Roland SPD-SXKIT, RT-30K, RT-30HR Quick Start Guide

(Kick Trigger)

(Dual Trigger) (Single Trigger)

Percussion Sound Module Parameter Settings

Following you will nd specic parameter settings for the indicated percussion sound modules. These are VERY important. If needed, please refer to the Owner’s Manual of your module.

* The trigger parameters should be adjusted as necessary to match the actual state of your conguration, and the environment in which it is being

used.

TD-20/TD-12 (Percussion Sound Module)

For RT-30K Kick Trigger

Trig Type RT7K RT5S RT3T

TRIGGER BASIC

TRIGGER XTALK CANCEL

TRIGGER ADVANCED

Sensitivity 8 10 10 Threshold 16 11 16 Curve LINEAR LINEAR LINEAR Xtalk Cancel 30 30 30 Mount Type PAD PAD PAD

Xtalk Group 1 1 1 Scan Time (ms) 3.5 2.0 2.0

Retrig Cancel 13 11 13 Mask Time (ms) 12 10 10 Rim Gain ----- 1.0 ----RimShot Adjust ----- 3.0 ----XStick Thrshld ----- 90 -----

For RT-30HR Dual Trigger

RT-30HR Dual Trigger Compatible Inputs

TD-20: 2 (SNARE), 3–6 (TOM1–4), 12–15 (AUX1–4) TD-12: 2 (SNARE), 3–5 (TOM1–3), 11–12 (AUX1–2)

TD-6V (Percussion Sound Module)

TRIG BASIC

TRIG ADVNCD

For RT-30K Kick Trigger

TrigTyp RT-7K RT-5S RT-3T Sensitivity 10 10 10 Threshold 6 6 8 TrigCurve LINEAR LINEAR LINEAR Xtalk Cancel 30 30 30 Scan Time 2.0 ms 2.0 ms 2.0 ms Retrig Cancel 6 4 5 Mask Time 24 ms 12 ms 12 ms Rim Sens ----- 7 -----

For RT-30HR Dual Trigger

For RT-30H Single Trigger

RT-30HR Dual Trigger Compatible Inputs

2 (SNARE)

TD-3 (Percussion Sound Module)

For RT-30K Kick Trigger

Trig Type tYP t7K t5S t3t Sensitivity SnS 9 10 10 Threshold thr 10 10 12 Curve Cur Lnr Lnr Lnr Scan Time Scn 2.5 2.5 2.5 Retrig Cancel rtG 8 4 5 Crosstalk CrS 50 50 50 Mask Time MSK 12 12 12

Rim Sens rMS ----- 11 ----- Rim Gain rMG ----- 1.0 -----

RT-30HR Dual Trigger Compatible Inputs

SNARE

For RT-30HR Dual Trigger

For RT-30H Single Trigger

TMC-6 (Trigger MIDI Converter)

For RT-30K Kick Trigger

VELOCITY CURVE Lnr Lnr Lnr THRESHOLD 8 7 7 SENSITIVITY 10 10 10 TRIG TYPE KiK Snr (*) toM SCAN TIME 3.0 2.5 2.5 RETRIG CANCEL 10 8 10 MASK TIME 40 12 12 XTALK CANCEL 30 30 30

For RT-30HR Dual Trigger

For RT-30H Single Trigger

(*) When you connect the RT-30HR to the trigger input 2 (SNARE), make the settings as shown below. 2 HEAD: “Snr ” 2 RIM: “riM”

RT-30HR Dual Trigger Compatible Inputs

2 (SNARE)

SPD-20 (Total Percussion Pad)

For RT-30K Kick Trigger

TRIG SENS 10 10 10 TRIG THRESHOLD 8 7 7 TRIG TYPE KiK 120 toM TRIG CURVE 0 0 0

Advanced Trigger Parameter

Scan Time Scn 10 10 10 Retrigger Cancel rEt 7 6 6 Mask Time MSK 28 12 12 Crosstalk Cancel CrS 40 40 40 Rim Sensitivity riM ----- 9 -----

For RT-30HR Dual Trigger

For RT-30H Single Trigger

RT-30HR Dual Trigger Compatible Inputs

1, 2

SPD-S (Sampling Pad)

For RT-30K Kick Trigger

Input Mode TRGx2 HD&RM TRGx2 Type RT-7K RT-5S RT-3T Sensitivity 9 10 10 Threshold 10 10 10 VeloCrv LINEAR LINEAR LINEAR Scan Time 2.5 2.5 3.0 RetrigCancel 6 6 6 Mask Time 12 12 12 XtalkCancel 30 30 30 Rim Sens ----- 11 ----Rim Gain ----- 1.0 -----

RT-30HR Dual Trigger Compatible Inputs

TRIG IN

For RT-30HR Dual Trigger

For RT-30H Single Trigger