VIENNA AIR PAN W/AIR TOWER
MODEL # VIAP AT
SPECIFICATIONS
The Vienna Series VIAP AT is a drop-in air pan with an air tower, which provides higher air coverage for taller product. It is cooled by circulating a curtain of refrigerated air over the product in the display area to enable precise temperature control and maximum cold transfer to the food product. Evaporator features a lift-up mechanism that allows the inner pan to be easily rinsed clean. Unit is designed to accommodate standard
hotel / foodservice pans (to be purchased by others).
30 1/2" 43 3/8" 56 1/8” 68 7/8"
27 7/8”
29 1/8”
304 Stainless Steel Exterior Adjustable Deck Pan to Convert to Slanted Display
Easy Removable Deck Pans for Cleaning Programmable Digital Refrigeration Controller Self-Contained Refrigeration with
Pull-Out Compressor Housing Forced Air Cooling System Lift-Up Evaporator
ETL Listed in Accordance with UL 471 and NSF 7 Standards Environmentally Safe Refrigerant Floor Drain Required
Remote Refrigeration
Integrations Modular Counter (Consult Factory) Sneeze Guards (Consult Factory)
Adapter Bars for Standard Full-Size Pans (Pans Not Included) Front Air Ventilation Kit for Units Against Wall
Rear Air Ventilation Kit
5 Year Compressor Warranty
*LENGTHS INCLUDE OUTSIDE FLANGES
**29 1/8” O.A. height, includes 4” height of the
air tower. Contact factory for cut out and installation information.
MODEL |
L* |
D |
H** |
PANS |
HP |
VOLT |
AMP |
PLUG |
WT |
REFRIG. |
CUT-OUT SIZE |
VIAP2-0-R-SC AT |
30 1/2 |
27 7/8 |
29 1/8 |
2 |
1/4 |
115 |
3.9 |
5-15P |
330 |
134A |
28 3/4 x 26 1/4 |
VIAP3-0-R-SC AT |
43 3/8 |
27 7/8 |
29 1/8 |
3 |
1/3 |
115 |
4.7 |
5-15P |
363 |
134A |
41 5/8 x 26 1/4 |
VIAP4-0-R-SC AT |
56 1/8 |
27 7/8 |
29 1/8 |
4 |
3/8 |
115 |
6.1 |
5-15P |
429 |
134A |
54 3/8 x 26 1/4 |
VIAP5-0-R-SC AT |
68 7/8 |
27 7/8 |
29 1/8 |
5 |
1/2 |
115 |
6.9 |
5-15P |
528 |
134A |
67 1/8 x 26 1/4 |
1.A 1” diameter drain is provided. The drain MUST be run to a floor drain AT TIME OF INSTALLATION.
2.Front and Rear ventilation louvers, each at least 25” W x 20” H, MUST be provided in the cabinet or counter and located so to provide full ventilation for the condensing unit. Refrigeration System is designed so air will flow rear to front. Unobstructed air flow must be maintained to ensure unit performance and maintain warranty.
3.RPI Merchandiser is designed for use in stores where ambient temperatures and humidity do not exceed 75 Degrees Fahrenheit and 55% R.H. Locate away from direct sunlight, rapid air currents and extreme temperature changes. Exposure to air currents from ceiling fans, air conditioning diffusers, ovens, etc. will disrupt the case air curtain and refrigerated zone. Refrigerated Displays are designed to maintain pre-chilled products.
Adding or loading warm products above 41 Degrees Fahrenheit can affect the temperature in the entire cabinet. Any adverse field conditions stated above will void warranty.
RPI in line with its policy to continually improve its products reserves the right to change materials and specifications without notice.
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055 |
v8.12 |
Loading...