MANUAL MACHINES 02 TECHNICAL SPECIFICATIONS
SAECO Page / 02
2.1. Technical specifi cations
Technical specifi cations Estrosa and Carezza
2.2. Descaling frequency
Safety system: 2 one-shot thermostats (127°C and 95°C) 1 thermal protector >
184°C
Coffee heat exchanger
output: Stainless steel
(230/120 V~) 1000 W – for coffee, hot water and steam
dispensing
Pump Ulka Type EP5/S GW approx. 13-15 bar with reciprocating piston
and 120°C cutout 48 W, 230V, 50 Hz, 120V, 60Hz 100V, 50/60 Hz
and Defond A2P03 220-240V 53W
Overpressure valve: Opening at approx. 16-18 bar
Water fi lter: In tank
Flow meter assembly Only in the single versions with the coffee amount setting
Consumption: During the heading phase of 8,2A, during the brewing phase 8,5A
Safety system: 2 one-shot thermostats 190°
Coffee heat exchanger
output: Stainless steel
1900 W 230V – for coffee, hot water and steam dispensing
Pump Ulka Type EP5/S GW approx. 13-15 bar with reciprocating piston
and 120°C cutout 48 W, 230V, 50 Hz, 120V, 60Hz 100V, 50/60 Hz
and Defond A2P03 220-240V 53W
Overpressure valve: Opening at approx. 16-18 bar
Water fi lter: In tank
Consumption: During the heading phase of 8,2A, during the brewing phase 8,5A
01
Descaling frequency
Hardness
Water hardness Without anti-scale fi lter With anti-scale fi lter
1 Soft (up to 7°dH) 240 litres (480,000 pulses) 480 litres (960,000 pulses)
2 Medium (7° - 14°dH) 120 litres (240,000 pulses) 240 litres (480,000 pulses)
3 Hard (15° - 21°dH) 60 litres (120,000 pulses) 120 litres (240,000 pulses)
4 Very hard
(over 21°dH)
30 litres (60,000 pulses) 60 litres (120,000 pulses)