Ronan X54-3202 User Manual

ISO 9001

REGISTERED

RTD Transmitters - Field Configuration Options - High Density DIN Rail Packaging

X54-3202 2-Wire (output loop powered) Dual Channel Universal RTD Transmitter

♦ High Density Dual Channel Packaging

♦ Field Configurable Options Including:

four (4) RTD types, seven (7) standard input spans

with selectable zero offsets (for non-linearized ranges only)

♦ Max. Loop Load = 700 ohms at 24 vdc Loop Power

♦ Full Input/Output/Power and Channel Isolation

♦ Front Access to Zero and Span Adjustments

♦ Standard 35 mm DIN Rail Mounting

DESCRIPTION: The X54-3202 is a dual channel RTD transmit-

ter powered by the output 4-20 mA current loop. Features include:
two piece plug-in connectors for easy wiring and maintenance; field
configurable ranges and RTD types; optional linearized outputs; full
1000 vac isolation; and front panel access to ZERO and SPAN adjust­ments. RFI protection, wide operating temperature, and high accuracy
are standard features. Custom inputs, outputs, scaling and linearization
are available from the factory.

SPECIFICATIONS:

Input:
RTD sensor types: 100 ohm platinum, 120 ohm nickel,

10 ohm copper.
(linearized outputs available for Platinum or Nickel only)

Input Impedance:

> 100 K ohms.

Outputs: 4-20 mA into 700 ohms with 24 vdc loop power
i.e.: Max. Rload = (Vloop supply - 10 vdc)/ 20 mA

Span Adjustment:

Front-accessible, multi-turn, infinite resolution potentiometer
permits minimum +/- 5% adjustment.

Zero Adjustment:

Front-accessible, multi-turn, infinite resolution potentiometer
permits minimum +/- 5% adjustment

Calibrated Accuracy:
+/- 0.1% of span (linearization errors additional on large

span applications, consult factory )

Isolation:
1,000 vac between channels, input and output.

Input and output circuits isolated by transformers.

Common Mode Rejection:

> 120 dB, DC at 60 Hz.

Specifications apply at 23 +/- 2°C (74 +/- 2°F) unless otherwise specified, and are subject to change without notice,

Common Mode Voltage:

1000 volts peak AC maximum without damage.

Ambient Temperature Coefficient:
Ambient temperature range: 32 to 158

Gain: < +/- 0.01 % /
Zero: < +/- 0.01 % /

Ambient Temperature Range:
Operating: -20 to 158°F (-25 to 70°C).

Storage: -40 to 158

Power Supply Range:
10 to 40 vdc (max. allowable at X54)

(reverse polarity protected)

Radio Frequency Effects:

< 0.4 mV (referred to input) + 0.2% of span (referred to out­put) when exposed to 5W transmitter with frequency range
20-460 MHz at a distance of 1 m.

Calibration:
Typically, factory calibrated to customer specified ranges.

Customer configurable for non-linearized applications.

Terminals:

High temperature polyester type, wire size 12 AWG max., 10
A max., 300 V max.

A Family of

Products!!!

Transmitters

Alarm Trips

I/I Isolators

°F (0 to 70°C).
°F.
°F.

°F ( -40 to 70°C).

Page 1 of 2

Ronan Engineering Company

Ph: 800-327-6626 Fax: [phone] E-mail: [e-mail] Web: www.ronan.com

Rev. 0

X54-3202 2-Wire (loop powered) Dual Ch. Universal RTD Transmitter (continued)

TERMINAL ARRANGEMENT:

Outputs

Ch1

Ch2

J2*J2* J1*

+

1

-

2

NC

3

+

4

-

5
6

NC

*

1.) Plug-in connector design simplifies installation and
maintenance.

2.) Use up to 12 awg wiring.

3.) When inserted, case back cover provides a mechanical
cover for connector screws (as required by European
standards).

3-wire RTD

1
2
3
4
5
6

Inputs

Ch1

Ch2

MECHANICAL DETAIL:

2.47”

62.7mm

DIN Rail

2.23”

54.6mm

C

L

0.850”

21.6mm

5.80”

147.3mm

ORDERING INFORMATION:

X54-3202-(I) (II) - (I) (II)

Channel #2
Channel #1

I = RTD type (100 = 100 ohm Platinum 0.00385)
( 1 2 0 = 1 2 0 o h m N i c k e l )
( 1 0 = 1 0 o h m C o p p e r @ 0 ° C )
( 9 = 10 ohm Copper @ 25°C)
II = Standard Range code (A - G) or
specify special range; e.g. 0-450°F linearized = (0/450°F)

Example: Standard Ranges 0-500°F linearized
X 5 4 - 3 2 0 2 - 1 0 0 E - 1 0 0 E

Example: Special Range 0-450°F linearized
X54-3202-100L(0/450°F) - 100L(0/450°F)

(add “L” after RTD type to request linearized output)

Accessories:

D2-35X7.5 35 mm X 7.5 mm “U” style DIN rail, sold per foot

STANDARD INPUT RANGES:

Code

A -40 to +40 -40 to +4 100, 120

B -40 to +104 -40 to +40 100, 120

C 32 to +100 0 to +38 100, 120,

D 32 to +212 0 to +100 100, 120,

E 0 to +500 -18 to +260 100, 120

F 32 to +932 0 to +500 100

G 0 to +1500 -18 to +815 100

Above ranges are standard offerings for fastest deliv-

ery, and they are linearized for Platinum and Nickel
RTDs only. Contact Ronan for price and delivery of

non-standard ranges with or without linearization.

These transmitters can be configured in the field or
pre-configured at the factory to the customer’s spe­cific RTD type and temperature range. Factory con-

figuration is only necessary if linearization is re-

quired. Only the Platinum and Nickel RTDs hav e

ºF

the linearized output option.

ºC

Sensor

Types

10, 9

10, 9

Page 2 of 2

Ronan Engineering Company

Ph: 800-327-6626 Fax: [phone] E-mail: [e-mail] Web: www.ronan.com

Rev. 0