Samsung AW05MDYEA User Manual
DB98-08575A(1)
AW05MDYEA
Window-type Room Air Conditioner
(Cool)
ER
OWNER’S
INSTRUCTIONS
E-2
The following safety precautions must be taken when installing
and using your air conditioner.
Safety Precautions
1 The air conditioner must be plugged into its own specific power source, which must be
installed in compliance with national wiring, earthing and safety regulations.
Depending on national regulations and your specific installation, you may need to install:
◆ A circuit breaker
For further information on electrical requirements, contact a professional electrician.
This device must be installed according to the national electrical rules.
2 Make sure that the unit is correctly ventilated at all times;
do NOT place clothing or other materials over it.
4 Do NOT insert anything between the air outlet blades, as it may damage the inner fan
and you may be hurt. Keep children away from the unit.
5 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
6 Do NOT attempt to repair the unit yourself. If it is damaged in any way, contact:
◆ An authorized service center
◆ The dealer from whom you purchased the air conditioner.
7 Do NOT place any blocking objects in front of the unit.
3 NEVER spill liquids of any kind into the unit.
Should this happen, unplug the unit and contact your installation specialist.
8 If the remote control will not be used for a long time, remove the batteries.
9 Before throwing out the device, it is necessary to pull back the battery cells
and get rid of them safely.
10 The appliance is not intended for use by young children or infirm person without supervision;
young children should be supervised to ensure that they do not play with the appliance.
11 Do NOT use an extension cord with this product.
The manufacturer does not assume responsibility for accidents or injury
caused by an incorrectly installed air conditioner. If you are unsure about
installation, contact an installation specialist.
CCCCAAAAUUUUTTTTIIIIOOOONN
NN
E-3
Contents
◆ PREPARING YOUR
AIR CONDITIONER
■ Safety Precautions ......................................................................................... 2
■ Description of Each Component .................................................................... 4
■ Getting Started ............................................................................................... 5
◆ OPERATING YOUR AIR CONDITIONER
■ Cooling Your Room ........................................................................................ 6
■ Airing Your Room ........................................................................................... 7
■ Removing Excess Humidity ............................................................................ 8
■ Adjusting the Air Flow Direction Horizontally .................................................. 9
◆ P
ROGRAMMING YOUR
AIR CONDITIONER
■ Setting the On Timer ...................................................................................... 10
■ Setting the Off Timer ...................................................................................... 11
■ Setting the Sleep Timer .................................................................................. 12
■ Selecting Energy Saving mode ...................................................................... 13
◆ RECOMMENDATIONS FOR USE
■ Temperature and Humidity Ranges ................................................................ 13
■ Cleaning Your Air Conditioner ........................................................................ 14
■ Solving Common Problems ............................................................................ 15
■ Technical Specifications ................................................................................. 15
◆ I
NSTALLATION
E-4
Description of Each Component
Inner air flow blades
(right/left orientation)
Air outlet
Outer air flow blades
Air inlet (Inside)
Adhesive bottom
gasket
(Refer to page 17)
Air inlet (Outside)
Air outlet
Air filter (Inside)
Power plug
(The type of power plug
may differ, depending on
the local power supply.)
Temperature/
Timer settings
Temperature adjustment
buttons
Fan speed
adjustment button
On/Off button
Energy Saver
indicator
Sleep timer setting button
Timer indicator
Energy Saver
button
Mode selection button
(Cool, Fan, Dry)
Timer setting button
E-5
Getting Started
IMPORTANT NOTE
You have just purchased a Samsung window-type room air conditioner which should be installed
following your installation manual.
Your Owner’s Instructions contain much valuable information on using your air conditioner.
Please take the time to read them as they will help you take full advantage of the unit’s features.
The booklet is organized as follows.
◆ The following figures are shown on pages 4 :
- Description of Each Component
They will help you find the buttons and understand the symbols displayed.
◆ In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use four different symbols:
☛
➢
PRESS PUSH
E-6
Cooling Your Room
To adjust the temperature, press the or buttons on the unit one
or more times until the desired temperature is displayed.
The temperature can be set between 18°C and 30°C.
Result
:◆ Each time you press the or buttons:
– The temperature is adjusted by 1°C and displayed on
the control panel
– The unit beeps
◆
The air conditioner starts cooling, if the room temperature is
higher than the selected temperature.
3
Press the (On/Off) button.
Result:
◆ The air conditioner starts up in the mode selected when the
unit was last used.
◆ The unit beeps twice.
☛
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
If the temperature is not displayed on the control panel:
◆
Press the button on the unit one or more times until the
temperature is displayed.
Result
:◆ The unit beeps each time you press the button.
◆
The air conditioner starts up in the Cool mode.
➢
You can change modes at any time.
You must select the Cool mode if you wish to lower the temperature
in your room. You can also set the Fan speed.
1
2
To set the fan speed:
◆
Press the button on the unit one or more times until the
desired Fan speed(F1, F2 or F3) is displayed.
Low
Medium
High
4
To control the direction of the air flow, refer to page 9.
5
c
Loading...