Salicru SPS 750 ADV R, SPS 1000 ADV R, SPS 1500 ADV R User manual

USER MANUAL

UNINTERRUPTIBLE POWER SUPPLY SYSTEMS (UPS)

SPS ADVANCE R & T
0,75.. 1,5 kVA & 0,85.. 3 kVA

2 SALICRU

General index.

1. INTRODUCTION.

1.1. THANK YOU LETTER.

2. SAFETY INFORMATION.

2.1. USING THIS MANUAL.

2.1.1. Conventions and symbols used.

3. QUALITY ASSURANCE AND STANDARDS.

3.1. STATEMENT BY THE MANAGEMENT.

3.2. STANDARDS.

3.3. ENVIRONMENT.

4. PRESENTATION.

4.1. VIEWS.

4.1.1. Views of the device.

4.1.1.1. Views of the SPS ADVANCE R device.

4.1.1.2. Views of the SPS ADVANCE T device.

4.2. DEFINITION OF THE PRODUCT.

4.2.1. Nomenclature.

4.3. OPERATING PRINCIPLE.

5.2.3. Output terminals (only in SPS ADVANCE T 3 KVA models).

5.2.4. Connection to the optional battery module (backup
extension).

5.2.5. Terminals for EPO (emergency power off).

5.2.6. Communication port.

5.2.6.1. RS232 and USB port.

5.2.7. Smart slot for t he integration of an elec tronic communication
unit (SNMP).

5.2.8. Management and monitoring software.

5.2.9. Considerations before start-up with connected loads.

6. OPERATION.

6.1. S TA R T UP.

6.1.1. Checks before start-up.

6.2. UPS START-UP AND SHUTDOWN.

6.2.1. UPS start-up with mains voltage.

6.2.2. UPS start-up without mains voltage.

6.2.3. UPS shutdown with mains voltage.

6.2.4. UPS shutdown without mains voltage.

4.3.1. Operating diagram

4.3.2. Notable features.

4.4. OPTIONAL EXTRAS.

4.4.1. Isolation transformer:

4.4.2. Communication card.

4.4.2.1. Integration into computer networks using an SNMP
adap ter.

4.4.3. Extendable guide kits for mounting in a rack cabinet (only in

SPS ADVANCE R models).

5. INSTALLATION.

5.1. RECEPTION OF THE DEVICE.

5.1.1. Reception, unpacking and contents.

5.1.2. Storage.

5.1.3. Transport to the site.

5.1.4. Siting, immobilising and considerations.

5.1.4.1. Rack-type mounting in a 19” cabinet (SPS ADVANCE R
devices).

5.1.4.2. Preliminary considerations before connection.

5.1.4.3. Preliminary considerations before connection, regarding
the batteries and their protections.

7. CONTROL PANEL WITH LCD DISPLAY.

7.1. COMPOSITION OF THE CONTROL PANEL WITH LCD
DISPLAY.

7.2. GENERAL INFORMATION.

7.2.1. Information represented by the display.

7.3. AUDIBLE ALARMS.

7.4. WARNING AND ERROR OR FAULT CODES.

8. MAINTENANCE, WARRANTY AND SERVICE.

8.1. BATTERY MAINTENANCE.

8.1.1. Notes for the installation and replacement of the battery.

8.2. UPS TROUBLESHOOTING GUIDE.

8.3. WARRANTY CONDITIONS.

8.3.1. Terms of the warranty.

8.3.2. Exclusions.

8.4. TECHNICAL SERVICES NETWORK.

9. ANNEXES.

9.1. GENERAL TECHNICAL SPECIFICATIONS.

9.2. GLOSSARY.

5.2. CONNECTIONS.

5.2.1. Connection of the input.

5.2.2. Connection of the IEC output connectors.

SPS ADVANCE R & T UNINTERRUPTIBLE POWER SUPPLY (UPS)USER MANUAL

3

1. INTRODUCTION.

1.1. THANK YOU LETTER.

We thank you in advance for the trust placed in us in the pur­chasing of this product. Read this instruction manual carefully in
order to familiarize yourself with its content, since the more you
know and understand the equipment the greater your satisfac­tion, level of safety and optimization of its functionalities will be.
We remain at your disposal for any additional information or
queries that you may wish to make.

Yours sincerely.

SALICRU

• The equipment described herein is capable of causing

significant physical damage in the event of improper
handling. For this reason its installation, maintenance

and/or repair must be carried out exclusively by our per­sonnel or by qualified personnel.

• Although no effort has been spared to ensure that the in-

formation in this user manual is complete and accurate, we
are not responsible for any errors or omissions that may
exist.
The images included in this document are for illustrative
purposes and may not represent exactly the parts of the
equipment shown, therefore they are not contractual. How­ever, any divergence that may arise will be remedied or
solved with the correct labelling on the unit.

• Following our policy of constant evolution, we reserve

the right to modify the characteristics, operations
or actions described in this document without prior
notice.

• Reproduction, copying, assignment to third parties,

modification or total or partial translation of this manual

or document, in any form or by any means, without pre-

vious written authorization by our firm is prohibited,

with the full and exclusive property rights over the same
being reserved by our firm.

4 SALICRU

2. SAFETY INFORMATION.

2.1. USING THIS MANUAL.

The documentation of any standard equipment is available to the
customer on our website for download (www.salicru.com).

• For devices “powered by socket”, this is the website for

obtaining the user manual and “Safety Instructions”
EK266*08.

• For devices with “permanent connection” via terminals, a

CD-ROM or pen drive containing all necessary information
for connection and start-up, including “Safety Instruc-

tions” EK266*08, may be supplied with it.

Before carrying out any action on the device relating to its instal­lation or start-up, change of location, configuration or handling
of any kind, carefully read the safety instructions.
The purpose of the user manual is to provide information re­garding safety and explanations of the procedures for installa­tion and operation of the equipment. Read them carefully and
follow the steps indicated in the order established.

Compliance with the “Safety Instructions” is ob-

ligatory, with the user being legally responsible for

observing and applying them.

2.1.1. Conventions and symbols used.

Some symbols may be used and appear on the equipment, bat­teries and/or in the context of the user manual.
For more information, see section 1.1.1 of document EK266*08
on "Safety instructions".

The equipment is delivered properly labelled for the correct
identification of each of the parts, which together with the in­structions described in this user manual allows the operations
of installation and commissioning to be performed in a simple
and orderly manner without having any doubts whatsoever.
Finally, once the equipment is installed and operating, it is rec­ommended to save the documentation downloaded from the
website, CD-ROM or Pen Drive in a safe and easy-to-access
place, for any future queries or doubts that may arise.
The following terms are used interchangeably in the document
to refer to:

• “SPS ADVANCE R, ADVANCE R, ADV R, R, R device, R

unit or R UPS” - Uninterruptible power supply.

Depending on the context of the phrase, it can refer either
to the actual UPS itself or to the UPS and the batteries,
regardless of whether it is all assembled in the same metal
casing - box - or not.

• “SPS ADVANCE T, ADVANCE T, ADV T, T, T device, T

unit or T UPS” - Uninterruptible power supply.

Depending on the context of the phrase, it can refer either
to the actual UPS itself or to the UPS and the batteries,
regardless of whether it is all assembled in the same metal
casing - box - or not.

• “Batteries or accumulators”.- Group or set of elements

that stores the flow of electrons by electrochemical means.

• “T.S.S.” - Technical Service and Support.

• “Client, installer, operator or user” - These are used

interchangeably and by extension to refer to the installer
and/or operator who will carry out the corresponding ac­tions, and the same person may be responsible for carrying
out the respective actions when acting on behalf of, or in
representation of, same.

SPS ADVANCE R & T UNINTERRUPTIBLE POWER SUPPLY (UPS)USER MANUAL

5

3. QUALITY ASSURANCE AND STANDARDS.

3.1. STATEMENT BY THE MANAGEMENT.

Our goal is customer satisfaction, therefore this Management
has decided to establish a Quality and Environment Policy,
through the implementation of a Quality and Environmental
Management System that will enable us to comply with the
requirements demanded in the ISO 9001 and ISO 14001 and
also by our Customers and Stakeholders.
Likewise, the management of the company is committed to
the development and improvement of the Quality and Environ­mental Management System, through:

• Communication to the entire company of the importance of

satisfying both the client's requirements as well as legal
and regulatory requirements.

• The dissemination of the Quality and Environment Policy

and the setting of the Quality and Environment objectives.

• Conducting reviews by the Management.

• Providing the necessary resources.

3.2. STANDARDS.

The SPS ADVANCE R and SPS ADVANCE T are designed, man­ufactured and sold in accordance with Quality Management
Standard EN ISO 9001. The marking indicates conformity
with EC Directives through the application of the following
standards:

• 2014/35/EU. - Low voltage safety.

• 2014/30/EU. - Electromagnetic Compatibility - EMC-.

• 2011/65/EU. - Restriction of the use of hazardous substances

in electrical and electronic equipment (RoHS).

3.3. ENVIRONMENT.

This product has been designed to respect the environment and
manufactured according to ISO 14001.

Recycling of the equipment at the end of its useful life:

Our company undertakes to use the services of authorized and
regulatory companies to treat the set of products recovered at
the end of their useful life (contact your distributor).

Packaging:

For the recycling of the packaging there must be compliance
with the legal requirements in force, according to the specific
regulations of the country where the equipment is installed.

Batteries:

Batteries pose a serious danger to health and the environment.
The disposal of them shall be carried out in accordance with
the laws in force.

According to the specifications of the harmonized standards.
Reference standards:

• EN-IEC 62040-1. Uninterruptible Power Supplies -UPS-. Part

1-1: General and safety requirements for UPS used in user
access areas.

• EN-IEC 62040-2. Uninterruptible Power Supplies -UPS-. Part

2: EMC requirements.

The manufacturer is not liable in case of modification or

intervention on the equipment by the user.

WARNING!:

SPS.ADVANCE R 0.75..1.5 kVA and SPS.ADVANCE T

0.85..3 kVA. These are category C2 UPSs. In residential
environments, this product may cause radio interference,
in which case the user must take additional measures.

These devices should not be used with basic life sup-

port (BLS) applications, where a power failure can
render the life support equipment out of service or
significantly affect its safety or effectiveness. It is also
not recommended in medical applications, commercial
transport, nuclear installations, or other applications or
loads, where a failure of the product can lead to per­sonal or material damages.

The EC declaration of conformity of the product is avail-

able to the customer upon express request to our head­quarters.

6 SALICRU

4. PRESENTATION.

4.1. VIEWS.

4.1.1. Views of the device.

Fig. 1 and Fig. 2 correspond to SPS ADVANCE R devices and Fig.
3 and Fig. 4 to SPS ADVANCE T devices. However, because the
product is constantly evolving, discrepancies or slight contra­dictions may arise. If in any doubt, the labelling on the equip­ment itself will always prevail.

The nameplate of the device shows all of the values

relating to its main properties and characteristics. Act
accordingly for its installation.

4.1.1.1. Views of the SPS ADVANCE R device.

Fig. 1. Front view of the SPS ADVANCE R.

IEC AC input

connector

AC input protection

fuse

IEC AC output

sockets

Control panel with
LCD display

Plastic front trim

RS232 COM

port

Smart slot

protective cover

For connection to

external EPO

Fig. 2. Rear view of the SPS ADVANCE R.

SPS ADVANCE R & T UNINTERRUPTIBLE POWER SUPPLY (UPS)USER MANUAL

7

4.1.1.2. Views of the SPS ADVANCE T device.

850 to 2000 VA models.

Front view of the device.

3000 VA models.

Control panel
with LCD display

Plastic front
trim

Batteries modules for 1000 to 2000 VA models.

Plastic front
trim

Front view of the batteries modules.

Battery module for 3000 VA model.

Front view of the device.

Control panel
with LCD display

Plastic front
trim

Plastic front trim

Front view of the battery module.

Fig. 3. Front view of SPS ADVANCE T devices according to power and battery modules.

8 SALICRU

850 to 2000 VA models.

1000 to 2000 VA B1 models.

Fan

IEC AC output

sockets

3000 VA model.

Fans

RS232 COM

RS232 COM

port

USB COM

port

Rear view of the standard device.

port

USB COM

port

For connection to
external EPO

Smart slot
protective cover

AC power
protection breaker

IEC AC input
connector

Fan

Battery

connector

RS232 COM

3000 VA B1 model.

Fans

RS232 COM

port

port

USB COM

port

Rear view of the B1 device.

USB COM

port

For connection to
external EPO

IEC AC output
sockets

AC power
protection breaker
IEC AC input
connector
Smart slot
protective cover

Smart slot
protective cover

For connection to
external EPO

IEC AC output
sockets

Output terminal
cover

AC power
protection breaker

IEC AC input
connector

Rear view of the standard device.

Fig. 4. Rear views of devices according to power.

Smart slot
protective cover

For connection to
external EPO

IEC AC output
sockets

Output terminal
cover

AC power
protection breaker

Battery
connector

IEC AC input
connector

Rear view of the B1 device.

SPS ADVANCE R & T UNINTERRUPTIBLE POWER SUPPLY (UPS)USER MANUAL

9