salicru ACV30-PV, ACV30-015-S2 PV IAB, ACV30-022-4 PV IAB, ACV30-015-S2 PV IAD, ACV30-022-S2 PV IAD Brochure

ACV30-PV

Solar-powered pumping cabinets

ACV30-PV: Complete solution for solar-powered pumping facilities

The ACV30-PV cabinets offer a fully finished solution for solar-powe- red pumping facilities that use pumps of up to 5.5 kW. Depending on the model, they can be mounted indoors or outdoors, and offer the option of isolated systems (powered solely by solar panels), systems with automatic switchover to the power generator or mains, and systems with manual switchover.

They incorporate the CV30-PV drive, which is specifically designed for solar-powered pumping, and depending on the model they also include the BOOST MOD-320-PV booster module, which significantly reduces the number of panels required. They are equipped with the necessary protection at the solar panel input (DC circuit breaker and over-voltage protector) and, where applicable, the AC input (circuit breaker and contactor). As the distance between the drive and the pump can be considerable, all models are fitted with an output ferrite in order to prevent potential pump breakdowns; moreover, for particularly long distances (usually over 100 metres), the option of cabinet-mounted sine-wave filters is available.

To ensure full control of the system, the cabinets also include a water level sensor and digital clock/timer. This can be used to protect the pump against dry operation, and to set the system’s operating times. Without a doubt, it is a solution that offers installers tremendous convenience and reliability, owing to the fact that potential issues with mounting and configuration are reduced to a minimum.

Applications:

The main application of the ACV30-PV solar-powered pumping cabinets is agricultural irrigation, either via the accumulation of water in a tank or feeder pool for subsequent use or via direct irrigation from a well.

Other applications include domestic consumption in isolated areas, livestock water supply, fish farming, municipal and forestry irrigation, and desert control.

Performances

∙Simple to install and configure.

∙Indoors or outdoors mounting.

∙ Isolated power supply or with automatic/manual switchover.

∙Optional booster module.

∙DC circuit breaker.

∙AC circuit breaker for models with switchover to the generator or

mains.

∙DC over-voltage protector (Type II, 1,000 VDC).

∙24 VDC water level sensor + weights.

∙ Clock/timer for ON/OFF control.

∙ Control console and ON/OFF switch on the cabinet door (indoor mounting).

∙Status indicator lights and ON/OFF switch on the cabinet door (outdoor mounting).

∙Output ferrite.

∙ATS automatic switchover module (>2.2 kW models with switchover).

∙Optional cabinet-mounted sine wave filter, recommended for systems where the distance between the drive and the pump is over 100 metres.

	Indoor mounting model		Outdoor mounting model

For added convenience, these models incorporate a control console mounted on the door of the cabinet. Thanks to this design feature, users do not need to open the cabinet in order to change the parameters or check the status of the system. Moreover, ample space has been set aside to incorporate additional control elements, in accordance with the needs of each facility.

For these models, the ON/OFF control and system status indicators are accessed via buttons on the door of the cabinet, thereby maintaining a high level of protection. The cabinet also includes a rain canopy to provide even more protection against inclement weather.

Dimensions

600 / 500 mm	600 / 500 mm

800 / 700 mm	870 / 770 mm

300 mm

325 mm

ACV30-PV Indoor mounting

ACV30-PV Outdoor mounting