Ryobi DS11008 Owner's Manual

RYOBI DETAIL SANDER – MODEL NUMBER DS11008

WARNING:

The foot cover, key number 20, insulates the cap screw, key number 21, making it part of the double insulated system. Therefore, it must always be replaced when replacing parts or making repairs to this tool.

RYOBI DETAIL SANDER – MODEL NUMBER DS11008

The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your

DETAIL SANDER or when ordering repair parts.

PARTS LIST

Key Part No. Number Description Quan.

1 982600-001 DATA PLATE................................................. 1

2 990908-009 SCREW (#6-19 X 5/8 IN. PAN HD.) ............ 12

3 972031-000 HOUSING ASSEMBLY..................................1

4 968303-102 SWITCH ASSEMBLY (INC. KEY NO. 5) ....... 1

5 971443-001 SWITCH COVER........................................... 1

6 972983-002 SPHERICAL RING ........................................ 1

7 975625-001 ARM SUPPORT ............................................ 1

8 972410-001 SLEEVE BEARING........................................1

9 969808-013 MOTOR ASSEMBLY (INC. KEY NO. 8)........ 1

10 971660-001 BLACK LEAD.................................................1

11 975626-001 ARM COVER ................................................. 1

12 970777-014 CORD ASSEMBLY........................................ 1

Key Part No. Number Description Quan.

13 982692-001 DOMED LABEL ............................................. 1

14 975627-001 ARM............................................................... 1

15 975784-001 DOWEL PIN...................................................1

16 971884-000 SANDPAPER.................................................1

17 982694-001 FELT PAD.....................................................1

18 982693-001 PAD ASSEMBLY (INCLUDES KEY NO. 17). 1

19 967273-001 SCREW (#4-24 X 3/8 IN. PAN HD.) .............. 1

20 971646-001 FOOT COVER ...............................................1

21 612284-003 CAP SCREW

(#8-32 X 7/16 IN. HEX SOCKET) .................. 1

22 979860-001 RUBBER WASHER ....................................... 1

972000-876 OWNER’S MANUAL 4-01

WARNING:

IMPROPER REPAIR OF A DOUBLE INSULATED TOOL CAN RESULT IN DAMAGES TO THE DOUBLE INSULATION SYSTEM POSSIBLY CAUSING ELECTRICAL SHOCK OR ELECTROCUTION. ANY REPAIRS REQUIRING DISASSEMBLY OF YOUR TOOL REQUIRES SAFETY TESTING AND SHOULD ONLY BE PERFORMED BY A RYOBI AUTHORIZED SERVICE CENTER OR OTHER QUALIFIED SERVICE ORGANIZATION.

+ 1 hidden pages