Rough Country 777 User Manual

92777000
JEEP EVAP SKID
Thank you for choosing Rough Country for your suspension needs.
Rough Country recommends a certified technician install this system. In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.
PRODUCT USE INFORMATION
Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be re­sponsible for any product that is altered.
If question exist we will be happy to answer any questions concerning the design, function, and correct use of our prod­ucts by calling 1-800-222-7023.
This JK EVAP skid plate is designed to work with any JK with stock evap canister.
Kit Picture
Tools Needed
9/16” Socket/Wrench 13mm Socket/Wrench 16mm Socket
Install Instructions
1. On 2012 and newer JK’s remove the bottom bracket bolt with a 13mm socket and wrench. See Photo 1. Disconnect the evap hoses and remove the three factory bolts holding the factory mount to the frame with a 16mm socket.
2. Use the supplied 3/8” bolts, washers, and nuts to attach the mounting bracket to the evap skid plate. Tighten with a
9/16” socket and wrench. See Photo 2.
Photo 1
PHOTO 1
Photo 2 PHOTO 2
3. On 2012 and newer JK’s attach the factory bolt and nut to hold the evap canister to the skid and tighten with a 13mm socket and wrench. See Photo 3.
4. Use the supplied strap to hold the evap canister to the skid, tighten with a 9/16” socket and wrench, using the sup-
plied 3/8” bolt, washer, and nut. See Photo 4.
PHOTO 3 PHOTO 4
5. Hold the skid plate in place and secure with factory bolts. Tighten with a 16mm socket. See Photo 5.
6. Attach the factory hoses back to the canister. See Photo 6.
PHOTO 5
PHOTO 6
Thank you for purchasing a Rough Country Evap skid plate.
Loading...