Rotel RB-1080 Schematic

Quality Uncompromised

®

Technical

STEREO POWER AMPLIFIER

RB-1080

Manual

Table of Contents

Specification..................................... 1

Parts List .......................................... 2,3

Adjustment....................................... 3

Case Outlines................................... 3

Note On Safety................................. 4

PCB Assembly ................................. 4,6

Schematic Diagram.......................... 7,8

Specification

Continuous Power Output (20-20 kHz, ≤ 0.03%, 8 ohms) 200 watts/ch.

(20-20 kHz, ≤ 0.05%, 4 ohms) 300 watts/ch.
Total Harmonic Distortion (20 Hz-20 kHz, 8 ohms) ≤ 0.03%
Intermodulation Distortion (60 Hz: 7 kHz, 4:1) ≤ 0.03%
Frequency Response ≥ 10-100,000 Hz, ± 1 dB
Damping Factor (20-20,000 Hz, 8 ohms) ≥ 500
Speaker Impedance 4-16 ohms
Signal to Noise Ratio (IHF A network) 120 dB
Input Impedance/Sensitivity (RCA Inputs) 33 k Ohms/1.0 volt
(XLR Inputs) 33k Ohms/1.0 volt
Power Requirements 115 Volts, 60 Hz or

230 Volts, 50 Hz
Power Consumption 550 Watts
Dimensions (W, H, D) 440 x 127 x 385 mm

17.38 x 4.76 x 15.16” inches

Weight (net) 16.7 kg., 36.74 lb.

SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN

Serial. NO.
Begining

Y-337A-00125M/S-S

Schematic Diagram

7 8