Samsung AHT24P1HEC, AHT24P1HEA, AHT24P1HBA, AHT18P1HEA, AHT18P1HBA User Manual

OWNER’S INSTRUCTIONS

AHT18P1HBA/BB AHT18U1HBA/BB

AHT18P1HEA/EB/EC AHT18U1HEA/EB/EC

AHT24P1HBA/BB AHT24U1HBA/BB

AHT24P1HEA/EB/EC AHT24U1HEA/EB/EC

Window-type Room Air Conditioner

( Cool and Heat)

E A

DB98-17029A(5)

Safety Precautions

The following safety precautions must be taken when using your air conditioner.

WARNING

DURING OPERATION

ISPOSING OF THE UNIT

OTHERS

Risk of electric shock. • Can cause injury or death. • Disconnect all

electric power supplies before servicing, installing or cleaning.

remote

• This must be done by the manufacturer or its service agent or a similar person in order to avoid a hazard.

qualified

Users of this product are cautioned not to attempt repair of this product at their own

discretion. Instead, they are requested to directly contact a designated

center or the outlet at which the product was purchased.

service

Never spill any kind of liquid into the unit. Should this happen, unplug or main

off the unit and contact an authorized service center.

switch

Do not insert anything between the air outlet blades because the inner fan may be

damaged and could cause injury. Keep children away from the unit.

Do not place any obstacles in front of the unit.

Do not spray liquid of any kind into the indoor unit. Should this happen, switch off the

breaker used for your air conditioner and contact your installation specialist. Make sure that the unit is correctly ventilated at all times: Do

not place clothing or other materials over it.

If the wireless remote control will not be used for a long time, remove the batteries.

When using a wireless remote control, the distance should not be more than 7 meters

The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring,earthing and safety regulations.

If the power cord is damaged in any way, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

This device must be installed according to the national electrical rules.

The appliance must be installation that the plug should be easily accessible after installation.

If the fuse on PC board is broken please change it with the type of T 3.15A 250V.

The breaker of the air conditioner should be all-pole switch; and the distance between its two contacts should be no less than 3.5mm. Such means for disconnection must be incorporation in the fixed wiring.

Before throwing out the device, it is necessary to pull back the battery cells and get

When you need to dispose of the unit, consult your dealer. If pipes are removed incorrectl injur

Please recycle or dispose of the packaging material for this product in an environmentally

Never store or ship the air conditioner upside down or sideways to avoid damage to

The appliance is not intended for use by young children or infirm persons without supervision: with

Max current is measured according to IEC standard for safety and current is measured

(If applicable)

from the air conditioner. (If applicable)

rid of them safely for recycling reasons.

y, refrigerant may blow out and come into contact with your skin,causing

y. Releasing refrigerant into the atmosphere also damages the environments.

responsible manner.

the compressor.

Young children should be supervised to ensure that they do not play

the appliance.

according to ISO standard for energy efficiency.

E-2

Contents

◆ PREPARING

■ Safety Precautions ......................................................................................... 2

■ Air Conditioning Unit - Main Parts and Control Panel .................................... 4

■ Getting Started ............................................................................................... 5

YOUR AIR CONDITIONER

◆ OPERATING YOUR AIR CONDITIONER

■ Heating Your Room ........................................................................................ 6

■ Cooling Your Room ........................................................................................ 7

■ Airing Your Room ........................................................................................... 8

■ Switching the Air Conditioner Off .................................................................... 8

■ Adjusting the Air Flow Direction Horizontally .................................................. 9

■ Adjusting the Air Flow Direction Vertically ...................................................... 9

ECOMMENDATIONS FOR USE

◆ R

■ Operating Recommendation ........................................................................... 10

■ Temperature and Humidity Ranges ................................................................ 11

■ Cleaning Your Air Conditioner ........................................................................ 12

■ Solving Common Problems ............................................................................ 13

■ Technical Specifications ................................................................................. 14

◆ M

ETHOD OF

INSTALLATION ................................................................................. 15

E-3

Air Conditioning Unit - Main Parts and Control Panel

❄ The design and shape are subject to

change, depending on the model.

Air inlet(Inside)

Inner air flow blades (right/left orientation)

Outer air flow blades (up/down orientation)

Air filter(Inside)

Operating mode

selection dial

BLUE BROWN

Main Power Earth

YELLOW/GREEN

Air inlet (Outside)

Ventilation lever

Power Cable

❈ Power cable connection

should be committed to an installation engineer.

Cooling lamp

Temperature control dial

E-4

Air flow blade swing switch

Getting Started

You have just purchased a window-type room air conditioner and it has been installed by your installation specialist.

Your Owner’s Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s features.

The booklet is organized as follows.

◆ The illustration on page 4 shows the air conditioning unit;

it indicates the location and purpose of the main parts and controls on the unit.

◆ In the manual, you will find a series of step-by-step

procedures for each function available.

The illustrations in the step-by-step procedures use four different symbols:

☛

PRESS PUSH IMPORTANT NOTE

➢

E-5

Heating Your Room

You must select the HEAT mode if you wish to higher the temperature in your room. You can also set the fan speed.

Select the operating mode and fan speed.

To Heat your room Set the operating mode with a... selection dial to...

High fan speed Hi Heat

Low fan speed Low Heat

29˚C ~

27˚C

27˚C ~ 23˚C

23˚C ~

18˚C

Result: ◆

➢

To adjust the temperature, turn the temperature control dial

to the red position. (Left side)

Result:

To control the direction of the air flow, refer to page 9.

The air conditioner starts up in Heat mode.

◆

The fan starts up at the speed selected.

You can change modes at any time.

The air conditioner is started heating, if room temperautre is lower than selected temperature.

E-6

+ 12 hidden pages