SALICRU SLC ADAPT2 10, SLC ADAPT2 15, SLC ADAPT 25X, SLC ADAPT 30, SLC ADAPT / 2 User Manual
...
SLC ADAPT / 2
Modular Uninterruptible Power Supply (UPS) from 10 to 1,500 kVA
SLC ADAPT / 2
Modular Uninterruptible Power Supply (UPS) from 10 to 1,500 kVA
Maximum availability and improved energy efficiency
Salicru’s SLC ADAPT and SLC ADAPT2 series is a range of modular
On-line double-conversion (VFI) UPS systems that provide maximum
electrical protection to connected loads and, at the same time, flexibility
and adaptability to the growth needs of the facility, yielding substantial
financial and energy savings.
The solution consists of power modules with ratings of from 10 to 50 kVA
located in cabinets of up to 12 modules which, in turn, can form solutions
of up to 30 modules, providing maximum flexibility and scalability in
solutions ranging from 10 kVA to 1,500 kVA and configurations in
parallel or redundant for greater security of protected loads.
For its part, the 3-level On-line double-conversion technology with
IGBT used is the best guarantee for a clean, reliable, continuous and
economical output supply. In addition, the high performance achieved in
On-line mode (>95%) improves the total cost of ownership (TCO), under
the operating expenses (OPEX) heading, and the Smart-efficiency or
Eco-mode options, depending on the protection needs of the system,
can increase the solution’s performance up to 99%.
Finally, the wide range of options available, including numerous
communication possibilities and backup adaptable to the needs of
the facility, enables full integration of the solution, providing greater
availability and reliability.
2
Modularity
Wide range of power modules available
Modules available with power ratings of 10, 15, 25, 30 and 50 kVA,
adaptable to any initial power needs and anticipated future growth.
Pay as you grow’ planning.
Vertical scalability up to 500 kVA per cabinet
Wide range of configurations in cabinets of 2, 3 or 4 modules or cabinets
of 6, 8, 10 or 12 modules, enabling configurations from 1x10 kVA (10
kVA) to 10x50 kVA (500 kVA) in a single cabinet.
The widest range of configurations
for medium-sized power solutions.
Hot-swap and hot-plug connection
Hot-swap and hot-plug modules that enable the service to remain
uninterrupted for operations of expansion/maintenance/replacement
of power modules, bypass module or touchscreen display.
Enables adaptation to future needs without interrupting the protection
of critical loads, achieving, at the same time, a mean time to repair
(MTTR) of less than 10 minutes.
Modularity up to 500 kVA
Horizontal scalability up to 1,500 kVA per system
Possibility of configuring systems using cabinets in parallel with
configurations from 1x10 kVA (10kVA) to 3x500 kVA (1,500 kVA).
More power and flexibility for medium-sized facilities with the need
for growth or high power.
++
Modularity up to 1,500 kVA
3
Availability
Module out of service
N+1 redundancy N+2 redundancy
Load supported by each module
Configurable redundancy N+1, N+2,…,
Configurable level of redundancy according to the needs of each
facility, reaching levels of availability of 99.9999%.
Provides the facility with greater security, as it is a much more
competitive solution than the traditional paralleling of UPSs.
Failure of 1 module Failure of 2 module
Predictive maintenance
Continuous surveillance
(1)
Equipment is permanently monitored through its standard integration
in Salicru’s Nimbus-cloud.
It allows a continuous analysis of the level of protection provided.
(1) For SLC ADAPT2 models
The status of the main components can be viewed through the LCD
display.
Facilitates maintenance of faulty components or modules.
Cold-start battery
(1)
Remote maintenance
(1)
There are multiple remote maintenance options, through connection
to Nimbus Services, both in modalities, schedules and response times.
It allows immediate actions in case of incidents or advances on
anomalous situations.
SALICRU SERVICE
(1) For SLC ADAPT2 models
System start-up through batteries when the mains supply is
unavailable.
Ensures power supply to loads in situations of high criticality.
(1) Except SLC Adapt 2 cabinets with 10 or 15 kW modules
4
Reliability
Totally independent modules
Each module incorporates a filter, control, rectifier, battery charger,
inverter system and hybrid bypass.
Ease of load distribution, battery charging and maintenance operations.
Input
Output to
critical loads
POWER MODULE
BATTERIES
VFI double-conversion technology
Double conversion between input and output, AC/DC + DC/AC,
providing a clean, stable and reliable voltage at output.
Protects the load from all electrical mains disturbances and supplies
it with the highest quality voltage.
RECTIFIER INVERTER
DOUBLE CONVERSION
Centralised-hybrid bypass system
Each cabinet incorporates a static bypass and a maintenance bypass
(1)
appropriate for the total power that it can assume.
Redundant fans
System of redundant fans with separate air flow circuits in each
power module’s rectifier and inverter systems.
Redundant security in one of the most necessary elements for keeping
the modules in optimum operating conditions.
Standardised design
Highly-controlled module electronics design and serial production,
thereby reducing manufacturing faults.
Equipped for expansion of the total number of power modules without
the need to reconfigure the cabinet every time the power is changed.
INPUT
BYPASS
INPUT UPS
(1) Optional for systems with 10
and 15 kW modules.
UPS MODULE
UPS MODULE
UPS MODULE
MANUAL BYPASS
BYPASS
OUTPUT
BATTERIES
Increases mean time between failures (MTBF).
SALICRU experience +55 years
Know-how in electrical continuity and protection solutions
accumulated over 55 years of Salicru history.
More than 900,000 UPSs sold in more than 130 countries, representing
a total power equivalent to more than 5 million protected computers.
5
Loading...