Ryobi BCL3620 User Manual

0 (0)
Ryobi BCL3620 User Manual

BCL3620

36 VOLT

LITHIUM-ION BATTERY CHARGER

OPERATOR’S MANUAL

Important! It is essential you read the instructions in this manual before starting and operating this machine.

Subject to technical modifications.

English

intended use

This charger is only intended to charge Ryobi battery pack BPL3626, see specification table for details.

safety instructions

This appliance is not intended for use by persons (including children) who may not be completely capable, or who may lack experience, knowledge and common sense necessary to operate the appliance safely. Children should be supervised to ensure that they do not play with the appliance.

WARNING

When using the battery charger, the following basic safety precautions should be observed for protection against electric shock, danger of injury and burns.

Please read and observe these instructions before using the device.

This charger is only to be used indoor under dry conditions.

This charger is not intended to charge any other type of battery and should never be used in explosive or inflammable environments.

Non-rechargeable batteries cannot be charged with this battery charger.

To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.

Before using the device check that the mains cable and mains plug are not damaged.

The device must not be damp, and it should not be used in a damp environment.

Do not use the device if it has suffered any heavy shock or jolting, or is damaged in any other way.

Due to the heat generated during charging, the battery charger should not be operated on a combustible surface/in an inflammable environment.

Do not cover the ventilating slits.

Never disassemble the device yourself. Danger of an electric shock or fire could be caused by improper reassembly.

When the appliance is not in use and before cleaning and maintenance, unplug the appliance from the outlet.

During charging, the battery pack with charger must be placed in a well ventilated area. Malfunction during charging can be caused by storing and operating in places where the temperature exceeds +40°C; this should be avoided. Battery charging in closed cupboards, near heat sources (radiators, bright

sunshine) etc. causes heat to accumulate and can damage the device.

If the battery is not going to be used for a long period, pull the battery off the battery charger and pullout the mains plug.

Protect battery contacts to avoid a short circuit caused by a metallic object that can cause a fire or explosion!

Do not rivet or screw any name-plates or signs onto the device. The protective insulation can thereby be rendered ineffective. Adhesive labels are recommended.

If the mains cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARNING

Do not insert any object into the ventilation slots or charging connector. This can cause damage to the appliance and may increase the risk of personal injury and property damage.

WARNING

Never allow the charger to be modified in any way unless at an authorised service centre. This may increase the risk of serious personal injury or property damage.

WARNING

Before you plug in your product, make sure that the supply voltage used corresponds to that indicated on the rating plate.

assembly

See Figure 4.

Insert the provided power cord into charger socket before charging.

Description

1.BCL3620 charger

2.Charger socket

3.Indicator LED

4.Battery port

5."Key hole" hanger

6.Depress latches to remove battery pack

7.Power cord

2

English

Symbol

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

symbol designation/explanation

Precautions that involve your safety.

VVoltage

Alternating current

To reduce the risk of injury, user must read and understand user’s manual before using this product.

Class II: Protection against electric shock rely on double insulation or reinforced insulation.

Time-lag type fuse

Indoor use only

Recycle unwanted

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

SAA and C-Tick Conformity

The following signal words and meanings are intended to explain the levels of risk associated with this product.

symbol

signal

meaning

 

DANGER

Indicates an imminently hazardous situation, which, if not avoided, will

 

result in death or serious injury.

 

 

 

 

 

 

WARNING

Indicates a potentially hazardous situation, which, if not avoided, could

 

result in death or serious injury.

 

 

 

 

 

 

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may

 

result in minor or moderate injury.

 

 

 

 

 

 

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may result in

 

property damage.

 

 

 

 

 

3

Loading...
+ 4 hidden pages