
Thermostats
Frost Protection Thermostat Type 5312-2
Mounting and
Operating Instructions
EB 5207 EN
Edition September 2008
Fig. 1 · Type 5312-2 Frost Protection Thermostat

2 EB 5207 EN
DANGER!
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
NOTICE
NOTICE indicates a property damage
message.
Note: Supplementary explanations, infor
-
mation and tips
Definitions of the signal words used in these instructions

1 General safety instructions
For your own safety, follow these instructions concerning the mounting, start-up and opera
-
tion of the thermostat:
4
The thermostat may only be mounted, started up or operated by trained and experienced
personnel familiar with the product.
According to these Mounting and Operating Instructions, trained personnel refers to
individuals who are able to judge the work they are assigned to and recognize possible
dangers due to their specialized training, their knowledge and experience as well as their
knowledge of the relevant standards.
4
On wiring and connecting the thermostat, you are required to observe the VDE
regulations and the regulations of the local power suppliers. Therefore, this type of work
must only be performed by trained personnel.
To avoid damage to any equipment, the following also applies:
4
Proper shipping and appropriate storage are assumed.
Note:
The device with a CE marking fulfills the requirements of the Directives 89/336/EEC.
The Declaration of Conformity is available on request.
EB 5207 EN 3
General safety instructions