Rotary GB03633-04 Quick Start Guide

WI2

DISPLAY AND CROWN/BUTTON OPERATION

ADJUSTING THE STOPWATCH HAND POSITION

WATCH INSTRUCTIONS

For more information, or to view the

Rotary watches collections, please visit:

www.rotarywatches.com

[e-mail]

Minute Hand

Hour Hand

Stopwatch minute hand
(Move in minute increments)

Second hand

Stopwatch second hand
(Move in second increments)

ADJUSTING THE STOPWATCH HAND POSITION

Stopwatch
minute hand

Crown

Stopwatch second hand

1. Pull out the crown to the second click

2. Press button (A) or (B) to reset the stopwatch second

and minute hands to the “0” position.
* By pressing button (A), the hands move counter
clockwise.
* By pressing button (B), the hands move clockwise.

3. Push the crown back to normal position

24-hour hand
(Indicates the time on a 24-hour basis)

Button (A)
*In stopwatch function Start/Stop

Crown at normal position

Second click *Time setting

First click *Date setting

Button (B) *In stopwatch function
Split/Split release/Reset

Before setting the time, check if the Stopwatch second and
minute hands are at the “0”(12 o’clock) position.
If the stopwatch is in use, press the button in the following
order to reset it, and then, check if the hands return to “0”
position. (For details , see “HOW TO USE THE STOPWATCH”)

If the stopwatch is counting: (A) > (B)
If the stopwatch is stopped: (B)
If the stopwatch is counting: (B) > (A) > (B)

* If either of the stopwatch hands are not at the “0” position, reset them
following the procedure below.

TIME SETTING

* (Before setting the time, check that the chronograph measurement is stopped)

1. Pull out the

click.

Crown

3. Pull out the crown to the second click when the second hand is at the 12 o’clock position. It
will stop on the spot and advance the hour and minute hands by turning the crown.
(Check that 24-hour hand is set correctly)

* When the crown is at the second click position do not press any button. Otherwise, the chronograph hands
will move.

4. Push the crown back in to the normal position

* Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly. If it is necessary to set the date during that time

2. Turn the crown
clockwise until the
previous day’s date
appears

HOW TO USE THE STOPWATCH (Basic operation)

HOW TO USE THE STOPWATCH (Accumulated elapsed time measurement)

START

Press button (A) to start.

Stopwatch
minute hand

Stopwatch second hand

HOW TO USE THE STOPWATCH (Split time measurement)

START

Press button (A) to start.

SPLIT

Press button (B) to stop.
Press button (A) to begin again.

STOP (Finish)

After elapsed time, press button (A) to stop.
Press button (B) to reset to “0’00”.

STOP

Press button (B) to stop.
Press button (B) once more to
reset to “0’00”.

START

Press button (A) to start

STOP (Finish)

After elapsed time, press button (A) to stop.
To continue timing, press button (A).
Once the elased time has passed, press button (A) to stop.
Press button (B) to reset to “0’00”.

Lifetime Guarantee

All Rotary watches should be serviced at 3 year
intervals at a Rotary Service Centre to ensure the
Lifetime Guarantee remains valid.

Service centre details

Rotary Watches Limited
277 Prince Avenue

Essex
SS0 OJS

01702 337 061