Rocky Mountain Radar RMR-DLSX595 User Manual

RMR-DLS-X595

Advanced Micro Technology Design / 360 Degree
Safety / Radar Laser Detector / Laser Scrambler

Owner’s Manual

ROCKY MOUNTAIN RADAR

1. Introduction

Dear Rocky Mountain Radar Owner,

Congratulations on your purchase of one of the world’s most
sophisticated radar/laser detectors. The RMR-DLS-X595 is a
completely integrated radar/laser detector which responds not only to all
the radar guns in use today, including “Stalker”, but also to the other
latest development in speed monitoring devices- the laser gun.

This unit scrambles all police laser speed measurement devices and
operates automatically.

This model provides distinct visual and audible alerts to warn you of the
presence of X, K, and all kinds of Ka Band radar guns in the front and
rear of you. This model also provides the benefit of ‘undetectability’ by
alerting you to the presence of VG-2 (‘The Radar Detector detector’).

It also incorporates a new safety feature - Safety Alert(SA) and Safety
Warning System(SWS). This safety feature warns you of the presence
of potential road hazards by detecting signals from safety radar
transmitting devices.

Note :

Important : The RMR-DLS-X595 is not designed to help you disobey
the law. A defensive driver always obeys the posted speed limit and
legal driving methods.

Federal and Local Regulations

The FCC passed the Communications Act in 1934 to give all citizens the
right to receive all types of radio transmissions. The same radio
frequencies used by police radar are also used by other devices, such
as automatic door openers, burglar alarms, and some amateur radio
equipment. Since the RMR-DLS-X595 is just a radio receiver tuned to a
specific portion of the public radio spectrum, it is protected under this act.

Some local, state, and federal regulations may prohibit the use of this
detection device. Please check with authorities regarding the use of
this device before operating it.

1

2. Control and Features

1) Included with your Radar Detector

Hook and Loop Fastener Tape

Power Cord

Spare Fuse

RMR-DLS-X595 Windshield Bracket with

Suction Cups

2

Ticket Rebate

2) Controls and Functions

a. On/Off Volume Control

b. Dim Button

c. Mute Button

d. City Button

e. DC 12V Power Input Jack

f. Radar Antenna

g. Front Laser Detection Lens

h. Rear Laser Detection Lens

Receives incoming laser signals from rear

i. Power-On and VG-2 Indicator

j. X-Band Indicator

k. K/Ka Band Indicator

l. City Indicator

m. LED Signal Strength Meter

n. Laser Scrambler Indicator

Laser Scrambler Indicator is always “ON”.

3

4

g

h

b

c d

e

a

f

3. Installation

1) Mounting Guidelines

For the best performance, select the proper location for the unit
where it has a direct view of the road. The radar antenna is located
behind the rear panel of the unit and the laser detection lenses are
located behind the rear panel of the unit and the front window. The
antenna and sensors should not be obstructed by metal or metallic
surfaces and should be pointed at the horizon for accurate long
range detection.

·Choose a location that does not block the driver’s vision.

·Mount the detector in a level position.

·Do not mount the detector behind metal surfaces, windshield

antenna, wiper blades, ornaments, or mirrored glass.

·Heated windshields, currently available as an option on some Ford

(Instaclear) or GM(electriclear) vehicles act as an impenetrable
barrier to radar signals.

·Do not mount the detector where the driver or passenger might

collide in the case of an abrupt halt.

Note : Whichever mounting method you choose, remember to

place the radar detector out of view when you leave your
vehicle.
This keeps the detector out of sight from thieves and
prevents exposure to extremely high temperatures.

Note : If necessary, you may adjust the bracket to the proper angle

by bending it. To remove your detector, pull up the detector
from the front pulling it towards you.

Caution : On some newer model cars, a plastic safety coating has

been applied to the windshield. The suction cups may leave
permanent marks on the windshield once they are removed.
Check your vehicle owner’s manual to see if your car has
the plastic safety coating.

5