ROTEL RB-1080 User Manual

RB 1080

High Current Two Channel Amplier

Description

The RB-1080 rests close to the pinnacle of Rotel’s two channel power amplier offerings. Power output (200 watts per

channel into 8 ohms) is extraordinary. The Rotel-made toroidal transformer feeds separate power supplies for each channel.

British BHC Slit Foil storage capacitors provide quick charge/discharge times for instantaneous response to the most

demanding signal peaks. Damping factor, at 1,000, shows this amplier’s unparalleled ability to lock onto the most difcult

speakers to precisely control diaphragm motion and give you superior sound quality. Heavy duty dual binding posts encourage

the use of the most advanced speaker cables while switchable balanced (XLR) and unbalanced (RCA) inputs provide

extraordinary system conguration exibility. Front panel heat sinks add a strikingly dramatic look. Separate inputs and

outputs for 12 volt “trigger” signals and a detachable AC cord make this amplier well suited for custom-installed systems

with total remote control capability.

Specications

Power Congurations: 2 x 200 watts

Watts/Channel:
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,

0.06% THD

THD (20-20,000Hz):
cont. rated power
one-half rated power
one watt per channel

IM Distortion (at rated ower, 60Hz:7kHz = 4:1): 0.03%, maximum

Damping Factor (8 ohms): 1000

200 watts

0.03%, maximum

0.01%, maximum

0.02%, maximum

The Rotel Co. Ltd.

10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan

Input Sens. / Impedance: 1.5V / 32 kohms

Frequency Response: 15-100 kHz (±1dB)

S/N Ratio (IHF A): 116dB

Power Consumption: 550 watts

Dimensions (W x H x D): 433 x 140 x 380mm

1

/8 x 5 1/2 x 15”

17

Front Panel Height: 127 mm, 5.0”

Weight (net): 16.7 kg / 36.8 lbs

www.rotel.com

Rotel of America

54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]

Rotel Europe

Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]