Saeco 016 E, TYPE SUP 016 E, ROYAL PROFESSIONAL SUP 016 E, ROYAL PROFESSIONAL TYPE SUP 016, ROYAL User Manual
Page 1
HOUSEHOLD USE ONLY
STAMPATO SU CARTA RICICLATA. NESSUN ALBERO E' STATO ABBATTUTO PER PRODURRE QUESTO MANUALE
Cod. 0334.951 - Ed.03 10/00
TYPE SUP 016 E
We congratulate for having bought this top-quality espresso
machine and thank you for choosing Saeco.
Before operating the machine, we recommend to read the
following instructions thouroughly which explain how to use,
clean and maintain the machine.
•
User's and maintenance booklet
P R O F E S S I O N A L
OY L
Page 2
25
3
29
27
26
4
9
8
7
6
5
28
11 13
Aufheizen...
1410 12
15
16
17
18
21
22
19
20
23
1
24
23
Page 3
45
30
32
34
2
3
4
Aufheizen...
31
5
7
6
33
+
-
35
36
41
44
46
42
43
45
47
7
6
5
4
3
2
1
7
6
5
4
3
2
1
37
39
38
40
48
50
49
7
6
5
4
3
2
1
51
7
6
5
4
3
2
1
7
6
5
4
3
2
1
7
6
5
4
3
2
1
52
Page 4
80 81
DESCRIPTION OF SYMBOLS
TECHNICA L DA T A
How to use the instructions
These instructions cannot anticipate every possible
use of the machine.
For further information or questions concerning
specific situations or problems, please contact
the local dealer or manufacturer directly.
The warning triangle shows all important safety
indications to ensure the user’s safety.
The non-observance of said instructions may
cause serious injuries!
The first cover page of the manual shows figures
relevant to the text. Thus, keep it open while
reading the instructions.
SAVE THESE INSTRUCTIONS
The lightni ng flash with arrow head symbol, w ithin
an equilateral triangle, is intended to alert the user
to the presence of unisulated «dangerous voltage»
within the product‘s enclosure that may be of
sufficient magnitude to constitute a risk of fire or
electric shock to persons.
Save these instructions carefully and
make sure to hand them to other
users.
B
Reference to figures, parts of the machine and
control elements are given by numbers or letters,
as figure B exemplifies.
The exclam ation point wit hin an equi lateral t riangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Voltage rating see rating plate on the back of the machine
Nominal power see rating plate on the back of the machine
Dimensions (length x width x height) approx. 465 x 380 x 395 mm
Machine case metal and plastic material
Weight approx. 16 kg
Cable length approx. 1.2 m
System free flow thermal cut-out, alternating piston pump
Temperature control electronic
Coffee grinder adjustment grinding adjustment device
Coffee grounds ejection automatic
Ground coffee dosage coffee releasing device
Cup programming 0-250 ml approx.
Water tank removable, transparent tank
Water regulation electronic, continuous
Capacity - water tank approx. 2.4 litres
- bean coffee container 300g bean coffee
Steam/hot water dispensing tube adjustable, supplied with burn protection
Steam/hot water dispensing adjustable, continuous
Heating time approx. 2 min.
Brewing time - espresso coffee approx. 20s/cup
- coffee approx. 30s/cup
- hot water approx. 60s/cup
- milk (cappuccino) approx. 60-90s cream/cup
Overheating protection incorporated
Insulation protection range I
Approvals see rating plate on the back of the machine
In compliance with EN regulation
Warranty
EN 60335-2-15(96) - EN 60335-2-14(96) - EN 55014
in compliance with the warranty certificate enclosed herein
Table of contents
Page
81 Technical data
83 Safety rules
85 Machine controls and parts
85 Description of the control panel
86 Unpacking/Installation
86 Power supply connection
86 Starting and use
87 Drainage
Page
87 Programming the machine
93 Recommendation
94 Grind adjustment
94 Brewing
96 Incorporated Safety Devices
97 Cleaning and maintenance operations
99 Descaling
103 Troubleshooting
Accessories (included in the machine price)
Measuring spoon
Central unit key
Cleaning brush
Water hardness detecting strips
The manufacturer reserves the right to make improvements to the appliance due to technological
advancement.
Page 5
82 83
41
44
46
48
50
42
43
Electrical parts should never be in
45
contact with water: danger of shortcircuit! Steam and hot water may
cause burns. Never direct steam or
water jets towards the body; special
attention must be paid when touching
the steam/hot water spout and the
47
7
6
5
4
3
2
1
49
7
6
5
4
3
2
1
7
6
5
4
3
2
1
7
6
5
4
3
2
1
heating plate: danger of burns!
This machine must be used exclusively
for the purposes it has been
manufactured.
Do not make technical changes for any reason
whatsoever; any improper use is forbidden, due
to the risks which might occur!
Warnings
The machine shall only be used by adults and
51
7
6
5
4
3
2
1
52
7
6
5
4
3
2
1
properly instructed persons.
Voltage
Never touch parts under current! They might
cause electric shocks, serious injuries and death.
The machine must be connected to a socket with
suitable voltage. Voltage must correspond to the
voltage shown on the appliance rating plate.
A
Power cord
Never use the machine with a defective power
cord. Replace defective power cords and plugs,
contacting authorised personnel . Do not extend
the power cord around corners, sharp edges or
over hot parts and protect it from oil. Do not shift
or move the machine by pulling its power cord.
Do not unplug the machine by pulling the power
cord and never touch it with wet hands. Make
sure the power cord does not hang from tables
or shelves.
B
Keep children away
Do not allow children to play with the machine.
Children are not aware of the potential danger
caused by electric appliances.
SAFETY RULES
Positioning
Place the machine on a plane surface, where
nobody can turn it upside down or be hurt. Hot
water or overheated steam might escape from
the machine: danger of burns! Never use the
coffee machine outdoors or inside rooms with
low temperature conditions. Do not place the
machine on hot surfaces or in the proximity of
open flames to avoid possible damages of the
case.
C
Danger of burns
Do not direct the overheated steam or hot water
jet towards you or other people. Do not touch hot
surfaces, such as the steam/hot water spout.
D
Necessary space
For a proper operation of the machine it is
advisable to keep to the following indications:
- choose a levelled surface
- choose a properly lit and hygienic room
provided with accessible sockets
- leave a minimum distance of 100 mm between
the machine and the wall
E
Cleaning
Before cleaning the machine, make sure to
switch off all keys and unplug the machine. Wait
until the machine cools down. Never plunge the
machine into water! Do not tamper with the inner
parts of the machine and never open the machine.
Repair/maintenance
In case of defect or suspected damage following
a fall, unplug the machine immediately. Never
use a defective appliance. Only skilled personnel
are authorised to carry out repairs. The
manufacturer declines any liability whatsoever,
should repairs fail to be carried out by authorised
personnel.
In case of fires, use carbon dioxide (CO2)
extinguishers. Never use water or powder
extinguishers.
Page 6
85 86
MACHIN E CONT ROLS AND PARTS
INSTALLATION
1 Coffee grounds container
2 Drip tray
3 Cup holder surface
4 Main switch
5 Power cord
6 Coffee dispensing unit
7 Steam/hot water spout with
burn-protection
8 Control panel
9 Steam knob
10 Cup heating plate
11 Water tank
12 Water tank cover
13 Water level
14 Pre-ground coffee container with cover
15 Coffee bean container cover
Description of the control panel
Digital display
16 Coffee bean container
17 Grind adjustment lever
18 Coffee dosage adjustment lever
19 Service door
20 Filling funnel
21 Handle for assembling and disassembling
of central unit
22 Central unit
23 Coffee rest drawer
24 Swivel
25 Cappuccinatore
26 Suction pipe
27 Dispenser
28 Cappuccinatore adjusting valve
29 Cappuccinatore cover
Unpacking/installation
Standard packing is strong enough to protect the
machine during mail shipping. Keep this package
to return the machine to the manufacturer,
whenever necessary.
Before installing the machine, keep to the safety
indications at page 83.
Whenever possible, use the machine with swivel
(24). When installing the machine, make sure
the swivel is always fitted in the provided area on
the lower side of the machine.
Power supply connection
Warning: electric current may causedeath!
Always keep to safety rules.
The coffee machine must be connected to an
adequate socket. Voltage must suit to the voltage
specified on the appliance rating plate.
Starting and use
Parts under current shall never be in
contact with water: danger of shortcircuit! Overheated steam and hot
water may cause burns. Do not direct
steam or water jet towards the body;
furthermore, great attention must be
given when touching either the steam/
hot water spout or the heating plate:
danger of burns!
Never use the machine without wateror coffee
beans.
Remove measuring spoon, brush and the central
unit key from the coffee grounds container (1)
and keep them within reach.
Unwind the power cord (5) from the rear side of
the machine.
Standby switch:
energy saving function on/off
Selection key for 1 or 2 cups of tall coffee or key
“
” in the programming mode
Selection key for 1 or 2 cups of regular coffee
or key “
Selection key for 1 or 2 cups of espresso coffee
or “ESC” in the programming mode
Pre-ground coffee selection button or “ENT” in the programming mode
Cappuccino selection key
Hot water on/off key
” in the programming mode
WARMING UP......
............................
............................
ESC
............................
ENT
............................
Never use defective power cords! Defective
power cords and plugs must be replaced by an
authorised personnel.
Should an extension cord be used, check its
perfect conditions. The extension cord must have
a minimum section of 1 mm
supplied with a three-pole plug/socket.
2
and must be
30
Remove the cover (15) and fill the container with
coffee beans (300 g approx.), then, replace the
cover. Adjust grinding by means of the grind
adjustment lever (17), positioning it on point “5”
of the scale.
Never fill the coffee bean container with other
products since they might damage the machine!
Before filling the container with coffeebeans,
make sure the pre-ground coffee container (14)
is closed to prevent coffee beans from falling into
it. They might damage the machine!
Page 7
87
DRAINAGE / PROGRAMMING THE MACHINE
88
PROGRAMMING THE MACHINE
Remove water tank (11) from the machine,
remove its cover (12) and fill it with cold water
(approx. 2.4l). A valve on the tank bottom
prevents water from escaping.
Before installing the water tank in the
machine, make sure the coffee bean
container cover is properly fitted.
31
Install the water tank, slightly pressing over it to
fit the valve which will open automatically.
Do not fill the tank with an excessive quantity of
water.
Always fill the tank with fresh water only: hot
water as well as other fluids might damage the
tank. Never use carbon dioxide added water.
Do not switch on the machine on if the water tank
is empty: always make sure there is enough
water in the tank!
Connect the plug to the socket and press the main
switch. The following message will be displayed:
"WARNIN G UP... ... "
Should
"ENERGY "
"SAVING "
be displayed, press button “Standby” to
disactivate the energy saving mode.
Drainage
Direct the steam/hot water spout on the drip tray
(2). Place a cup or another suitable container
under the dispensing tube, then turn the steam/
hot water knob counterclockwise. The pump
starts automatically. Wait until a regular water jet
is obtained, then close the knob. The machine is
now drained and ready to work.
The following message will be displayed:
"SELECT PRODUC T "
"READY FOR USE "
Important: It is advisable to drain the
machine before the first start, after a
prolonged period the machine has not
been used or whenever the water
tank has been completely emptied.
Furthermore, should the pump be defective, the
display shows:
"VENTIL ATE "
Programming the machine
32
To enter the programming mode, press the key
ENT (
is on and keep it pressed until the first two lines
of the programming mode are displayed:
pre-ground coffee) when the machine
"LANGUA GE "
"RINSIN G "
At the end of the line a blinking asterisk is
displayed, which can be moved up and down
with the keys
If the asterisk is on the first menu, press
to move it on the second menu and vice versa.
The display shows the following sequence of
(tall and regular coffee).
button
messages :
LANGUAGE PROGR. H. WATER
RINSING PROG. CAPPUC.
WATER HARDN. TOTAL COFFEE
CUP HEATER DESCALING
TEMP. L. COFFEE SIGN. DESCAL.
TEMP. COFFEE TIMER
TEMP. S. COFFEE VENDING
PREBREWING RINSING CYCLE
PREGRINDING
In order to exit from the program mode, press the
ESC key (
again
Selecting single menus
Select the different menu items by means of the
keys
selected item. It is possible to modify the selected
figures in a menu item using the keys
ENT memorizes the selected options (for instance
“ON” for the cup heating plate).
Should you accidentally change some data,
press ESC (
saving the new options which were selected
accidentally.
Language selection
Move the asterisk to the menu item
“LANGUAGE” using the keys
ENT to activate this item. The following message
will be displayed:
). The machine is in normal mode
. The key ENT allows you to activate the
. The key
) to leave the menu item without
. Press
"LANGUA GE "
"ENGLIS H "
The keys allow you to change the set options :
“DEUTSCH”, “ITALIANO”, “FRANÇAIS”,
“ENGLISH”, “ESPAÑOL ” or “ PORTUGUES”.
Rinsing cycle function
If the rinsing cycle function is activated, the
machine that is started after a period of inactivity
starts a water rinsing cycle to the coffee dispensing
units automatically.
Move the asterisk to the menu item RINSING
CYCLE using the keys
activate it.
The display shows:
and press ENT to
"RINSIN G "
"ON "
You can modify the chosen item with the key
: on, off.
Water hardness adjustment
In order to adjust the water hardness, it is necessary
to test the water using the strip supplied with the
machine. Dip the strip into the water for a second,
shake off excess water gently, wait approx. 1
minute and read the results.
Move the asterisk at the end of the line to the
menu item “WATER HARDN.” using the keys
and select it by means of the ENT
button.
The following message will be displayed:
"WATER HARDN. "
"HARDNE SS 3 "
The keys allow you to change the set
options:
HARDNESS 1
(very soft water)
HARDNESS 2
Hardness 4
Sehr weiches Wasser
Hardness 3
Weiches Wasser
Hardness 2
Mittleres Wasser
Hardness 1
Hartes Wasser
(soft water)
HARDNESS 3
(medium water)
HARDNESS 4
(hard water)
Page 8
89
PROGRAMMING THE MACHINE
90
PROGRAMMING THE MACHINE
Cup heating plate connection
Royal Professional is equipped with a useful cup
heating plate which can be disconnected, if
required.
Press keys
“CUP HEATER”. Press ENT to activate this
function.
The following message will be displayed:
to move the asterisk to item
"CUP HE ATER "
"ON "
The keys allow you to change the set
options “ON” or “OFF”.
Temperature selection
With Royal Professional a precise adjustment of
the coffee temperature can be executed. Move
the asterisk at the end of the line to the menu items
“Temp. l. coffee”, “Temp. coffee” or
“Temp. s. coffee ” and select it by means of
the ENT key.
Depending on the selection, the following
messages will be displayed:
"TEMP. L. COFF EE "
"MEDIUM "
"TEMP. COFFEE "
"MEDIUM "
"TEMP. S. COFF EE "
The keys allow you to change the set options
“Minimum”, “low”, “medium”, “high” or
“maximum”.
Pre-brewing function
As soon as the coffee has been moistened, the
pump stops for a while in order to allow a better
utilization of the coffee powder.
Move the asterisk at the end of the line to the
menu item “PREBREWING” and select it by
means of the ENT key.
The following message will be displayed:
"PREBRE WING "
"ON "
The keys allow you to change the set
options “ON”, “OFF”,“LONG” (in the latter
case the pump stop is longer).
Pregrinding function
By activating this function, grinding occurs every
time the doser is empty. So a ground coffee
portion is always ready in the doser, allowing a
time saving whenever the machine is often used.
This function is not recommended in all other
cases, because fresh ground coffee is by far
better.
Press keys
“PREGRINDING”. Press ENT to activate this
function.
The following message is displayed:
to move the asterisk to item
"PREGRI NDING "
"ON "
The keys allow you to change the set
options “ON”, “OFF”.
Hot water programming
Whenever this function is enabled, the selected
water amount is constantly dispensed. On the
contrary, whenever this function is disabled hot
water is dispensed until the user stops the
dispensing. Hot water amount can only
be programmed with programming
mode enabled.
- “PROG. H. WATER ”. Press ENT to activate
this function.
The following message will be displayed:
"PROG. H. WATE R "
"ON "
The keys allow you to change the set
options: “ON”, “OFF”.
Cappuccino programming
Whenever this function is enabled, the same
amount of cappuccino is constantly dispensed.
On the contrary, whenever this function is disabled,
cappuccino is brewed until the user stops the
dispensing. Cappuccino amount can only
be programmed with programming
mode enabled.
Press keys
“PROG.CAPUC.”. Press ENT to activate this
function:
The following message will be displayed:
to move the asterisk to item
"PROG. CAPUC. "
"ON "
The keys allow you to change the set
options: “ON”, “OFF”.
Coffee counter
Press keys
“TOTAL COFFEE ” and select it by means of the
ENT key. The following message will be
displayed:
to move the asterisk to item
"TOTAL COFFEE "
" 12 34... "
This value cannot be modified. Quit the menu by
means of the ENT or ESC keys.
Descaling
Move the asterisk at the end of the line to menu
item “Descaling” and select it by means of the
ENT key.
The following message will be displayed:
"DESCAL ING "
For descaling procedure, see page 85.
Timer
The timer enables the automatic switching off of
the machine after a preset period, which can be
set from 15 minutes to 12 hours after last
dispensing. If after a few seconds coffee is
brewed again, the timer is reset. If the value set
is 0:00, the timer function is not activated and
the machine does not switch off.
Move the asterisk at the end of the line to menu
item “Timer” by means of the keys
Press ENT to select this item.
The following message will be displayed:
.
"STANDB Y "
"AFTER 0: 00"
By means of the same keys , select the
suitable time and confirm the value through ENT
button.
When the selected time is over the following
message is displayed:
"ENERGY "
"SAVING "
The machine stops and can be switched on
again by means of button
Vending functions
Royal Professional is equipped with a counter
allowing the machine statistic analysis while
detecting the different dispensing operations. It is
also equipped with another counter which is
able to stop the dispensing operations after a
certain number. These functions are protected by
a special access code.
“standby”.
Page 9
91 92
PROGRAMMING THE MACHINE PROGRAMMING THE MACHINE
By means of keys move the asterisk to
item “VENDING” and select it through the
ENT key. From the displayed submenu it is
possible to select one of the following items by
means of the same keys
if the hot water selection key
submenu can be quit.
The following messages will be displayed:
. On the contrary,
is pressed, the
"CODE "
" ** **"
"1 LARG E COFFE E "
"TOTAL 12 34.... "
"1 COFF EE "
"TOTAL 12 34.... "
"1 SMAL L COFFE E "
"TOTAL 12 34.... "
"HOT WA TER "
"TOTAL 12 34.... "
"COUNTE R "
"LOCKIN G:12 34.... "
"COUNTE R "
"CYCLES 0 "
Code programming
A code protects the access to the machine
counters; enter it for each programming section
and before carrying out any modification. As
soon as the code is entered, modifications can
be carried out without entering it again as long
as the programming function is enabled.
The machine is not supplied with a code. Keep
to the following indications for code
programming:
By means of keys
item “VENDING” and select it through the ENT
move the asterisk to
key. The following message will be displayed:
"CODE "
" ** **"
The following message will be displayed:
"CHANGE CODE "
" 0... "
By means of keys enter the number to be set on
the first character and confirm the selection
through the ENT key. The entered number is
saved and the cursor moves automatically to the
following character.
After having entered the complete new code, it
is necessary to save it.
The following message will be displayed:
"NEW CO DE? "
"SAVE N O "
By means of keys the code can be saved
or not saved: SI or NO.
Code entering
To enter the code, press keys
the asterisk to the counter to be changed; select
it through the ENT button.
The following message will be displayed:
and move
"CODE?? "
Enter the number to be set on the first character by
means of keys
ENT. The entered number is then saved and the
cursor moves automatically to the following character.
If a wrong code has been entered, the following
message will be displayed for about two seconds:
and confirm the selection with
"CODE F AULTY "
After having entered three wrong codes, the
entering procedure is not allowed any longer.
Counter modification
Large coffee counter
"1 LARG E COFFE E "
"TOTAL "
The counter shows the large coffee amount
dispensed from the last reset.
From the VENDING menu, move the asterisk to the
LARGE COFFEE menu by means of keys
confirm the selection with button ENT.
By means of the same keys
to modify the selected value (to reset the counter,
for example). Use the ENT button to save a new
value. Press the ESC button to stop the new value
entering procedure and, as a result, the former
counter setting shall be considered.
Coffee counter
it is possible
"1 COFF EE "
"TOTAL "
The counter shows the regular coffee amount
dispensed from the last reset.
From the VENDING menu, move the asterisk to
the COFFEE menu by means of keys
confirm the selection through ENT.
By means of the same keys
to modify the selected value (to reset the counter,
for example). Press ENT to save a new value.
On the contrary, by pressing ESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Small coffee counter
, it is possible
"1 SMAL L COFFE E "
"TOTAL "
The counter shows the small coffee amount
dispensed from the last reset.
From the VENDING menu, move the asterisk to
the SMALL COFFEE menu by means of
keys ; confirm the selection through ENT.
By means of the same keys
to modify the selected value (to reset the counter,
for example). Press ENT to save a new value.
On the contrary, by pressing ESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
;
Hot water dispensing counter
, it is possible
"HOT WA TER "
The counter shows the hot water amount (in ml)
dispensed from the last reset.
From the VENDING menu, move the asterisk to
the HOT WATER menu by means of
keys
By means of the same keys
to modify the selected value (to reset the counter,
for example). Press ENT to save a new value.
On the contrary, by pressing ESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
;
Counter
; confirm the selection through ENT.
, it is possible
"COUNTE R "
After a certain number of cycles, this function
allows to stop the coffee dispensing (excluding
hot water, steam and cappuccino dispensing
operations). It can also be used, for example, to
program the machine servicing.
If the 0 value is set, the function is disabled.
From the VENDING menu, move the asterisk to
the COUNTER menu by means of
keys
ENT.
Press the same keys to modify the selected value
(for example to set a new servicing limit). Through
and confirm the selection through
Page 10
RECOMMENDATIONS BREWING
9493
ENT a new value can be saved. On the
contrary, by pressing ESC the new value entering
is stopped and, as a result, the former counter
setting shall be considered.
When the set limit has been reached, the coffee
dispensing stops and the following two messages
are displayed:
"COFFEE DISPEN S. "
"BLOCKE D "
"SELECT PRODUC T "
"READY FOR USE "
Reset the counters by pressing the cappuccino
selection key
Washing cycle
This appliance is equipped with a rinsing cycle
program for the usual, daily and weekly rinsing.
If regularly used, this program effectively eliminates the greasiness of coffee in inaccessible
parts and avoids alterations in the taste of
coffee.
Depending on the way the appliance is used, it
is advisable to rinse it every month or after max.
250 cups of coffee. The rinsing cycle lasts about
5 minutes, and it is divided into 4 cycles,
including the rinsing with cold water. Each cycle
is followed by a short pause of about 40
seconds.
Never stop the rinsing cycle.
Important: before starting the rinsing cycle,
always fill completely the water tank and put a
capacious container (min. 1 litre) under the
coffee dispensing unit, which is height-adjustable and can be removed for cleaning.
.
The rinsing cycle needs about 1 litre of water
(including final rinsing). From time to time, empty
the water tank.
By using the keys
menu item WASHING CYCLE. To enable this
menu item use the ENT key.
The following message appears on the display:
move the asterisk to the
"WASCHI NG CYCL E "
This function starts the rinsing cycle with water of
those parts concerned with the coffee dispensing. When the rinsing cycle ends, the following
message appears on the display:
"SELECT PRODUC T "
"READY FOR USE "
Dosage of ground coffee
33
The coffee do sage adj ustm ent lever (18 ) allows the
selection of the grinding coffee amount from 6 to 9
grams. Place lever (18) on the required position.
RECOMMENDATIONS
Prolonged idleness
If the machine hasn’t been used for a prolonged
period, it is advisable for hygienic reasons to run
a rinse cycle through the machine.
Place a cup under the steam/hot water spout (7)
and fill it with water by operating the hot water
knob.
Preheating cups
Cups may be preheated by placing them on the
special cup heating plate.
Temperature led
When starting the machine, the following
message is displayed:
"WARMIN G UP... ... "
As soon as the operating temperature has been
reached, the following message is displayed:
"SELECT PRODUC T "
"READY FOR USE "
Empty coffee bean container
When coffee beans run out, the coffee grinder
stops and the following message is displayed:
"COF. BE ANS EMP TY "
Fill the container and restart the cycle.
Empty water tank
When water runs out, the program stops
automatically and the following message is
displayed:
"WATERT ANK EMP TY "
Fill the tank and restart the cycle.
Grounds container warning light
As soon as there are 30 grounds in the container,
the following message is displayed:
"DREGDR AWER FU LL "
"READY FOR USE "
The machine does not stop: remove the grounds
container and empty it.
Grind adjustment
If the coffee flows too quickly (coarse grind) or too
slowly (fine grind) into the cup, adjust coffee grinder.
The recommended grind level is position 5.
Should grinding be too coarse, adjust it on a
lower value (e.g. from 5 to 3). On the contrary,
should grinding be too fine, adjust it on a higher
value (e.g. from 5 to 7).
Adjust the grind level only when the coffee
grinder is running. Avoid any extreme adjustment
(for instance on position 1) whenever possible.
It is preferable to try another coffee blend, since
not all coffee blends are suitable.
Coffee blends
Make sure coffee is fresh. An espresso roast is
preferable.
In order to obtain a strong and aromatic espresso coffee, use special blends suitable for espresso coffee machines and special cups with thick
sides.
Keep coffee in a cool place, in an hermetically
sealed container.
Operation time
The machine may be kept on all day long.
However, in case of a prolonged period of
idleness, it is advisable to enable the energy
saving function by pressing the standby
switch. If the timer is properly programmed, this
operation is automatic: for this purpose, see
page 88.
In case of a prolonged period of idleness, it is
advised to switch the main switch (4) off; once
switched on again, the machine will be ready
to be used within two minutes.
Switching off the machine
Switch the machine off only after the coffee cycle
has been concluded.
BREWING
Cup level filling
This machine allows the precise dosage of the
Page 11
95
BREWING
96
SAFETY DEVICES
coffee quantity, according to the cup dimension.
The desired quantity
through the selection keys . The relevant messages
will be displayed.
To set the quantity of coffee to be dispensed, it
is necessary to press the relevant selection key
till the desired quantity of coffee is obtained
(max. 250 ml approx.).
During this operation, the following message is
displayed:
can be selected
"1 SMAL L COFFE E "
"PROGR. QUANTI TY "
The machine considers automatically the
necessary amounts to brew two cups of coffee.
Attention! If the pre-brewing function is enabled
during the cups dosage adjustment, keep the
selected key pressed even during the pump stop
until the desired amount is reached.
Double quantity of coffee or 2 cups of
coffee
By pressing one of the three selection keys twice,
before coffee dispensing begins, the machine
will brew a double portion of coffee.
Coffee grinding
34
This machine grinds a portion of fresh coffee for
each cup; for two cups, it grinds two portions of
coffee, one after the other, thus ensuring optimum
coffee quality.
Adjust the grinding degree according to the
instructions mentioned at page 90.
Adjust the grinding degree only when the coffee
grinder is running.
Coffee dispensing
Place one or two preheated cups on the cupholder
grill (3) under the dispenser (6). By pressing the
relevant selection key, the machine will
automatically dispense the selected coffee.
Dispensing may be interrupted by pressing one
of the coffee selection keys, if an excessive water
amount has been selected. Should you interrupt
the coffee flow after the first of two coffees, the
second is not dispensed.
Pre-ground coffee
Make sure to use pre-ground coffee only (medium
ground). Never use whole beans or soluble
coffee.
Right before brewing coffee, fill the container
with freshly ground coffee. For best results, make
sure coffee blend is fresh.
Remember that ground coffee ages soon, thus
losing its quality!
35
Important!
Use the measuring spoon supplied to fill the
container (14) with a single portion of ground
coffee! Use a full measure only.
To dispense coffee, press pre-ground coffee button
and the desired selection key (large coffee,
coffee, small coffee) to obtain a cup of coffee.
Important! This function does not allow the
double coffee cycle.
Dispensing may be interrupted by pressing one
of the coffee selection keys, if an excessive water
amount has been selected.
Hot water dispensing
Hot water dispensing is accomplished through
an independent water circuit which ensures the
correct temperature and supplies tasteless hot
water to be used for tea, soup, etc.
Press the hot water key, the display will show:
"WATER DISPENSING "
During hot water dispensing, only the
programmed amount is dispensed if the
corresponding programming is enabled. On the
contrary, dispensing should be stopped by
pressing again the selection key when the desired
amount is reached.
To program the hot water amount, it is necessary
to keep the corresponding selection key pressed
till the desired amount is reached.
Attention: hot water can only be
programmed if the corresponding
programming function is enabled (see
page 87).
During the programming phase, the following
message will be displayed:
"HOT WA TER "
"PROGR. QUANTI TY "
36
Place a glass or cup under the steam/hot water
spout (7), then press the hot water selection key.
Hot water will be automatically dispensed.
Steam dispensing
To heat milk or other drinks.
Always clean the spout with a damp cloth soon
after the use; otherwise, it might be difficult to
remove milk residues.
Turn the steam knob (9), the display will show:
"STEAM "
Direct steam/hot water spout (7) on cup holder
grill (3) and slightly open knob (9), turning it
counterclockwise.
Wait until the remaining water has flown out of
the spout. Then, move the spout outwards and
plunge it deeply into the fluid to be heated.
37
Slowly open the steam/hot water knob and heat
the fluid, with a circular movement from the
bottom to the top.
When the fluid has reached the desired temperature, close the knob and immediately clean the
spout with a damp cloth.
Attention: the spout is hot, it may cause burns!
Cappuccino
Through the special Cappuccinatore, this
machine can brew a real cappuccino without
any problem.
Press the Cappuccino key, the display will show:
"CAPPUC CINO "
INCORPORATED
SAFETY DEVICES
During the cappuccino dispensing, only the
programmed amount is dispensed if the
corresponding programming is enabled. On the
contrary, dispensing should be stopped by
pressing again the selection key when the desired
cappuccino amount has been reached.
To program the cappuccino amount, it is
necessary to keep the corresponding selection
Page 12
97
CLEANING AND MAINTENANCE O P ERAT I ONS
98
CLEANING AND MAINTENANCE O P ERAT I ONS
key pressed till the desired amount is reached.
Attention: cappuccino amount can only
be programmed if the corresponding
programming function is enabled (see
page 87).
38
For cappuccino dispensing, fit suction pipe (26) of
the Cappuccinatore (25) in a milk container or in
another container. To prevent milk container
deformation, pierce it on the top to allow air entry.
Place the cup under dispenser (27) and press the
cappuccino selection key.
Cappuccino dispensing can be adjusted by turning
the special Cappuccinatore adjustment valve (28).
Note: it is suggested to use milk with low fat
amounts (1.5%).
For a better cappuccino dispensing, do not
activate the steam (9).
Cappuccinatore cleaning
Let the Cappuccinatore drain a full water container
after each cappuccino dispensing: in this way,
the device will be perfectly cleaned.
Incorporated safety devices
Automatic off
Should the service door be open, the machine
automatically switches off. If the central unit is not
mounted, only water and steam can be
dispensed.
Electronic grinding time control
As soon as the coffee bean container is empty,
grinding automatically stops after 20 seconds
approx. Fill the container with coffee beans, as
shown at page 86.
checked by a special water level indicator (73).
Fill the tank according to the procedure shown at
page 86.
Electronic temperature adjustment
Said adjustment controls the correct temperature to
brew coffee and to dispense hot water and steam.
Coffee brewing is automatically interrupted should
the water temperature be excessive (safety
thermostat and overheating safety device
activated).
Antigravel device
Even selected coffees may contain impurities.
To avoid damages, the coffee grinder is fitted
with an antigravel device against impurities.
Should gravel end up into the coffee grinder, you
will hear a strong and characteristic noise. Stop
the machine immediately otherwise the machine
will automatically stop within 20 seconds thanks
to the special electronic protection system.
Important: Do not start the machine before
the foreign body has been removed, otherwise
the motor may be damaged. Procedures: see
page 85, points 45-49.
Cleaning and maintenance
operations
General cleaning
To ensure a good coffee quality and a longer
working life, always keep the machine clean.
Before cleaning the machine, turn off the main
switch, unplug the machine and wait until it
cools down.
Do not wash parts of the machine in the
dishwasher!
Always handdry all parts of the machine, do not
dry them in the oven or microwave oven!
Water tank, drip tray, coffee grounds
container and coffee dispenser
39
In order to keep the service area and the central
unit (22) clean, daily empty the coffee grounds
container (1), after machine use.
The water tank (11), drip tray (2), cup holder grill
(3) and coffee grounds container (1) should be
washed periodically, using a non-abrasive solvent
and drying them carefully.
40
Coffee dispenser (4) may be removed for cleaning
operations. Unloose the screws and rinse the
dispensing tube thoroughly with hot water.
From time to time, clean the machine casing with
a damp cloth and dry it.
Clean pre-ground coffee container (14) with the
aid of the brush supplied, whenever necessary.
Central unit
Clean central unit (22) whenever the coffee
bean container is filled, or at least once a week.
Switch off the machine and open service door
(19). Remove grounds coffee container (1).
Wash the central unit with hot water; do not
use any solvent.
42
Make sure there are no coffee residues on the
two steel filters: the upper filter can be removed
by unloosening and turning the plastic pin
anticlockwise using the tool supplied.
Dry thoroughly each central unit component, fit
the filter again and tighten it properly with the
screw .
43
Remove coffee rest drawer (23) and clean it,
using a non-abrasive solvent.
Clean the service area thoroughly and fit the
coffee rest drawer again.
44
By holding the central unit by its handle, slide it
back into its original position, making sure it is
correctly engaged. Then close the door. Fit the
coffee grounds container again.
When fitting the central unit, do not
press “PRESS” button: it may cause
irreparable damages to the machine!
Warning: if the central unit is not correctly
fitted, the following message will be displayed:
"BREW UNIT MISS "
The machine cannot dispense coffee.
Coffee grinder
Electronic pump control
The machine switches off automatically as soon
as the water in the tank is under the minimum level
Do not immerse the machine into water or other
fluids: it may be irreparably damaged!
41
Remove central unit (22), by holding the handle
and shortly pressing the PRESS key.
Never fill the coffee grinder with water: it may
irreparably damage the machine!
Page 13
99
DESCALING
100
DESCALING
45
Clean the coffee beans container periodically;
this operation should be accomplished
by a qualified technician! Unplug the
machine.
Empty the coffee container and unloose the two
fastening screws. Now, the container can be
removed and cleaned.
46
Carefully pull the adjustment lever upwards,
previously writing the set grinding degree.
47
Turn the adjustment ring counterclockwise, until
the blue marks coincide.
48
Now, it is possible to remove the grinding ring
from the machine, slightly pulling it upwards.
49
With the aid of a brush or a narrow vacuum hose,
clean both the gear box and the grind ring
support.
Make sure the position of the grind ring does not shift.
To reassemble the coffee grinder, carry out the
reverse sequence, making sure the adjustment
ring has not been shifted during cleaning. If that
is the case, turn it until the blue mark coincide with
one of the three notches.
Assemble the grind ring support and make sure
the blue marks coincide.
50
Turn the adjustment ring clockwise, to make the
red marks coincide.
51
Fit the adjustment lever on the ring, until it
coincides with the previously set grinding degree.
Cappuccinatore
52
To quickly clean the cappuccinatore, immerse
the suction pipe into warm water and let water
flow through it.
For a more accurate cleaning, remove the
cappuccinatore and open cover (29). Clean the
outside part with warm water and rinse it with
cleaned water.
Descaling
Warning: The descaling operations
mus be carried out when the machine
components are cold.
Descaling removes limescale from all surfaces
and holes, thus ensuring a perfect operation of
valves, heating controls and other important
parts.
Note: due to the complexity of the coffee
machine hydraulic circuit, the following descaling
cycles (automatic and standard) do not allow the
descaling of all tubes.
In fact, easily accessible components
such as the central unit (22) and its
plastic connection are excluded.
The machine must be descaled every 3-4 months,
depending on the water hardness degree.
A more frequent descaling is recommended
wherever the water hardness degree is very high.
To avoid dangerous delays to users, this machine
is supplied with a special control counter,
reminding the user to perform this operation,
according to the water hardness degree.
In this case, the following message will be
displayed:
"DESCAL E "
When this message is displayed, the machine
does not stop; however, it is suggested to
descale quickly the machine.
To cancel the message, see programming menu
indications, page 86.
The machine has been adjusted on a 25°òH
value, which causes the warning light to switch
on after 150 l approx.
Should it be necessary, the water hardness value
may be exactly programmed, following the
instructions shown at page 88.
The following adjustments are possible:
Hardness 4: high water hardness, over 29°òH
(14°dH), i.e. 80 l water approx.
Hardness 3:medium water hardness, approx.
20-29°òH (7-14°dH), approx. 150 l water
passage.
Hardness 2:soft water, approx. 12-20°òH
(4-7°dH) approx. 300 l water passage
Hardness 1:very soft water, less than 10°òH
(3°dH), approx. 500 l water passage
In hard water regions, a filter should be used
both to improve the coffee quality or to protect
the machine, thus reducing the descaling
frequency.
Note: for this purpose, use a descaling product
suitable for coffee machines.
Never use vinegar!
Descaling can be performed in two ways:
Automatic descaling
Select this mode in the programming menu (see
page 90).
By means of keys
the end of the line on the menu item Descaling
and confirm the selection with the ENT key.
The following message will be displayed:
, move the asterisk at
"DESCAL ING "
Pour a discaling solution into the water tank
(according to the instructions on the product
package). Switch the machine on the programming
mode. Place a large container under the steam/
hot water spout and open slowly the steam knob.
The automatic descaling starts: Small amounts of
descaling solution are pumped into the circuit.
Then the pump stops to let the solution take effect.
During this phase, the following message is
displayed:
"MACHIN E IS "
"DESCAL ING "
After approx. 45 minutes, when the procedure is
accomplished, the following message will be
displayed:
"DESCAL ING "
"FINISH ED "
Close the steam knob. The pump stops.
Press ENT button. A display message reminds
you to rinse away any possible descaling residues
from the machine.
"RINSE MACHINE "
Remove water tank, rinse it accurately and fill it
with fresh water. Turn the steam knob slowly on
and let all the contents come out. The following
message will be displayed:
"RINSIN G "
"FINISH ED "
Close the steam knob. Go back to programming
function by pressing the ENT key.
Note: By pressing the ESC key (hot water key),
it is possible to quit descaling procedure.
Page 14
101
DESCALING
102
DESCALING
Reset descaling message
In programming function, by pressing keys
move the asterisk till the end of the line on the menu
Sign. Descal and confirm the selection with
ENT button.
The following message will be displayed:
"RESET DESCALING "
"NO "
By means of the same keys , it is possible
to modify the value; Yes or no.
Through this reset operation, the internal counters
of the two water systems are reset and the
message DESCALE is erased.
If the function
"SIGN. DESCAL. "
is selected without the displayed message
Descale, the following message will be
displayed:
"QUANTI TY WATE R "
"NOT RE ACHED "
water.
,
Switch on the machine again and let water (2
l approx.) flow out of the steam/hot water
dispensing tube in order to rinse away residues.
Important:
A periodic descaling ensures a correct machine
functioning and avoids expensive repairs. The
machine warranty does not cover damages
occurring as a result of the non-observance of
descaling procedures, improper use and nonobservance of any other instruction contained
herein. Maintain the manufacturer’s adjustment if
the water hardness degree is not known.
Disposal
Machines which are no longer operational
should immediately be made non serviceable,
by cutting the power cord. Machines should be
delivered to a public disposal centre.
Switch off and unplug the machine if it will not be
used for long periods.
Cut the supply power cord and deliver the
machine to a public collecting point.
Troubleshooting
In case of failure, fault or suspected damage
following a fall, unplug the machine immediately.
To fix problems, follow the instructions in the
table. Otherwise contact authorised personnel.
Only skilled personnel are authorised to repair
the machine. The user might incur serious injuries
should repairs not be properly carried out.
The manufacturer declines any liability
whatsoever, should repairs fail to be carried out
according to the instructions contained in this
manual: Furthermore in these cases warranty
rights cannot be honored.
Standard descaling
Switch off the machine. Pour a descaling solution
into the water tank (according to the instructions
on the product package). Place a large container
under the steam/hot water spout (7). Switch the
machine on by pressing the main switch, press
the hot water key and let the descaling solution
in the water tank pour out of the spout for 1 minute
approx.
Press hot water key to complete the operation.
Switch the machine off and let the solution taking
effect for 5 minutes approx. Repeat this procedure two or three times, to empty the water tank.
As soon as descaling has been performed, rinse
the water tank (11) thoroughly and fill it with fresh
Should the machine not be used anymore,
switch it off and unplug it.
Keep the machine in a dry place, far from the
reach of children.
Should the machine not be used for a long
period, keep it from dust and dirt
Maintenance
Periodically check the machine working and
clean it in accordance to the instructions.
Page 15
103
TROUBLESHOOTING
84
Trouble
No message is displayed
The automatic coffee brewing
does not start
The automatic coffee brewing
does not start
Water is dispensed instead of
coffee
Steam and hot water are not
dispensed
Coffee is dispensed too quickly
Coffee is dispensed too slowly
Coffee is not hot enough
Possible causes
The machine is not getting power
The service door is open
BREW UNIT MISS.
BREW UNIT BLOCK.
WATERTANK EMPTY
COF. BEANS EMPTY
DREGDRAWER MISS.
GRINDER BLOCKED
Pre-ground coffee selection button
has been pressed, but the relevant
container is empty
The steam/hot water spout hole
is clogged
Grinding too coarse
Grinding too fine
The central unit filter is clogged
Solution
Turn the main switch on, check
plug and fuse
Close the service door is
Properly fit and lock the central
unit
Clean the central unit (see page
84)
Fill with water or coffee beans
and restart the cycle
Fit the coffee grounds container
properly
Service the coffee grinder (see
page 85)
Fill one measuring spoon of
pre-ground coffee
Clear the hole with the aid of a
thin needle
Adjust the grinder on a finer
grinding, e.g. from 5 to 3
Adjust the grinder on a coarser
grinding, e.g. from 5 to 7
Clean the filter
IMPORTANT SAFEGUARDS
When using your coffee maker, basic safety
precautions should always be followed, including the followed to reduce the risk of
fire, electric shock, and/or injury to persons
including the following:
1
● Read all instructions.
2
● Do not touch hot surfaces. Use
handles or knobs.
3
● To protect against electric shock, do
not place cord, plug or appliance in water
or other liquid.
4
● Close supervision is necessary when
any appliance is used by or near children.
5
● Unplug from the outlet when not in
use and before cleaning. Allow to cool
before putting on or taking off parts, and
before cleaning the appliance.
6
● Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions, or has been
damaged in any manner. Return appliance
to an authorised service facility for
SAVE THESE INSTRUCTIONS
examination, repair or adjustment.
7
● The use of an accessory not
evaulated for use with this appliance may
cause injuries.
8
● Do not use outdoors.
9
● Do not let cord hang over edge or
table or counter, or touch hot surfaces.
10
● Do not place on or near a hot gas
or electric burner, or in a heated oven.
11
● Always attach plug to appliance first,
then plug cord into the wall outlet. To
disconnect, turn any control to the off
position, then remove plug from wall outlet.
12
● Use this appliance only for its
intended use as described in this manual.
13
● Keep the cord away from heated
surfaces.
Coffee is not creamy enough
The machine coffee brewing is
reduced, it takes longer to heat
and the dispensing is not
sufficient
The central unit cannot be
removed
The cup has not been preheated
The coffee blend is not suitable
or is not fresh. Grinding is not
correct (too fine or too coarse)
Descaling the machine
The central unit has not been
correctly positioned
Heat the cup on the heating
plate
Try another coffee blend
Descale the machine, as
described at page 85
Switch the machine on, close
the service door, fit the coffee
grounds container and wait until
the machine resets.
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTORIZED SERVICE PERSONNEL ONLY
Loading...