RTS IFB 4030-M User Instructions
User Instructions
Innovating the Future of Global Communications
IFB 4030-M
Passive IFB beltpack with 1/4” (6.3mm) Jack
Description
The IFB 4030-M is a passive beltpack intended for use with RTS digital matrix intercom systems.
1. Controls headset/earset output audio level
2. 1/4” Monaural headset/earset output
3. XLR-3F Balanced input
Installation
1. Connect the belpack to an unused intercom system port (see cable diagram below).
2. Configure the unused intercom system polrt (via AZedit) for IFB.
3. Set the port output level (via System|Gains|Analog Input/Output Gains) to -4 dB.
4. Send the changes to the intercom.
5. Connect the headset/earset to the unit
Specications
Innovating the Future of Global Communications
Earset/Headset: 50 to 600 Ohms
Weight: 6.2oz (303g)
Headset Connectors:
Type: ¼” (6.3mm) Monaural Plug
Tip: Headset audio high
Line (Intercom) Connectors:
Type: XLR-3F
Pin 1: Not Connected
Pin 2: Intercom audio high (+)
Pin 3: Intercom audio low (-)
Sleeve: Headset audio low
Proprietary Notice
The RTS product information and design disclosed herein were originated by and are the property of Bosch Communications, Inc. Bosch reserves all
patent, propretary design, manufacturing, reproduction, use and sales rights thereto, and to any article disclosed therein, except to the extent rights are
expressly granted to others.
Copyright Notice
Copyright ©2015 by Bosch Communications, Inc. All rights reserved. Reproduction in whole or in part without prior written permission from Bosch is
prohibited.
Warranty and Service Information
RTS Intercoms .....................................................................................................................................................................www.rtsintercoms.coms/warranty
Customer Support
Technical questions should be directed to:
Customer Service Department
Bosch Security Systems, Inc.
www.rtsintercoms.com
Technical Questions EMEA
Bosch Security Systems Technical Support EMEA
www.rtsintercoms.com/contact_main.php
Disclaimer
The manufacturer of the equipment described herin makes no expressed or implied warranty with respect to anything contained in this manual and shall
not be held liable for any implied warranties of tness for a particular application or for any indirect, special, or consequential damages. The information
contained herein is subject to change without prior notice and shall not be construed as an expressed or implied commitment on the part of the manufacturer.
Order Information
4030M • 4030M • Passive IFB beltpack with ¼” (6.3mm) jack
The specication information is preliminary and is subject to change without notication.
Brand names mentioned are the property of their respective companies.
Bosch Security Systems, Inc. | 12000 Portland Avenue South | Burnsville, Minnesota 55337
Telephone: 877·863·4169 | Fax: (800) 323-0498
Form Number: F.01U.247.078 Rev 03
Date: May 2015
www.rtsintercoms.com
Loading...