belarus 810-800-500-55-500 Moldova 00-800-500-55-500 -

Asia Pacific

Australia 1300 362 603 www.samsung.com New Zealand China

Hong Kong (852) 3698 4698

India

Indonesia

Japan 0120-327-527 www.samsung.com Malaysia 1800-88-9999 www.samsung.com

Philippines

Singapore 1800-SAMSUNG (726-7864) www.samsung.com Thailand 1800-29-3232 / 02-689-3232 www.samsung.com Taiwan 0800-329-999 www.samsung.com Vietnam 1 800 588 889 www.samsung.com

Middle East

Bahrain 8000-4726 www.samsung.com Egypt 08000-726786 www.samsung.com Jordan 800-22273 www.samsung.com Morocco 080 100 2255 www.samsung.com Oman 800-SAMSUNG (726-7864) www.samsung.com Saudi Arabia 9200-21230 www.samsung.com Turkey 444 77 11 www.samsung.com U.A.E 800-SAMSUNG (726-7864) www.samsung.com

Africa

Nigeria 0800-SAMSUNG (726-7864) www.samsung.com South Africa 0860-SAMSUNG (726-7864 ) www.samsung.com

0700 Samsung (0700 726

7864)

0848-SAMSUNG (7267864, CHF 0.08/min)

0330 SAMSUNG (7267864) www.samsung.com

8-10-800-500-55-500 (GSM: 7799)

0800 SAMSUNG (0800 726 786) 400-810-5858 / 010-6475 1880

3030 8282 / 1800 110011 / 1800 3000 8282 / 1800 266 8282

0800-112-8888 / 021-5699-7777

1-800-10-SAMSUNG(726-7864) / 1-800-3-SAMSUNG(726-7864) / 1-800-8-SAMSUNG(726-7864) / 02-5805777



Web Site

www.samsung.com

www.samsung.com/ch www.samsung.com/ ch_fr/(French)

www.samsung.com

www.samsung.ua www.samsung.com/ ua_ru

www.samsung.com www.samsung.com www.samsung.com/hk

www.samsung.com/ hk_en/

www.samsung.com

Page 72

Page 73

BD-D6500

Blu-ray Disc

用户手册

用影像记录一切可能

感谢您购买此款为了获得更完善的服务，请在以下网站中注册您的产品

www.samsung.com/register

Samsung

产品。

播放机

Page 74

2 中国语

主要特性

Blu-ray

光盘支持业界可提供的最高质量的

Blu-ray

频

大容量意味着无损视频质量。

–

以下盘而异。外观和功能导航也会因光盘而异。并非所有光盘都具有下面所述的功能。

光盘功能与光盘相关，并且会因光

Blu-ray

光盘特性

视频要点

BD-ROM

包括还支持以下高清视频分辨率

•

格式支持三种非常先进的视频编解码器，

AVC、VC-1 和 MPEG-2

1920 x 1080 1280 x 720

高清晰度

。

用于高清播放

要观看

（高清电视）。

HDTV

一些

Blu-ray

才能观看高清内容。

OUT

根据电视的分辨率，观看容的能力可能会受到限制。

光盘上的高清内容，您需要一台

Blu-ray

光盘可能需要使用播放器的

Blu-ray

光盘上高清内

BD-LIVE

可以使用支持络连接下载光盘制造商提供的内容。

BD-LIVE 的 Blu-ray

光盘以通过网

HDMI

Blu-ray

视

光盘播放器功能

本播放器可以通过要实现

收机，器，然后在佩戴

效果，请将

兼容电视）通过

电缆播放

HDMI

设备（

HDMI

幻觉眼镜后播放

3D 兼容 AV

电缆连接至播放

Smart Hub

可以通过网络连接下载各种付费或免费应用程序。这些应用程序提供了各种其中包括新闻、天气预报、股市行情、游戏、电影和音乐。

Internet

服务和内容，

AllShare

可通过网络连接播放您设备（例如

设备）上的视频、音乐和照片。

NAS

播放多媒体文件

可以使用的各种多媒体文件（

连接来播放位于

USB

MP3、JPEG、DivX

USB

内容。

、手机或

存储设备上

等等）。

接

Page 75

中国语 3

安全信息

警告

为减少电击的危险，请勿卸下机盖（或背面机盖）。内部没有用户可维修的部件。请让合格的维修人员进行维修。

注意

有电击的危险，请勿打开。

三角形内的闪电和箭头是一个警告符号，提醒您产品内含“危险电压”。

不要将本产品安装在狭窄的空间中，例如书橱或类似的装置中。

警告

为避免可能导致火患或电击危险的损害，请勿将此产品放在在雨中或潮湿环境下。

注意

光盘播放机使用不可见的激光光线，如果

Blu-ray

被其直射，可能会处于危险的辐射之中。请务必根据指示正确操作

Blu-ray

注意

本产品使用激光。如果不按此处规定的控制、调校或操作过程进行操作，则可能会处于危险的辐射之中。不要打开盖子，也不要自行修理。请让合格的人员进行维修。

当使用屏蔽电缆和接头将装置连接至其他设备时，本产品符合等电子设备的电磁干扰，请使用屏蔽电缆和接头进行连接。

规定。要防止来自收音机和电视

注意

为减少电击的危险，请勿卸下机

盖（或背面机盖）。内部没有用户可维修的部件。请让合格的维修人员进行维修。

光盘播放机。

保险丝，然后安全地弃置插头。不要将插头连接至电源插孔，因为裸露的活动电线存在电击的风险。

要使装置与电源断开连接，必须从电源插座拔出插头，因此，电源插头必须易于操作。

附带提供本用户手册的产品装置获得特定第三方的特定知识产权许可。此许可证限制为最终用户消费者对许可内容进行私人非商业使用。

未授予任何进行商业使用的权限。该许可证不包括本产品装置以外的任何产品装置，

并且该许可证不延伸至任何与本产品装置搭配使用或售出的符合

13818-3

可证只包括使用本产品装置来对符合

11172-3 或 ISO/IEC 13818-3

码和/或解码。该许可证未授予对不符合

11172-3 或 ISO/IEC 13818-3

功能的权限。

安全信息

三角形内的感叹号是一个警告符号，提醒您产品随附的重要说明。

ISO/IEC 11172-3 或 ISO/IEC

的任何未授权产品装置或过程。该许

ISO/IEC

的音频文件进行编

ISO/IEC

的产品功能部件或

重要说明

本设备的电源插头配备含保险丝的压模插头。保险丝的值在插头的插脚面指示。如果需要更换，必须使用经过丝。如果保险丝盖子可拆，那么在没有保险丝盖子的情况下，切勿使用插头。如果需要替换保险丝盖子，则其颜色必须与插头的插脚面颜色相同。替换盖子可向经销商购买。

如果插头不适合家中的电源点，或者电线不够长，不能连接到电源点，那么必须购买合适的获得安全批准的延长线，或者咨询经销商以获得帮助。

但是，如果除了剪断插头以外别无他法，请取出

BS1362

核准的额定值相同的保险

Page 76

4 中国语

安全信息

注意事项

重要安全说明

使用装置前请仔细阅读这些操作说明。请按照下面列出的安全说明操作。请将这些操作说明妥善保管，以供将来参考。

请阅读这些说明。

请妥善保管这些说明。

注意所有警告。

请遵循所有说明。

切勿在近水处使用本设备。

清洁时只使用干布。

请勿堵塞任何通风口。根据厂商说明进行安装。

不要将本设备安装在任何靠近热源例如电暖炉、暖气片、电炉，或其它（包括会产生热气的设备。

请勿忽略极化或接地型插头的安全保护用途。极化型插头具有两边，有一边较另一边宽。接地型插头具有两边和第三端接地插脚。该宽边或第三端插脚专为您的安全而提供。如果所提供的插头不适用于您的插座，请联系电工更换旧插座。

10.

保护电线以防践踏或被挤压，特别是插头处、便利插座处以及设备接出处的电线。

11.

只使用厂商指定的附加装置/附件。

12.

仅可使用厂商指定或随设备出售的运载车、支架、三脚架、支架或工作台。使用运载车时，请小心避免在移动运载车/设备组合时翻覆。

13.

在雷雨天气或长时间不用的情况下，请拔下本设备的插头。

14.

所有维修均应由合格的维修人员执行。设备在具有任何方式的损坏时需要维修服务，例如电源线或插头损坏、设备内溅入液体或落入杂物、设备曾淋雨或浸水无法正常操作，或是跌落。

接收器）

使用

图像的重要健康和安全信息。

在使用息。

•

功能之前，请阅读并了解下列安全信

在观看适，例如头晕、恶心和头痛。如果您有任何此类症状，请停止观看取下

长时间观看果您感觉视疲劳，请停止观看

尽责的家长应该监督使用如果小孩报告视觉疲劳、头痛、头晕或恶心，请让小孩停止观看

不要将通眼镜、太阳镜、护目镜等等）。

走动时，不要使用如果走动时使用能会导致撞伤、绊倒和或跌落，并且可能导致严重伤害。

电视时，一些观看者可能会觉得不

主动式眼镜并休息。

主动式眼镜用于其它用途（例如普

功能观看

图像可能会导致视觉疲劳。如

电视并休息。

功能或

功能的儿童。

主动式眼镜，可

电视，取下

主动式眼镜。

电视，

Page 77

中国语 5

安全信息

光盘储藏和管理

光盘处理

光盘形状

•

使用形状规则的光盘。如果使用形状不规则的光盘（异形的光盘），则可能会损坏播放器。

拿取光盘

•

避免触摸已录有数据光盘的表面。

Blu-ray

•

DVD-VIDEO

•

光盘储藏

请务必小心，不要损坏光盘，因为这些光盘上的数据很容易受到环境影响。

•

光盘

请不要将取出

Blu-ray

请务必小心，不要在指纹或划痕。

用柔软的布料擦去光盘上的灰尘或脏物。

不要放在阳光直射处。应放在阴凉通风处。垂直储藏。放在干净的保护套内。如果突然将播放器从很冷的地方移到很暖和的

地方，操作部件和镜头可能会产生冷凝，从而导致光盘播放异常。如果发生这种情况，请将播放器断电并等待两个小时，然后再将插头连接至电源插座。然后插入光盘并再次尝试播放。

光盘长期置于播放器中。

Blu-ray

光盘并将其存储到光盘盒中。

光盘的表面留下

Blu-ray

、音频

CD (CD-DA)

处理注意事项

•

不要用圆珠笔或铅笔在印刷面上写字。

•

不要使用录制清洁喷剂或防静电剂清洁光盘。另外，不要使用苯和稀释剂等挥发性化学品。

•

不要将标签或贴纸贴到光盘上。（不要使用附有裸露的胶布或残留脱落的贴纸的光盘。）

•

不要使用防刮花保护膜或罩。

•

不要使用市面上可购买到的标签印刷机印制的光盘。

•

不要装入变形或刮花的光盘。

•

在将其它组件连接到播放器之前，请务必先将其它组件关闭。

•

正在播放光盘时不要移动播放器，因为光盘可能会被刮花或损坏，或者播放器的内部零件可能会被损坏。

•

不要将盛满水的花瓶或任何其它细小金属物放在播放器上。

•

请务必小心，不要将手放入光盘插槽中。

•

不要将光盘以外的任何物体放在光盘插槽中。

•

闪电和静电等外部干扰可能会影响播放器的正常操作。如果出现这种情况，请使用关闭然后重新打开播放器，或者从交流电源插座拔下交流电源线，然后重新连接。播放器将可正常操作。

•

在使用后，请务必取出光盘并关闭播放器。

•

如果有很长一段时间不会使用播放器，请从交流插座拔下交流电源线。

•

要清洁光盘，请由内向外沿直线擦拭光盘。

•

请勿将播放器暴露于任何液体中。

•

当将

插头连接到墙上插座时，

播放器在关闭后仍将通电（待机模式）。

•

不要将设备置于滴水或溅水的地方，同时不要将装有水的物件（如花瓶）放在设备上面。

•

将电源插头用作断开连接设备，它应该随时都可操作。

电源

按钮

Page 78

6 中国语

安全信息

机壳维护

清洁

电源线。

•

不要使用苯、稀释剂或其它溶剂进行清洁。

•

使用柔软的布料擦拭机壳。

播放限制

•

此播放器可能不能响应所有操作命令，因为一些许特定或有限的操作和功能。请注意，这不属于播放器缺陷。

•

Samsung ray

光盘格式不断发展，并且在制作

DVD 和 CD

题和发生错误。如果您在使用本播放器播放

中心联系。另外，请参阅本用户手册的余下部分以获取有关播放限制的其它信息。

光盘柜前，请务必从

Blu-ray

Blu-ray、DVD 和 CD

不能保证本播放器可播放带有

光盘、

DVD 或 CD

软件和/或生产光盘时可能出现问

时遇到问题或困难，请与

徽标的每张光盘，因为

插座拔下

光盘在操作期间只允

Blu-ray

Blu-ray、DVD 或

SAMSUNG

Blu-

光盘、

客户

Page 79

中国语 7

主要特性

安全信息

开始使用

Blu-ray

警告

注意事项

4 4 4 5 5

11 11 11 12 12 13 13 14 15 15 16 17 18 18 19

重要安全说明

使用

光盘储藏和管理

光盘处理

在使用用户手册之前

播放器可播放的光盘类型和内容如下播放器无法播放的光盘类型

Blu-ray

光盘类型地区代码版权受支持的文件格式播放器可播放光盘的徽标

附件前面板后面板遥控器

遥控器一览设置遥控器以操作电视

光盘特性光盘播放器功能

功能观看

光盘兼容性

中国语

连接

20 20

21 22

连接至电视

例子

1 :使用 HDMI

（建议）

例子

2 :

例子

3 :

电缆连接至电视

使用分量电缆连接至电视通过音频/视频电缆连接电视

最佳质量

一般质量

Page 80

8 中国语

连接

设置

连接至音频系统

23 23

连接至网络

25 25 26

初始设置

访问设置菜单

显示

29 29 30 30 30 30 32 32 33 33 33

音频

33 33 35 35 35 35

网络

36 36 39 40

例子

连接至音频系统（支持

1 :

收器

）

最佳质量（建议）

例子

连接到音频系统（支持杜比数码或

2 :

解码器的例子

质量

有线网络无线网络

设置

电视屏幕比例

Smart Hub BD Wise

分辨率

HDMI

电影帧

HDMI

静止模式渐进模式

数字输出

PCM

动态范围控制缩混模式

DTS Neo:6

网络设置网络状态

BD-LIVE Internet

接收器）

连接至音频系统（立体声放大器）

3 :

屏幕尺寸

（仅限

颜色格式

(24Fs)

深色

向下取样

模式

较好质量

Samsung

连接

HDMI 的 AV

播放器）

DTS

接

一般

Page 81

中国语 9

设置

中国语

基本功能

系统

40 40 40 40 41 41 41 41 41 41 41 41 42 42 42 42 42 42 44

45 45 45 45 45 46 46 46 46 46 46 47 47 47

初始设置

Anynet+(HDMI-CEC)

光盘数据管理

Blu-ray

时区

视频点播

DivX®

重设

语言安全

家长分级控制

DVD

更改密码

常规

前端显示光效网络遥控器

支持

软件升级联系

Samsung

播放视频

播放光盘结构

使用光盘菜单/标题菜单/弹出菜单

使用光盘菜单使用标题菜单播放标题列表使用弹出菜单

使用搜索和跳过功能

搜索所需的场景跳过章节

重复播放

重复标题或章节重复部分

Page 82

10 中国语

基本功能

网络服务

慢动作播放/逐帧向前播放

47 47 47 48 48 48 48 48 49 49 49 50 50 50 51 51 52 52 52 53

54 54 57 59 61 61 61 63 63

慢动作播放逐个动作播放

使用工具按钮

直接移到所需的场景变为全屏选择图像设置选择音频语言选择字幕语言更改相机视角设置

BONUSVIEW

聆听音乐

遥控器上用于音乐播放的按钮播放音频

CD (CD-DA)/MP3

重复音频

CD (CD-DA)/MP3

播放列表

播放图像

播放

JPEG

使用工具按钮

使用

Samsung Apps

BD-LIVE ™

使用

存储设备播放

USB

Smart Hub

首次启用

Smart Hub

设置菜单

- 蓝色 (D)

编辑模式菜单排序菜单

- 绿色 (B)

付费应用程序

AllShare

文件

- 黄色 (C)

功能

附录

64 66 67

故障排除

维修

规格

Page 83

中国语 11

开始使用

在使用用户手册之前

播放器可播放的光盘类型和内容如下

术语徽标图标定义

这涉及以

BD-RE

格式录制的

BD-ROM 或 BD-RE/-R

视频

这涉及

DVD-VIDEO

DVD-RW(V)/DVD-R/+R

上或已录制且已最终化的

光盘上的可用功能。

音乐

照片

x o

这涉及在包含光盘或

这涉及在音频

这涉及在包含或

USB

这涉及在包含存储媒体中可用的功能。

DivX、MKV 和 MP4

存储媒体中可用的功能。

USB

CD-RW/-R（CD-DA

MP3 或 WMA

存储媒体中可用的功能。

内容的

JPEG

CD-RW/-R、DVD-RW/-R、BD-RE/-R

内容的

光盘上的可用功能。

DVD+RW/

内容的

CD-RW/-R、DVD-RW/-R、BD-RE/-R

格式）上可用的功能。

CD-RW/-R、DVD-RW/-R、BD-RE/-R

光盘或

开始使用

光盘

USB

注

✎

由于光盘类型或录制条件，播放器可能无法播放某些

▪

如果未以

▪

如果内容在录制到

▪

如果内容在录制到

▪

DVD

格式正确录制

DVD-R

BD-R 或 USB

DVD-RW/-R

上时的采样率超过

设备上时的采样率超过

播放器无法播放的光盘类型

•

HD DVD

•

DVD-ROM/PD/

光盘等等

•

DVD-RAM

•

超级音频

（

层除外）

光盘，则它将不可播放。

10 Mbps

CD-RW/-R 和 DVD-R

，那么播放器将无法播放此内容。

30 Mbps

•

DVD-RW（VR

•

CVD/CD-ROM/CDV/ CD-G/CD-I/LD

（

CD-G

不能播放视频。）

。

，那么播放器将无法播放此内容。

模式）

只能播放音频，

•

用于创作的

DVD-R

3.9 GB

光盘。

Page 84

12 中国语

开始使用

注

✎

对于在您所在地区之外购买的一些商业光盘和

▪

光盘，可能不能使用本播放器进行播放。

DVD

对于某些类型的光盘，或者使用特定功能（例如更

▪

改角度和调整宽高比）时，播放功能可能不起作用。光盘的相关信息在光盘盒上详细说明。如果需要，请参阅此信息。

不要使光盘变脏或刮花。录制面上的指纹、污物、

▪

灰尘、划痕或香烟灰会使得无法使用光盘进行播放。播放

▪

些，一些功能可能运行速度较慢。此播放器可能不能响应所有操作命令，因为一些

▪

Blu-ray、DVD 和 CD

或有限的操作和功能。请注意，这不是播放器缺陷。

Samsung

▪

光盘、式不断发展，并且在制作

误。如果您在使用本播放器播放时遇到问题或困难，请与系。另外，请参阅本用户手册的余下部分以获取有关播放限制的其它信息。

Blu-ray

在光盘兼容性问题。并非所有光盘都兼容，并且不是每张光盘都可播放。有关其它信息，请参阅本用户手册中的“符合性和兼容性声明”一节。

标题时，加载时间可能比普通标题长一

BD-J

光盘在操作期间只允许特定

不能保证本播放器可播放带有

DVD 或 CD

软件和/或生产光盘时可能出现问题和发生错

徽标的每张光盘，因为光盘格

光盘、

Blu-ray

Blu-ray、DVD 或 CD

SAMSUNG

光盘兼容性

光盘是新的发展格式。相应地，可能会存

Blu-ray

DVD 和

客户中心联

光盘类型

BD-ROM

光盘只能用于播放。

Blu-ray

本播放器可以播放预先录制的商业盘。

BD-RE/-R

Blu-ray RE/-R

本播放器可以播放其它兼容的机录制的

光盘可以录制和播放。

BD-RE/-R

DVD-VIDEO

•

本播放器可以播放含有电影的预先录制的商业

DVD（DVD-VIDEO

•

从双层

DVD-VIDEO

层时，图像和声音可能会瞬间失真。这并非播放器功能异常。

DVD-RW/-R/+R

本播放器可以播放使用终化的

DVD-RW/-R/+R

于录制条件。

DVD+RW

•

本播放器可以播放使用

DVD+RW

音频

•

本播放器可以播放光盘。

•

由于录制条件，本播放器可能无法播放某些

CD-RW/-R

光盘。播放能力可能取决于录制条件。

CD (CD-DA)

光盘。

光盘）。

光盘的第一层切换到第二

DVD

光盘。播放能力可能取决

DVD

格式的音频

CD-DA

BD-ROM

Blu-ray

视频录制机录制和最

视频录制机录制的

光

光盘录制

CD-RW/-R

Page 85

中国语 13

开始使用

CD-RW/-R

•

使用

700MB（80

如果可能，不要使用上容量的光盘，因为此类光盘可能无法播放。

•

如果

CD-RW/-R

可能会在播放光盘的开头时遇到延迟，或者所有已录制的文件都无法播放。

•

某些

CD-RW/-R

放，具体视用于烧录光盘的设备而定。对于从

刻录到

容，播放能力可能会因内容和光盘而异。

（高级高清视频编解码器）

AVCHD

•

此播放器可播放盘通常在摄录机中录制和使用。

•

✎

格式是高清晰度数字视频摄像机格式。

AVCHD MPEG-4 AVC/H.264

常用的图像压缩格式的效率。一些

AVCHD

播放器可以播放采用“

光盘。

AVCHD “x.v.Color”是 Sony Corporation “AVCHD”和 AVCHD

Electronic Industrial Co., Ltd. 和 Sony Corporation

注

一些

AVCHD

▪

制条件而定。

AVCHD

“

x.v.Color

▪

光盘更大。一些

DivX、MKV 和 MP4

▪

放，具体视光盘分辨率和帧速条件而定。

分钟）

CD-RW/-R

800MB（90

光盘未录制为闭合的区段。则

光盘可能无法使用本播放器播

CD-RW/-R

光盘采用“

的商标。

格式的光盘需要最终化。

媒体上供个人使用的内

AVCHD

格式压缩图像的效率高于

x.v.Color

徽标是

格式的光盘可能无法播放，具体视录

”提供的颜色范围比普通

分钟）或以

格式的光盘。这些光

x.v.Color

”格式的

Matsushita

格式的光盘可能无法播

光盘。

”格式。此

的商标。

DVD

摄录机

地区代码

播放器和光盘都是按地区编码的。此类地区编码必须与要播放的光盘相匹配。如果编码不匹配，光盘将无法播放。此播放器的“地区编号”位于播放器的后面板上。

光盘类型地区代码地区

光盘

Blu-ray

DVD-VIDEO

北美洲、中美洲、南美洲、韩国、

日本、台湾、香港和东南亚。

欧洲、格陵兰、法国未成为省的领土、中东、非洲、澳大利

亚和新西兰。

印度、中国、俄国、中亚和南亚。

美国、美国未成为省的领土和

加拿大。

欧洲、日本、中东、埃及、南

非和格陵兰

台湾、韩国、菲律宾、印度尼

西亚和香港

墨西哥、南美洲、中美洲、澳大利亚、新西兰、太平洋群岛

和加勒比

俄国、东欧、印度、非洲大部

分地区、北朝鲜和蒙古

中国

版权

的书面允许，严禁转化或复制本用户手

Co.,Ltd.

册的任何部分或整本用户手册。

Samsung Electronics

Page 86

14 中国语

开始使用

受支持的文件格式

连接注意事项

USB

•

播放器支持

•

此播放器不支持超过

•

一些

USB

•

播放器支持

•

将

设备直接连接到播放器

USB

•

将多个内存设备连接到多卡读卡器中，可能导致读卡器无法正常操作。

•

播放器不支持

•

在“加载”过程中不要断开

•

图像分辨率越大，显示延迟的时间越长。

•

此播放器无法播放从商业网站下载的带有

•

不支持外部

•

播放器仅支持

视频文件支持

文件扩展名容器视频编解码器音频编解码器分辨率

*.avi

*.mkv

*.wmv

*.mp4

*.mpg

*.mpeg

存储介质、

USB

128

或数码相机设备可能与此播放器不兼容。

FAT16、FAT32 和 NTFS

协议。

PTP

设备。

HDD

（帧率）以下的视频。

30fps

AVI

MKV

WMV (wmv9)

MP4

播放器、数码相机和

MP3

个字符的文件夹名称或文件名称。

文件系统。

端口。通过

USB

设备连接。

DivX 3.11/4.x/5.1/6.0

H.264 BP/MP/HP

DivX 5.1/6.0

H.264 BP/MP/HP

MP4 (mp4v)

H.264 BP/MP/HP

USB

（数字版权管理）功能的

DRM

XviD

MP4v3

VC-1 AP

XviD

VC-1 AP VC-1 SM

MPEG1 MPEG2

读卡器。

USB

电缆连接可能会导致兼容性问题。

文件。

MP3

MP3 AC3 DTS

WMA

PCM

MP3 AC3 DTS

WMA

AAC

MP1, 2

AC3 DTS

1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080

音乐文件支持

文件扩展名容器音频编解码器支持范围

*.mp3

*.wma

MP3

WMA

MP3 -

WMA

符合

采样率

比特率

WMA V10

标准

(kHz) – 8、11、16、22、32、44.1、48 – 5kbps 到 384kbps

范围内的所有比特率

Page 87

中国语 15

开始使用

播放器可播放光盘的徽标

2D�3D

1 2 3

4 5 6

7 8 9

光盘

Blu-ray

BD-LIVE Dolby TrueHD

检查下面列示的随附附件。

音频/视频电缆遥控器电池（

用户手册遥控器

3D Blu-ray

光盘

DTS-HD Master Audio DivX

英国、法国、德国等国家

地区中的

PAL

广播制式

附件

AAA

Java

型）

Page 88

16 中国语

开始使用

5V 500mA

前面板

b ca

h g f e d

遥控器感应器

电源按钮

光盘插槽

弹出按钮

确认按钮

播放/暂停按钮

停止按钮

显示屏

USB HOST

注

✎

使用带有

▪

播放器显示

▪

须在光盘菜单中选择播放电影或开始，然后按确认按钮。

USB

Blu-ray

闪存棒的

USB Host

光盘菜单时，此刻按下播放器或遥控器上的“播放”按钮不能开始播放电影。要播放电影，必

检测来自遥控器的信号。

打开或关闭播放器。

插入光盘。

弹出光盘。

选择菜单项或启动光盘。

播放光盘或暂停播放。

停止播放。

显示播放状态、时间等。

可在此处连接也可将

插孔即可完成软件升级。

USB

USB Host

闪存棒，并在播放器连接至

用于软件升级和

MP3/JPEG/DivX/MKV/MP4

BD-LIVE

时将其用作存储器。

播放。

Page 89

中国语 17

开始使用

后面板

b ca

f e

DIGITAL AUDIO OUT

LAN

HDMI OUT

COMPONENT OUT

VIDEO OUT

AUDIO OUT

连接到

可用于基于网络的服务（请参阅第软件升级。

使用佳画质，或者连接至

连接到具有分量视频输入的外部设备。

使用视频电缆连接到外部设备的视频输入。

使用音频电缆连接到外部设备的音频输入。

HDMI

接收器。

电缆，将此

54~63

输出端子连接到电视的

HDMI

接收器以取得最佳音质。

页）、

和使用网络连接进行的

BD-LIVE

HDMI

输入端子以取得最

Page 90

18 中国语

开始使用

INTERNET@

1 2

4 5 6

7 8 9

遥控器一览

遥控器

按下以切换

打开或关闭播放器。

弹出光盘。

按下使用

bonusview

按数字按钮可以操作选项。

Blu-ray 光盘/DVD

按下以向后路过或向前跳过。

按下以停止光盘。

用以进入光盘菜单。

按下以移至主菜单。

用以使用

Tools

返回到上一个菜单。

按下以使用

按下以搜索内容。

使电视的扬声器静音。

功能。

的字幕

语言。

（工具）菜单。

Smart Hub

电视音量调整。

打开和关闭电视。

（有关电视操作，请参阅第

设置后，可让您设置电视上的输入源。

。

用以访问光盘（各种音频功能。

按下以向后或向前搜索光盘。

按下以暂停光盘。按下以播放光盘。

用以进入弹出菜单/标题菜单。

用以在播放放信息。

用以选择菜单项和更改菜单值。

按下以退出菜单。

这些按钮不但可用于播放器上的菜单，而且可用于多个

可让您重复标题、章节、曲目或光盘。

用以选择电视频道。

Blu-ray 光盘/DVD

光盘功能。

Blu-ray

页）

）上的

期间显示播

安装电池

注

✎

如果遥控器无法正常操作

▪

•

检查电池的正负极。

•

检查电池电量是否已耗尽。

•

检查遥控器感应器是否被障碍物挡住。

•

检查附近是否有荧光灯照明。

注意

根据当地环境法规处置电池。切勿将其放入家庭垃

▪

圾。

Page 91

中国语 19

开始使用

设置遥控器以操作电视

可以使用此遥控器来控制电视的某些功能。

按钮功能

电视电源用于打开和关闭电视。

电视节目源用于选择连接到电视的外部来源。

电视音量

电视频道

电视静音用于打开和关闭声音。

注

✎

▪

要确定您的电视是否兼容，请按照下面的步骤操作。

打开电视。

使遥控器对着电视。

按住应于电视品牌的两位数代码（按相应的数字按钮进行输入）。如果您的电视与遥控器兼容，电视将会关闭。遥控器现已设定为操作此电视。

注

✎

▪

用于调节电视的音量。

(+/–)

用于选择所需的频道。

(,/.)

上面列出的功能不一定在所有电视上都起作用。如果遇到问题，请使用电视遥控器。

电视电源

按钮，然后输入右侧表格中对

如果列出几个代码表示您的电视品牌，请依次尝试每个代码，直到找到起作用的代码为止。

如果您更换遥控器的电池，您必须重新设置品牌代码。

电视控制代码

品牌代码

SAMSUNG

ANAM

BANG & OLUFSEN

BLAUPUNKT

BRANDT

BRIONVEGA

CONTINENTAL

EDISON

DAEWOO

EMERSON

FERGUSON

FINLUX

FORMENTI

FUJITSU

GRADIENTE

GRUNDIG

HITACHI

IMPERIAL

LOEWE

LOEWE OPTA

MAGNAVOX

METZ

MITSUBISHI

MIVAR

NEWSAN

AIWA

CGE

JVC

NEC

+01, +02,

电视电源

+03, +04, +05, +06, +07, +08, +09

+82

电视电源

+10, +11,

电视电源

+12, +13, +14, +15, +16, +17, +18

+57

电视电源

+71

电视电源

+73

电视电源

+57

电视电源

+52

电视电源

+75

电视电源

+19, +20,

电视电源

+23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34

+64

电视电源

+73

电视电源

+06, +49,

电视电源

+57

电视电源

+84

电视电源

+70

电视电源

+49, +52,

电视电源

+71

+60, +72,

电视电源

+73, +75

+52

电视电源

+61, +79

电视电源

+06, +19,

电视电源

+20, +21, +22, +78

+06, +69

电视电源

+06, +57

电视电源

+40

电视电源

+57

电视电源

+06, +48,

电视电源

+62, +65

+52, +77

电视电源

+83

电视电源

+68

电视电源

品牌代码

NOBLEX

电视电源

NOKIA

电视电源

PHILIPS

PIONEER

RADIOLA

RCA

REX

SABA

SALORA

SANYO

SELECO

SHARP

SIEMENS

SINGER

SONY

TELEAVA

TOSHIBA

WEGA

YOKO

ZENITH

电视电源

+75

电视电源

+74, +75

电视电源

+56, +57

电视电源

+57

电视电源

+73, +74

电视电源

+73, +74, +75

电视电源

+43, +44, +48

电视电源

+38, +39, +48

电视电源

+75, +76

电视电源

+75

电视电源

+49, +50, +51, +52

电视电源

NORDMENDE

PANASONIC

PHONOLA

RADIOMARELLI

SCHNEIDER

SINUDYNE

TELEFUNKEN

THOMSON

THOMSON ASIA

+66

+74

+72, +73,

+53, +54,

+06, +55,

+06, +56,

+58, +59,

+06, +56

+57

+45, +46

+74

+57, +72,

+74

+41, +42,

+06

+74

+36, +37,

+71

+57

+35, +48

+73

+67, +73,

+72, +73,

+80, +81

+47, +48,

+57

+06

+63

Page 92

20 中国语

连接

连接至电视

例子

✎

使用

1 :

使用打开播放器和电视。请按电视遥控器上的输入选择器，直到播放器的

•

如果已设置播放器的遥控器来操作电视（请参阅第选择

注

HDMI

▪

如果以

▪

HDMI

▪

如果电视不支持根据电视，某些

▪

使用

▪

辨率。必须具有

▪

HDMI

▪

使用

▪

听见声音。

HDMI

电缆，将播放器后面的

HDMI

作为电视的外部来源。

HDMI

电缆会输出数字视频/音频，因此不需要连接音频电缆。

HDMI 720p、1080i 或 1080p

只将纯数字信号输出至电视。

电缆首次将播放器连接至电视或连接至新的电视时，

HDMI

电缆过长时，可能会导致屏幕噪讯。如果出现这种情况，请在菜单中将深色设置为关闭。

HDMI-to-DVI

电缆连接至电视

HDMI OUT

输出模式将播放器连接至电视，则必须使用高速（类别 2）

（高带宽数字连接保护），那么屏幕上将出现雪花信噪。

HDCP

输出分辨率可能不起作用。请参阅电视的用户手册。

HDMI

连接才能欣赏采用

电缆连接显示设备时，还必须将

技术的视频。

最佳质量（建议）

端子连接到电视的

信号显示在您的电视屏幕为止。

HDMI

页），请按遥控器上的

HDMI

输出或数字音频输出连接到显示设备或者音频系统，才能

HDMI IN

HDMI

（不包括）

输出分辨率将自动设置为电视支持的最高分

电缆

端子。

电视节目源

HDMI

按钮并

电缆。

Page 93

中国语 21

连接

例子

可以使用分量视频电缆将播放器连接到电视。

将欣赏到精确颜色重现的高质量图像。分量视频将图片元素分离为黑白号以呈现清楚且清晰的图像。（音频信号通过音频输出提供。）

使用分量电缆连接至电视

2 :

使用分量视频电缆，将播放器后面的量输入）端子。

使用音频电缆，将播放器后面的

白色）

端子。打开播放器和电视。请按电视遥控器上的输入选择器，直到播放器的“

•

如果已设置播放器的遥控器来操作电视（请参阅第选择

COMPONENT

作为电视的外部来源。

AUDIO OUT

最佳质量

COMPONENT OUT

（红色和白色）

端子连接到电视的

COMPONENT

页），请按遥控器上的

音频电缆

、蓝色

(Y)

”信号显示在您的电视屏幕为止。

和红色

(PB)

COMPONENT IN

AUDIO IN

电视节目源

（红色和

分量电缆

（不包括）

(PR)

（分

按钮并

信

红

白色红蓝绿

注

✎

根据制造商，电视上的分量端子可能会标记为“

▪

数量和位置可能因电视机而异。请参阅您电视的用户手册。

可以从多种分辨率设置中选择，如

▪

如果同时连接了分量和

▪

（请参阅

30~32

HDMI

页）

R-Y、B-Y、Y

1080i、720p、576p/480p 或 576i/480i

电缆，则实际分辨率可能会不同于设置菜单中的设置。分辨率可能因内容类型而异。

”或“Cr、Cb、Y”而不是“

，具体视内容类型而定。（请参阅

、

、Y”。端子的

30~32

页）

Page 94

22 中国语

连接

例子

通过音频/视频电缆连接电视

3 :

使用音频/视频电缆，将播放器后面的到电视的

打开播放器和电视。请按电视遥控器上的输入选择器，直到播放器的“

•

VIDEO IN

如果已设置播放器的遥控器来操作电视（请参阅第选择

VIDEO

白色红黄

（黄色）

作为电视的外部来源。

/AUDIO IN

VIDEO OUT

（红色和白色）

一般质量

（黄色）

端子。

”信号显示在您的电视屏幕为止。

VIDEO

页），请按遥控器上的

/AUDIO OUT

（红色和白色）

电视节目源

音频/视频电缆

端子连接

按钮并

注

✎

如果音频电缆离电源线太近，则可能会产生噪讯。

▪

如果要连接到

▪

输入端子的数目和位置可能会因电视而异。请参阅电视的用户手册。

▪

注意

不要通过

▪

接收器，请参阅

将播放器与电视连接。

VCR

接收器连接页。（请参阅第

连通的视频信号可能会受到版权保护系统的影响，电视图像将会失真。

VCR

23~24

页）

Page 95

中国语 23

连接

•

在打开

•

根据

接收器的功能设置音频输出格式。（请参阅

•

输入端子的位置可能因

HDMI

连接至音频系统

接收器时，请调小音量。突然的大声可能会导致扬声器损坏和耳朵损伤。

页）

33~35

接收器而异。请参阅

接收器的用户手册。

例子

连接至音频系统（支持

1 :

使用使用打开播放器、电视和请按

收器的用户手册以设置

电缆，将播放器后面的

HDMI

电缆，将

HDMI

接收器和电视的输入选择按钮并选择外部输入，以收听来自播放器的声音。请参阅

接收器的

接收器。

接收器的音频输入。

HDMI 的 AV

HDMI OUT

接收器

端子连接到

端子连接到电视的

HDMI 电缆

（不包括）

）

最佳质量（建议）

接收器的

HDMI IN

端子。

接

HDMI 电缆

（不包括）

Page 96

24 中国语

连接

例子数码或

连接到音频系统（支持杜比

2 :

DTS

解码器的

接收器）

较好质量

使用光纤电缆，将播放器后面的

AUDIO OUT (OPTICAL)

器的

DIGITAL AUDIO IN (OPTICAL)

使用视频信号电缆，将播放器背面的

COMPONENT

视的

HDMI、COMPONENT

子。（请参阅第

打开播放器、电视和

请按

接收器

入，以收听播放器的声音。请参阅的用户手册以设置

请按电视遥控器上的输入选择器，选择视频来源（

HDMI、Component 或 Video

VIDEO OUT

或

页）

20~22

的输入选择按钮并选择外部输

接收器

例子

2 :

（不包括）

DIGITAL

端子连接到

端子连接到电

VIDEO IN

或

接收器。

的音频输入。

光纤电缆

端子。

HDMI

接收器

）。

接收

端

、

例子大器）

连接至音频系统（立体声放

3 :

一般质量

使用音频电缆，将播放器后面的

红色和白色

( AUDIO IN (

使用视频信号电缆，将播放器背面的

COMPONENT

视的

HDMI、COMPONENT

子。（请参阅第打开播放器、电视和立体声放大器。请按

立体声放大器输入，以收听播放器的声音。请参阅器

的用户手册以设置

请按电视遥控器上的输入选择器，选择视频来源（

端子连接到立体声放大器的

)

红色和白色

VIDEO OUT

或

页）

20~22

的输入选择按钮，选择外部

立体声放大器

HDMI、Component 或 Video

例子

端子。

)

音频电缆

3 :

端子连接到电

VIDEO IN

或

的音频输入。

AUDIO OUT

HDMI

端

立体声放大

）。

、

白色红

注

✎

如果使用例子

▪

中所述的数字音频连接，则只能通过支持

数字输出设置的前面两个扬声器收听音频。

PCM

Page 97

中国语 25

连接

连接至网络

连接到网络时，此播放器允许您使用基于网络的服务（请参阅第

以及软件升级。建议使用

LIVE

请参阅路由器的用户手册，或者请与路由器制造商联系以获得技术协助。

（接入点）或

路由器来进行连接。有关路由器连接的更多信息，

54~63

有线网络

使用直接连接的

要设置网络选项，请参阅第

LAN

电缆（

电缆），将播放器的

UTP

页。

36~40

端子连接至调制解调器的

LAN

路由器

页），例如

Smart Hub 和 BD-

端子。

LAN

宽带调制解调器

（含有集成路由器）

宽带服务

注

✎

可能无法通过互联网访问

▪

更多信息，请与您的对于

用户，请使用路由器来建立网络连接。

DSL

▪

要使用

AllShare

▪

连接可以是有线连接或无线连接。

Samsung

ISP（Internet

功能，必须将计算机连接至网络，如图中所示。

或

与计算机连接以使用

AllShare 功能

的软件升级，具体视所用的路由器或

服务提供商）联系。

宽带调制解调器

宽带服务

的政策而定。有关

ISP

Page 98

26 中国语

连接

无线网络

播放器具有内置要设置网络选项，请参阅第

宽带服务

与计算机连接以使用

功能

AllShare

注

✎

要使用无线网络，必须将播放器连接至无线

▪

使用

DHCP

为无线

▪

会导致干扰和通信失败。如果选择“纯高通”

▪

则播放器将不支持符合新的如果

AP 支持 WPS（Wi-Fi Protected Setup，Wi-Fi

▪

按钮配置）或

SSID 和 WPA

可采用三种方法设置无线网络

▪

无线（常规）

使用

WPS (PBC)

One Foot Connection

无线（常规）包括“自动”和“手动”设置过程。无线

LAN

▪

将无线

▪

本播放器只支持下列无线安全密钥协议

▪

WEP (

要使用

AllShare

▪

功能。可以通过无线

Wi-Fi

或静态

分配器选择当前未在使用中的通道。如果附近另一个设备当前正在使用为无线

天生会导致干扰，因操作条件而异（

分配器设置为

开放式/共享式

36~39

无线

分配器

地址连接至无线网络。

(Greenfield) 802.11n

Wi-Fi

PIN（Personal Identification Number

密钥。

。

Infrastructure

), WPA-PSK(TKIP/AES), WPA2-PSK(TKIP/AES)

功能，必须将计算机连接至网络，如图中所示。连接可以是有线连接或无线连接。

分配器（路由器或调制解调器）连接到网络。

页。

分配器（路由器）。如果无线

模式并且将

认证规范的连接。

性能、距离、障碍物、其他无线设备干扰等等）。

模式。不支持对等模式。

分配器支持

的加密类型设置为

保护设置），则您可以通过

，个人识别号）连接到网络。

WEP、TKIP 或 TKIPAES (WPS2Mixed)

PBC（Push Button Configuration

，则播放器可以

DHCP

分配器设置的通道，则

将在任一模式中自动配置

WPS

，

Page 99

中国语 27

设置

初始设置

连接播放器后打开电视。第一次将播放器连接至电视时，播放器会自动打开并显示“初始设置”屏幕。

初始设置

屏幕语言

选择屏幕显示的语言。

English 中文

◄►

按

按钮选择所需的语言，然后按

确认

按钮。

按确认按钮选择开始。

按

按钮选择所需的电视高宽比，然后按

▲▼

确认

按钮。（请参阅第

◄►

按

按钮选择所需的“网络设置”

线、无线（常规）、

Connection

，然后按确认按钮。如果您不知

道您的“网络设置”，请改为按遥控器上的

色

按钮跳过“网络设置”，在此时跳过“网

(D)

络设置”，完成“初始设置”，然后转到主菜单。如果您选择了“网络设置”，请转到页获得有关“网络设置”的更多信息。完成后，转到步骤 6。

主菜单将会出现。（有关主菜单的更多信息，请参阅第

页。）

确认

< 移动 "

页）

WPS(PBC) 或One Foot

36~40

主菜单

•

设置

我的内容

视频

照片

音乐

我的设备互联网设置

d PBC(WPS)

注

✎

第一次将播放器连接至电视时，播放器将会自动打

▪

开。这不是故障。如果不按下面所述配置初始设置，则主菜单不会出

▪

有

蓝

现。如果在网络设置期间按

▪

蓝色

(D)

按钮，则可以访问

主菜单，即使尚未完成网络设置也是如此。如果您要再次显示“初始设置”屏幕来进行更改，

▪

请选择“重置”。（请参阅第如果您要使用

▪

电缆将播放器连接至符合

HDMI

Anynet+(HDMI-CEC)

应在电视和播放器上将

1.)

功能设置为打开。

应将电视设置为播放器支持的语言，电视自动

2.)

页）

的 Samsung

电视。

Anynet+(HDMI-CEC)

将该语言作为首选语言。如果播放器保留在停止模式超过

▪

分钟未使用，则

电视上会出现屏幕保护程序。如果播放器保留在屏幕保护程序模式超过

分钟，则电源会自动关闭。

Page 100

28 中国语

设置

2D�3D

1 2 3

4 5 6

7 8 9

访问设置菜单

2 4

菜单

要访问“设置”菜单和子菜单，请按照下面的步骤操作

•

按钮:按此按钮可移至主菜单。

按钮:返回到上一个菜单。

确认/方向

按钮

移动光标或选择项目。激活当前选中的项目。确认设置。

退出

按钮:按此按钮可以退出当前菜单。

按

按钮。

电源

主菜单将会出现。

主菜单

◄►

按

按钮选择设置，然后按确认按钮。

按

按钮选择所需的子菜单，然后按

▲▼

按钮。

按

按钮选择所需的项目，然后按确认按

▲▼

钮。

按

按钮退出菜单。

退出

注

✎

播放器连接到网络时，选择主菜单上的

▪

（智能集线器）。

从

Samsung Apps

（请参阅第

访问步骤可能会因选择的菜单而异。

▪

升级软件版本后，播放器中的

▪

61~63

下载所需的内容。

页）

可能会更改。

设置菜单

•

设置

显示

音频

网络

系统

语言

安全

常规

支持

设置

播放模式

3D Blu-ray

屏幕大小

: 55

HDMI 深色 :

设置

> 移动

自动

英寸

" 确认 '

（屏幕显示）

OSD

自动

Smart Hub

确认

我的内容

视频

照片

音乐

我的设备互联网设置

选择我的设备。

选择我的内容。

选择互联网。

选择设置。

显示可用的按钮。

d PBC(WPS)

以下为:“设置”菜单显示“ 设置菜单设有以下菜单项

•

显示

•

音频

•

网络

•

系统

•

语言

•

安全

•

常规

•

支持

设置”子菜单。

以下页面按上述顺序介绍各个菜单项，从“显示” 开始。