Roland JD-XA Owner’s Manual

JD-XA Version 1.50 Supplementary Manual

This manual explains the functions that have been added in version 1.50 of the JD-XA. Read this manual in conjunction with the JD-XA Owner’s Manual.

New Preload Program Sounds

The preload program sounds have been refreshed; now 256 sounds are provided.

The new programs appear when you execute Factory Reset following the update.

* We recommend that you back up the JD-XA’s program sounds

before executing Factory Reset. For details on how to back up, refer to JD-XA Owner’s Manual “Restoring Backup Data from a USB Flash Drive” (p. 15).

Copy Program Function

PROGRAM has been added to the sound copy function, allowing you to copy a factory-set program sound to the temporary area.

* This lets you individually recall the new program sounds without

having to execute Factory Reset after the update.

1.Hold down the [Shift] button and press the [Bank] (Copy)

button.

The COPY screen appears.

<COPY> [Ent] PROGRAM À

2.Use the cursor [

press the [Enter] button.

] [J] buttons to select “PROGRAM,” and

3.Use the [-] [+] buttons to select the copy-source data, and

then press the [Enter] button (select Source).

Src:FACT:A01 À Massive Pad

MEMO

You can also use the [Bank] and [01]–[16] buttons.

4.Press the [Enter] button.

Dest:TEMP [Ent]

5.Press the [Enter] button.

If you decide to cancel, press the [Exit] button.

6.Press the [Enter] button.

The screen indicates “Completed!” and the copy is executed.