Rotel RAP-1580MKII Specification Sheet
SURROUND AMPLIFIED PROCESSOR
RAP-1580MKII
Supports
Dirac Live LE
RAP-1580MKII is the ideal home theater solution delivering
uncompromised performance packaged in a size eicient
chassis that rivals many separates theater component
installations. It is an ultra-high-performance multichannelintegrated amplifier supporting DTS:X and Dolby Atmos 7.1.4
surround processing bringing music and movies to life with
stunning clarity. The amplifier section is built upon a powerful
Class AB design driving all 7 channels simultaneously at 140
watts per channel into 4 ohm speakers loads, anchored by a
massive Rotel factory-made toroidal transformer.
RAP-1580MKII utilizes an array of 6 high performance Wolfson
24-bit/192kHz Digital-to-Analog Converters. These low noise,
audiophile quality DACs are supported with premium-grade
audio components in circuits tuned by Rotel’s acoustic
engineering team in the U.K.
Dirac Live LE and a USB microphone are included providing
unrivaled room correction and system calibration. Dirac delivers
improved staging, better clarity and deeper, tighter bass
ensuring the RAP-1580MKII delivers optimal performance in any
setting.
Decodes
DTS:X
Supports
Dolby Atmos
Bluetooth
with apt-X
The front HDMI input and all 7 rear HDMI inputs support HDMI
2.0b 4K video with HDCP 2.2 supported on 3 of these inputs
and both 4K/HDR video outputs. The seven-inch front panel
graphic display provides easy adjustments of all configuration
parameters directly on the unit ideal for set-ups where the
equipment is installed in a remote location.
The RAP-1580MKII supports a vast array of audio sources
including 3 analog, 6 digital, PC-USB (24b/192k), apt-X
Bluetooth, XLR, Moving Magnet Phono Stage, multi-input and
front panel iOS USB. The unit also includes 12V trigger controls,
IR remote input and outputs, RS232 and Ethernet connections
for eortless integration with all popular control systems.
Rotel's RAP-1580MKII is simple to operate, powerful, flexible
and refined. It is a state-of-the-art single chassis audio/video
processor including best-in-class Dirac Room Correction that
outperforms most component systems. In stereo or surround
sound, this is a serious audio component.
7 x 140W class AB
amplification
Moving Magnet
Phono Input
www.rotel.com
SURROUND AMPLIFIED PROCESSOR
RAP-1580MKII
All specications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
www.rotel.com
SPECIFICATIONS
Audio
Continuous Power Output
1k Hz, THD < 0.05%, 4 ohms
1k Hz, THD < 0.05%, 4 ohms
1k Hz, THD < 0.05%, 8 ohms
20 - 20k Hz, THD < 0.05%, 8 ohms
Total Harmonic Distortion
Intermodulation Distortion
(60 Hz : 7 kHz, 4:1)
Frequency Response
Phono Input
Analog Bypass
Digital Input
Damping Factor (1k Hz, 8 ohms)
Signal to Noise Ratio (A-weighted)
Analog Bypass
Digital Input
Input Sensitivity/Impedance
Phono Level
Line Level
Balance Level
Preamp Output Level
Digital Audio
Video
Input Resolutions
Output Resolution
Color Space Support
Deep Color Support
HDMI Inputs/Outputs
General
Power Consumption
Power Requirements (AC)
BTU (4 ohms. 1/8 Power)
Dimension (W x H x D)
Front Panel Height
Weight
200 watts / channel
(2 channels driven)
140 watts / channel
(7 channels driven)
135 watts / channel
(2 channels driven)
100 watts / channel
(7 channels driven)
< 0.05%
< 0.05%
20 Hz - 20k Hz, ± 1 dB
10 Hz - 100k Hz, ± 1 dB
20 Hz - 20k Hz, ± 0.5 dB
230
100 dB
96 dB
3.85 mV / 47k ohms
300 mV / 100k ohms
600 mV / 100k ohms
1.2 V
LPCM (up to 192kHz, 24-bit)
Dolby® Surround, Dolby®
TrueHD, Dolby® Atmos,
DTS-HD Master Audio, DTS:X
Dirac Live LE
480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p 24Hz,
3D, 4K, UHD
480i/576i, 480p/576p, 720p
1080i, 1080p, 1080p 24Hz,
3D, 4K, UHD
sRGB, YCbCr 4:2:2, YCbCr 4:4:4
24-bit, 30-bit, 36-bit
8 inputs with 3 supporting HDCP 2.2
2 outputs supporting HDCP 2.2
Audio Return Channel
1100 watts
< 0.5 watt (standby)
120 volts, 60Hz
230 volts, 50Hz
2800 BTU/h
431 x 192 x 470 mm
17 x 7 5/9 x 18 1/2 in
4U / 177 mm / 7 in
22.8 kg / 50.27 lbs
Loading...