Ryobi EasyEdge RLT5030SG Operator's Manual
EasyEdge™ ELECTRIC LINE TRIMMER
OPERATOR’S MANUAL
RLT5030SG
Important!
It is essential that you read the instructions in this manual before assembling and operating this
machine. Subject to technical modications.
1
ENGLISH
Your lin e tr i mme r ha s be e n en g ine e red and
manufactured to Ryobi’s high standard for dependability,
ease of operation, and operator safety. When properly
cared for, it will give you years of rugged, trouble-free
performance.
Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
INTRODUCTION
This appliance is not intended for use by persons
(including children) with reduced understanding, or lack
of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
This product has many features for making its use more
pleasant and enjoyable.
Safety, performance, and dependability have been given
top priority in the design of this product making it easy to
maintain and operate.
INTENDED USE
This grass trimmer is designed for cutting grass and
similar soft vegetation and for trimming grass edges
in private and hobby garden areas which are not
accessible with a lawn mower.
The device should not be used in public gardens, parks,
sports centres or at roadsides as well as in agriculture
and forestry.
This lawn trimmer is not recommended for cutting or
chopping:
- Hedges, shrubs, bushes or flowers.
GENERAL SAFETY RULES
WARNING:
When using electric gardening appliances, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
personal injury, including the following:
READ ALL INSTRUCTIONS
n Be familiar with the controls and proper use of the
product.
n Clear the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire or
string that can be thrown or become entangled in the
cutting line.
n Wear heavy, long trousers, boots and gloves. Do
not wear loose fitting clothing or shorts. Always wear
shoes. Do not wear jewellery of any kind.
nSe cure hair above sho u lder level to preve nt
entanglement in moving parts.
nDo not allow children or untrained individuals to use
this product.
n Keep all bystanders, especially children and pets, at
least 15 m from the operating area.
nDo not operate this product when you are tired, ill or
under the influence of alcohol, drugs or medication.
n Do not operate in poor lighting. Use the unit only in
daylight or good artificial light.
n Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of bala nce or
exposure to hazards.
nKeep all parts of your body away from moving parts.
n Inspe ct the product befo re use . Replace any
damaged parts before use.
nDo not operate the product in damp or wet locations.
nDo not use the product in the rain.
nWear safety glasses or goggles when operating this
product.
nUse the right product. Use the product for the
intended purpose only.
n Do not handle the product with wet hands.
nDo not use the product if the switch does not turn the
product on or off. A product that cannot be controlled
with the switch is dangerous and must be repaired.
nAvoid accidental starting; never carry the product
with your finger on the trigger.
nUse common sense when using this product. Stay
alert and pay attention to what you are doing.
nDo not force the product. It will do a better job with
less risk of injury when you operate it at the rate for
which it was designed.
nPull the plug out immediately if the mains or
extension lead is damaged or severed.
nDisconnect the product from the power supply when
it is not in use, before servicing and when changing
accessories.
nThe appliance is not intended for use by young
children or infirm persons without supervision.
nYoung children should be supervised to ensure that
they do not play with the appliance.
SPECIFIC SAFETY RULES
SPECIFIC TRIMMER SAFETY RULES
n
Replace the trimmer head if cracked, chipped or
damaged in any way. Be sure the trimmer head is
properly installed and securely fastened.
nMake sure all guards, deflectors and handles are
properly and securely attached.
n Use only the manufacturer’s replacement line in the
trimmer head.
n Never operate the product without the safety guard in
place and in good condition.
n Use the product for cutting grass and light weeds
only. Do not use for any other purpose.
n Before starting the product, position it so that the line
does not come in contact with anything you do not
intend to cut.
n Maintain a firm grip on both handles while trimming.
2
ENGLISH
ALWAYS KEEP THE TRIMMER HEAD BELOW
WAIST LEVEL.
n Keep the working area free from wires, stones and
debris.
n Do not cut against hard objects. This could cause
injury or damage the trimmer.
n Do not use the trimmer to cut grass which is not in
contact with the ground; for example, do not cut grass
which is on walls or rocks.
nAlways use your trimmer in an upright position.
n Keep hands away from the cutting line. Do not
attempt to remove cut material or to hold material to
be cut when the line is moving.
n Be sure to unplug the product before clearing jammed
material from the line.
n Do not grasp the line when picking up or holding the
product.
nBe cautious after turning off the product. The line
coasts after turning off the product.
nDo not switch the trimmer on in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gas and
powders.
n Do not cross roads or gravel paths with the trimmer
still running.
n Never fit metal cutting elements to the trimmer.
ELECTRICAL SAFETY RULES
n Make sure the cord is located so that it will not be
stepped on, tripped over or otherwise subjected to
damage or stress.
n Do not abuse the power cord. Never carry the product
by the cord. Never pull the plug out of the power point
by the cord. Keep the cord away from heat, oil and
sharp edges.
n For outdoors wor k use only suitably approved
extension cables with a min. Conductor cross section
of 1.0 mm2 The plug connectors must have earthing
contacts and be rain-water-proof.
n Inspect extension cords for deterioration, cuts or
cracks in the insulation. Repair or replace the cords if
any defects appear.
n A nameplate on the product indicates the unit’s
voltage. Never connect the product to an AC voltage
that differs from this voltage.
n If the power cord or extensio n cable becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
n Electrical power should be supplied via a Residual
Current Device (RCD) with a tripping current of not
more than 30 mA.
MAINTENANCE RULES
n Maintain the product with care. Follow instructions for
changing accessories. Keep the product dry, clean
and free from oil and grease.
n Unplug the product before making adjustments or
repairs.
n Do not use the product if parts have been damaged.
n Check the product regularly to make sure that it
will operate properly and per form the intended
function. Check for alignment of moving parts, binding
of moving parts, breakage of parts and any other
condition that may affect the unit operation. Inspect
the unit’s power connection. Any part that is damaged
should be properly repaired or replaced by a Ryobi
authorised service centre.
nKeep the product clean of grass clippings and other
materials that may become lodged in the cutting lines
and air vents.
n Never douse or squirt the product with water or any
other liquid. Do not use detergents or solvents. Keep
handles dry, clean and free from debris.
n After each use, clean with a soft, dry cloth
WARNING:
Before carrying out any maintenance operations,
cut off the electric power supply by disconnecting
the plug from the mains.
n If the cut-off blade is worn or breaks, have this
replaced by contacting an authorised service centre.
SERVICE RULES
n S e r vice on t h is prod u c t must b e perform e d
by qu alified repai r person nel only. Servic e or
maintenance performed by unqualified personnel
could result in injury to the user and/or damage to the
product. Such service may also void your warranty.
nUse onl y id e n tical re p l aceme n t p a r ts w hen
ser v icing the produ ct. Follow the inst r uctions
in the Maintenance section of this manual. Use of
unauthorised parts or failure to follow maintenance
instructions may create a risk of shock, serious injury
to the user and/or damage to the product. Such use
may also void your warranty.
STORAGE AND TRANSPORTATION RULES
n Stop the motor when you are waiting to cut or when
you are walking from one cutting location to another.
n Store the product inside in a dry place.
n Store the product up high or lock it up to prevent
unauthorised use or damage. Keep the product out of
the reach of children.
n Secure the product when transporting it.
n Save these instructions. Refer to them frequently
and use them to instruct others who may use this
product. If you loan someone this product, loan these
instructions also.
TRAINING
n Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
n Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations can
restrict the age of the operator.
Loading...