Rotel RB-1050 Brochure

RB 1050

High Current Two Channel Amplier

Description

Ideal for demanding custom installations, the ultrastable RB-1050 combines audiophile sound quality and “bullet-proof”

circuitry. A multi-mode amplier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity

adjustments and “auto on” signal sensing circuitry allows use with a variety of distribution devices or processors. Buffered

line level outputs allow multiple ampliers to “daisy chain” from a single source. The toroid-based power supply and high

damping factor ensure precise control of virtually all speakers. 12 volt “trigger” jacks and a detachable AC cord make this

amplier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes

for quick system analysis.

Specications

Power Congurations: 2 x 70 watts

Watts/Channel:
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,

0.06% THD

THD (20-20,000Hz):
cont. rated power
one-half rated power
one watt per channel

IM Distortion (at rated ower, 60Hz:7kHz
= 4:1):

Damping Factor (8 ohms): 500

70 watts

0.03%, maximum

0.03%, maximum

0.03%, maximum

0.03%, maximum

Input Sens. / Impedance: 1.0V / 33 kohms

Frequency Response: 10-100kHz (±1dB)

S/N Ratio (IHF A): 116dB

Power Consumption: 250 watts

Dimensions (W x H x D): 433 x 92 x 334mm

Front Panel Height:

Weight (net): 8.1 kg / 17.86 lbs

The Rotel Co. Ltd.

10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan

Rotel of America

54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]

1

17

/8 x 3 5/8 x 13 1/8"

80 mm, 3.1"

www.rotel.com

Rotel Europe

Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]