Rotel RB-1070 Brochure

RB 1070

High Current Two Channel Amplier

Description

The latest interpretation of a classic Rotel awardwinning power amplier, the RB-1070 continues the tradition of oversized

toroidal transformer and high capacity power supply. In addition, Symmetrical Signal Trace circuit topology assures the precise

interchannel timing clues necessary for pinpoint stereo reproduction. At 130 watts per channel, the RB-1070 is more than

capable of meeting the challenges of even the least efcient loudspeakers. An internal bridge option provides truly prodigious

330 watt output capability. Front panel LED status indicators show power, protection, and bridged mode for instant system

analysis. A separate input and output for 12 volt “trigger” signals and detachable AC cord increase this amplier’s exibility by

allowing total integration with even the most complex remote-controlled systems.

Specications

Power Congurations: 2 x 130 watts

Watts/Channel:
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,

0.06% THD

THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel

IM Distortion (at rated ower, 60Hz:7kHz = 4:1): 0.03%, maximum

Damping Factor (8 ohms): 500

130 watts
(bridged mono)

0.03%, maximum

0.03%, maximum

0.03%, maximum

The Rotel Co. Ltd.

10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan

Input Sens. / Impedance: 1.0V / 33 kohms

Frequency Response: 4-100kHz (=0.5dB, -3dB)

S/N Ratio (IHF A): 120dB

Power Consumption: 400 watts

Dimensions (W x H x D): 433 x 121 x 334mm

1

/8 x 4 3/4 x 13 1/8"

17

Front Panel Height: 109 mm, 4.3”

Weight (net): 10.2 kg / 22.4 lbs

www.rotel.com

Rotel of America

54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]

Rotel Europe

Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]