Page 1
BCL12L1H
ORIGINAL INSTRUCTIONS
12V Lithium-Ion
Charger
Page 2
Important!
It is essential that you read the instructions in this manual before operating
this machine.
Subject to technical modications.
Page 3
Safety
SAFETY INSTRUCTIONS
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities. Do not let children play with this appliance.
Please read and observe these instructions before using
the device.
■ Before using the device check that the mains cable and
mains plug are not damaged.
■ The device must not be damp, neither should it be used
in a damp environment.
■ Do not use the device if it has suffered any heavy shock
or jolting, or is damaged in any other way.
■ Due to the heat generated during charging, the battery
charger should not be operated on a combustible
surface/in an inflammable environment.
■ Do not cover the ventilating slits.
■ Never disassemble the device yourself.
■ Pull the plug of the battery charger out of the socket
when it is not in use or when cleaning it.
■ Only use extension cable that is approved and
technically in perfect condition.
■ During operation provide sufficient ventilation.
Malfunction during charging can be caused by storing
and operating in places where the temperature exceeds
+40˚C; this should be avoided. Battery charging in
closed cupboards, near heat sources (radiators, bright
sunshine) etc., causes heat to accumulate and can
damage the device.
■ If the battery is not going to be used for a longer period,
pull the battery off the battery charger and pull out the
mains plug.
■ Protect battery contact to avoid a short circuit caused
by metallic object that can cause a fire or explosion!
■ Only charge original recommended batteries.
■ If the power cord is damaged, it must be replaced by an
Authorised Service Center in order to avoid a hazard.
MAINTENANCE
WARNING
Service, testing and repairs should only be carried out by
authorised service centre. We recommend our customer
service department or authorised service centres.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOL
Safety alert
V Volts
Direct current
Please read the instructions carefully
before starting the machine.
Recycle
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
ICONS IN THIS MANUAL
WARNING
Do not recharge primary cells (non-rechargeable).
WARNING
Mains voltage must correspond with the voltage
specications on the device.
INTENDED USE
You may use this product for charging compatible Ryobi 12
Volt Lithium-Ion battery packs.
Safety
Getting started
Information
1
Page 4
1
2
1 2
10˚C - 38˚C
Getting started
2
Page 5
LED CHARGE INDICATOR
PRODUCT SPECIFICATIONS
LED Battery pack inserted Status
ON Standby
Flash Charging
ON Fully charged
NOTE: When batteries become
fully charged, unplug the charger
from the power supply and
remove the battery pack.
OFF Defective
NOTE:
• If defective, repeat a second
time by removing and
reinstalling the battery pack. If
the LED status is still defective,
try charging a different battery.
• If a different battery charges
normally, dispose of the
defective pack.
• If a different battery also
indicates defective, the charger
may be defective.
Compatible battery pack BSPL1213
Voltage 12 V
Charger input 220V-240V, 50Hz-60Hz
AC only
Battery capacity 1.3 Ah
Charging time 60 min
Operating temperature 10°C - 38°C
Storage temperature 10°C - 25°C
Page 6
Page 7
Page 8
961067853-01
Loading...