Before initial use, insert a microSD card.
(suggested at least 4GB, up to 64GB)
Charging the Unit
Fully charge Rollei Car-DVR for initial use by:
• Car charger
• PC USB port
• USB adapter
During charging, screen shows battery icon or status indicator ashes in
orange
Shooting a Video
1. Power on:
Press
2. Record:
Press
Press again to stop.
3. Playback:
Press
Press
Press [Play
4. Return to preview:
Press [
5. Power off:
Press and hold
2 |
(not included)
. When Rollei Car-DVR is fully charged, the indicator turns off.
to turn on Rollei Car-DVR.
to start recording.
to enter menu settings.
to select [Playback].
] to play the video and press [ ] to stop.
] to return.
for 2 seconds.
microSD card
Page 4
English
Rollei Car-DVR Operation
Auto REC
60 SEC
OFF
In preview, press to enter menu settings
Button functions indicated by
to navigate menu settings and to back to preview .
Menu Settings
Rollei Car-DVR has eight menu settings. Advanced settings can be set
up via mobile APP.
Menu SettingsDescriptions
Playback
Action Cam
Dash Cam
WiFi - Local
WiFi - Cloud
Voice Record
Auto Record
Screen Auto Off
Settings
Note: After 10 seconds of non-operation in menu settings, screen
returns to preview.
Play recorded videos
Switch between Action Cam and Dash Cam
Enable/Disable WiFi for wireless connection
Enable/Disable internet cloud connection
Enable/Disable voice recording (Dash cam
mode only)
Enable/Disable
engine starts (Dash cam mode only)
Screen turns off after 60 seconds of non-
operation
Reset to factory default settings or format SD
card.
.
. Use
auto recording when car
(Dash cam mode only)
| 3
Page 5
English
Record Modes
Rollei Car-DVR has two recording modes for different applications:
Action Cam: Shoot normal videos.
Dash Cam: Shoot loop and emergency videos.
Comparison between modes:
ModeAction Cam Dash Cam
Record typeNormal Loop Emergency
Record trigger
Record duration
Display info
.
Note:
1. During loop recording, oldest les are overwritten if microSD card is full.
2. During loop recording, press to enable/disable mute fuction.
P
ress in preview
Unlimited
00:06:36
SD card remaining timeCurrent date & time
Three min. sections
2014/01/01 21:06:36
Transfer Files to PC:
1. Connect Rollei Car-DVR to PC via Micro USB cable.
2. Find video at "My computer\Removable Disk\".
3. Copy, move, delete, and playback videos on PC.
View Rollei Car-DVR Screen on TV:
1. Connect Rollei Car-DVR to TV
2. Turn on Rollei Car-DVR.
3. Rollei Car-DVR screen displays on TV simultaneously.
4 |
via
Micro HDMI cable (not included).
• Car impact
during
• Press
loop recording
One min. section
(30 seconds before
and after the event)
Page 6
English
MobileRollei Car-DV
R
Local
Wireless & APP Operation
Internet
AP
Unieye
Server
AP
3G/4G Mobile Hotspot
3G/4G Mobile
Wireless Router
Wireless Router
Rollei Car-DV
R
AP
Mobile
Internet
Before inital using wirless connections, download and install APP
[Rollei Car-DVR] from Google Play Store and Apple Store.
[Rollei Car-DVR] has two functions:
(1) Local - Direct control (2) Internet - Internet live view
Rollei Car-DVR
Local
(1)
(2)
Local
【
】
Mobile connects to Rollei Car-DVR directly via WiFi for remote
control, live view, album management and
Internet
Internet
【
】
Rollei Car-DVR
Mobile connects to cloud server to view live videos uploaded
from internet remote Rollei Car-DVR.
setup.
| 5
Page 7
English
Local】Function
Internet
【
Local
Before using mobile APP's
Local】function, ensure Rollei Car-
【
DVR WiFi is on and Rollei Car-DVR Cloud setting is off. Once WiFi
is ready, preview shows Rollei Car-DVR name (R2-xxxxxxxx) for few
seconds.
Mobile Connects to Rollei Car-DVR
1. F
or Android: Turn on [Wi-Fi].
For iOS:
2. Run [Rollei Car-DVR].
3. Tap【Local】and select the Rollei Car-DVR to enter【Local】View
Page. Tap [
Note:
• Mobile cannot connect to Rollei Car-DVR while Rollei Car-DVR is
recording.
• For rst use, password is not required. User can set Rollei Car-DVR
password in Setup Page.
Go to [Settings] [Wi-Fi].
Turn on [Wi-Fi] and select the Rollei Car-DVR name.
] to scan again if Rollei Car-DVR is not found.
6 |
iOS Settings
Local View PageLocal Main Page
Page 8
English
4.【Local】function has three function pages: View, Album and Setup.
View Page
ItemsDescriptions
Shoot videos and les are saved into Rollei Car-DVR
microSD card
Shoot videos or Take photos and les are saved into
mobile "Album\RolleiCar-DVR
\"
For multiple Rollei Car-DVRs user :
• Enable Quad-View for multiple live view on mobile
• In Quad-View, select
a window for single view.
Upside down image
Talk to Rollei Car-DVR from mobile
Album Page
FoldersDescriptions
View or delete video les recorded in action cam mode
View or delete video les recorded in dash cam mode
Setup Page
GroupsDescriptions
Camcorder
Settings
Internet Settings
Edit name, password, format SD card, resolution
etc.
Edit Email and AP and save in Rollei Car-DVR.
(For internet cloud server connection)
Car DVR Settings Set motion detector, impact sensor, etc.
1.
In Setup Page, tap [Save] to complete settings to Rollei Car-DVR.
Note:
2.
Mobile media player may not support SuperHD video.
| 7
Page 9
English
Rollei Car-DVR SD Card Setup
AP
AP
AP
AP
AP
AP
When SD card is rst-time use or reformatted in Rollei Car-DVR, user
should allocate memory for Portable Mode and Car Mode.
Go to [Setup] [ Rollei Car-DVR Settings
]
Adjust slide bar and press [Format]
button to complete SD card setup.
Rollei Car-DVR Internet Setup
Before using internet cloud service, Email and AP must be properly
set up.
1. Go to [Setup] [ Internet Settings
Edit Email and AP
2. Tap [Save] to complete Email & AP
settings.
Note: AP(Access Point) can be
• Wireless Router or
• 3G/4G Mobile Wireless Router or
• 3G/4G Mobile Hotspot
Wireless Router
8 |
]
3G/4G Mobile
Wireless Router
3G/4G
Mobile Hotspot
Page 10
English
Motion Detector Setup
When car's engine stops and motion is detected,
Rollei Car-DVR will automatically records videos
till no motion is detected.
1. Go to APP
Turn on [Motion Detector] Tap [Save].
2.
Press [Home] to disconnect from Rollei Car-DVR.
3. Change Rollei Car-DVR to dash cam mode,
4. When car engine stops
[Motion Detector?] will pop up
Press
otherwise [Motion Detector] will automatically
activate after 10 seconds
Choose to cancel [Motion Detector] for this time
[Setup] [Car DVR Settings]
will show on screen.
to manually activate [Motion Detector] ,
G-Sensor Setup
When Rollei Car-DVR is recording and any impacts happen, Rollei
Car-DVR automatically records emergency events if G-Sensor is set.
Go to APP
Select [G-Sensor], [H]/[L] Tap [Save].
Note : [H] High sensitivity. [L] Low sensitivity.
[Setup] [Car DVR Settings]
| 9
Page 11
English
Internet】Function
【
Internet
Before using APP's
internet setup has been completed.
Internet】function, ensure Rollei Car-DVR
【
Rollei Car-DVR Connects to Cloud Server
Enable [Cloud ] in Rollei Car-DVR to upload video streaming to
cloud server. Connecting status will be shown on screen.
3. For adding Rollei Car-DVR or using another
mobile, tap [
ID and password.
4. Tap Rollei Car-DVR ID/name to view internet
live videos.
10 |
] Enter the Rollei Car-DVR
Internet
【
Main Page
】
] and
Page 12
English
Troubleshooting
SituationCause/Solution
Rollei Car-DVR
cannot turn on
Rollei Car-DVR is
frozen
Rollei Car-DVR
cannot record
Rollei Car-DVR
cannot connect to AP
or could server
Mobile cannot nd
Rollei Car-DVR
Local
【
】
Mobile cannot watch
live view
Local
【
】
Mobile cannot connect
to cloud server
Internet
【
】
Mobile cannot watch
live view
Internet
【
】
Forget Rollei CarDVR password
Power is low. Recharge battery
Press and hold
shutdown; press again to turn on
•
No microSD card or microSD card is full
•
microSD card cannot be recognized
•
Format microSD card or replace microSD card
• Invalid AP name or password
• Weak WiFi signal or not in WiFi coverage
• No internet or cloud server is not accessible
• Blocked by some rewall
• Rollei Car-DVR WiFi is disabled or not in
WiFi coverage
• Mobile WiFi is disabled
• iOS user does not choose Rollei Car-DVR
name in Wi-Fi Settings
• Tap [Refresh] button on [Rollei Car-DVR]
• Weak WiFi signal
• Rollei Car-DVR is recording
• Rollei Car-DVR is occupied by other mobile
Check mobile 3G/4G or WiFi internet
connection
The internet bandwidth is insufcient for Rollei
Car-DVR upload or mobile download
Enter Rollei Car-DVR menu settings and select
[Settings]
[Factory Reset] to reset
button for 5 seconds to force
| 11
Page 13
GPS Receiver
1. Hardware operation
Insert GPS receiver into your device.
2. Install Software to Computer
1. Connect camcorder to PC via standard Micro USB cable.
Note: The USB cable in accessory kit is only for power
supply in car. Please use other Micro USB cable for
installation (ex. Android smart phone's usb cable).
2. Find Setup.exe in "My computer\Removable Disk\DCIM".
3. Double click Setup.exe to install/
3. Software operation
1. Take out the SD card from your device, and put it into
the card reader of your computer.
2. Click “Unieye Map
3. An active Internet connection is required to use Google
Maps View.
Unieye Map
1. Google Maps View
• The Start
marked on the map.
English
12 |
and End location of the video will be
” and run it on your computer.
Operation
Page 14
• Pressto select your SD card.
(Unieye Map only can read the video les in SD card )
• Press
• Press
2. Speed Meter
• Show the speed inforamtion from the
records of the video.
• Press to switch the scales of
meter in Kilometer per hour.
• Press to switch the scales of
meter in Mile per hour.
3. Compass
• Show the moving direction from the
records of the video.
4. Calendar
• Press
• Press : move to previous month.
• Press the date in the calendar, the taken videos show dates
information in the 24 hours meter.
• Click on color lines to view the video.
to forward/play/stop/backward your video.
to adjuest the volumn of your video.
: move to next month.
The length of video clip60 minutes24 hours
English
| 13
Page 15
5. PIP Mode
• In Windows mode, press
Screen mode.
• The defualt view of Full Screen mode : video in parent
window, map in child window.
• In Full Screen mode, press
Windows mode.
6. PIP Switch
14 |
• Press
child window.
• Press
English
to switch map in parent window, video in
again to switch back.
to change view to Full
to switch view back to
Page 16
Conformity
The Manufacturer hereby declares that the CE marking was
applied to the Rollei CarDVR 210 in accordance with the basic
requirements and other relevant provisions of the following
CE Directives:
The EC Declaration of Conformity can be requested from
the address specified on the Warranty card.
English
| 15
Page 17
License Statement
The software used in this product is licensed subject to a license
pursuant to the GNU – General Public License conditions.
We expressly draw attention to the fact that under the GNU – General
Public License conditions no liability is accepted.
The starting point for the software is the software published online at
http://sg-gpl.net/
The software listed there is licensed pursuant to the
GNU – General Public License conditions.
Device-related changes have been made to this software for the
product in question. The source text of the software implemented
in the product in question can be obtained in response to an enquiry
sent to the e-mail address
info@rollei.com
In this instance your e-mail must contain details of what the
relevant product is, the relevant serial number and documentary
evidence of your commercial source of supply as well as
documentary evidence of the date on which the product was
purchased from the trade source of supply. We guarantee supply
of the source text of the implemented software for a period of at
least three years from date of purchase from the trade source of
supply where the trade source of supply has sourced the product
from us directly or via strictly trade-only dealers.
English
16 |
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.