Rotel P5 Information Sheet

STEREO PRE-AMPLIFIER

AKM premium 32-bit/ 768kHz Digital to Analog Converter

The Michi P5 Control Amplifier delivers the ultimate performance in audio processing with a full complement of analog and digital source inputs. Over 3 years in the making, every aspect of the P5 has been carefully crafted including the power supply, circuit design and critical component selection to ensure the highest integrity of the audio signal eliminating unwanted noise and distortion.

The Dual AKM 32-bit DACs feed the Class-A preamplifier circuit ensuring detail, accuracy and the highest musical fidelity while maintaining crucial rhythm and timing for all musical genre regardless of your listening style. These circuits are supported by an array of 17 independent voltage regulators driven from 2 custom designed and factory built toroidal transformers with low ESR smoothing capacitors to deliver ripple free current to all critical circuits.

Moving Coil and Moving Magnet phono stage input

Bluetooth with apt-X and AAC

Balanced XLR inputs and outputs

Accuracy and detail are essential in reproducing audio and equality important is delivering music that is enjoyable and entertaining. The P5 excels in all aspects building on over 55 years of audio design experience. The bespoke in-house manufacturing facility ensures this preamplifier is built to highest of quality standards allowing it to proudly wear the Michi logo.

Automation and control system integration is easily supported with RS232 and Ethernet connections.

The Michi P5 includes MQA (Master Quality Authenticated) technology, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording.

Supports MQA

Includes remote control

STEREO PRE-AMPLIFIER

SPECIFICATIONS

Total Harmonic Distortion

(20Hz-20kHz)

Intermodulation Distortion

(60 Hz : 7 kHz, 4:1)

Input Sensitivity / Impedance

Phono Input (MM) Phono Input (MC) Line Level Inputs (RCA) Line Level Inputs (XLR)

Input Overload

Phono Input (MM) Phono Input (MC) Line Level Inputs (RCA) Line Level Inputs (XLR)

Output Level

Line Level (RCA) Line Level (XLR)

Frequency Response

Phono Input Line Level Inputs

Tone Controls

Bass Treble

Signal to Noise Ratio

(IHF “A” weighted)

Phono Input Line Level Inputs

Channel Separation

Phono Input Line Level Inputs

< 0.002%

2.5 mV / 47k ohms 250 uV / 47k ohms 160 mV / 47k ohms 250 mV / 100k ohms

199 mV 22 mV 12 V 12 V

1 V / 470 ohms 2 V / 100 ohms

20 Hz-20kHz (0 ±0.3 dB) 10 Hz-100kHz (0 ±0.3 dB)

±10 dB at 100Hz ±10 dB at 10kHz

80 dB 116 dB

> 55 dB > 85 dB

Digital Section

Frequency Response

Signal to Noise Ratio

(IHF “A” weighted)

Input Sensitivity/Impedance

Digital Output

Load Impedance

Coaxial/Optical Digital Signals

PC-USB

Power Requirements

Europe USA

Power Consumption

Standby Power Consumption

Normal Network Wakeup

BTU (4 ohms, 1/8 power) Dimensions (W x H x D)

Front Panel Height Weight (net)

Finish

20Hz - 20kHz (0 ± 0.3 dB Max) 100 dB

0 dBFs / 75 ohms

0.75V, Peak to Peak 75 Ohms SPDIF LPCM (up to 192kHz 24 bit) USB Audio Class 1.0

(up to 96kHz 24-bit) USB Audio Class 2.0

(up to 384kHz 32-bit)* *Driver installation required DSD and DoP support

MQA support

230 Volts, 50 Hz 120 Volts, 60 Hz

40 watts

< 0.5 watts < 2 watts

87 BTU/h 485 x 150 x 452 mm

19" x 6" x 17 3/4" 132 mm / 5 1/4"

22.9 kg, 50.5 lb Black

All specifications are accurate at the time of printing.

Michi reserves the right to make improvements without notice.