Rocky Mountain Radar RMR-C475 User Manual

SCRAMBLER IS DE-ACTIVATED

RMR-C475

Radar and Laser Detector

Radar and Laser Scrambler

Owners Manual

SPECIFICATIONS:

Radar & Laser Detector:

Frequencies: 10.525 GHz

24.125 GHz
33-36 GHz

904 Nano-meter

Sensitivity: X-112 Dbm
K-110 Dbm
Ka-wide-102 Dbm
Laser < 200 nano-watt

Alarm: Separate for each Band
Variable alarm for Range
Controls: Volume, On/Off, Voice, Language,
Tone, Mute, City/Highway, Test,
Scrambler, All Reset

VG-2, VG-3: Frequency Plan

Size: 1.4” x 3.0” x 4.4”

The RMR-C475 model is a full-featured radar and
laser detector. It detects 360° radar and laser. The
radar detector is a dual conversion scanning
superheterodyne receiver with separate alarms for
each of the radar bands, city/highway and mute
select. It detects front and rear laser and radar.

Other:

1-Year Ticket Rebate Program and a 3-Year
Warranty

This product has been designed and certified to
comply with Part 15 of the FCC Rules. Any
changes or modifications not expressly approved
by Rocky Mountain Radar may void your
authority to use this product. Operation is subject

to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
Radar detectors are not legal in Washington D.C.,
Virginia or most provinces in Canada.

1

Installation:

Registration card within 30 days from the date of
purchase.

unit. Align the edge on the bracket with the slot
opening on the front of the case. Slide the bracket
gently into the case until it locks into place.

portion of the windshield. The ideal position will be
right below the rearview mirror. Press suction cups
firmly against windshield to adhere suction cups.
Note: Tinted glass will degrade the laser
performance.

in a level position.

the bracket and must have an unobstructed view of
the road ahead.

6) Insert the small end of the power cord gently into
the power jack on the left side of the unit and the
large end into the cigarette lighter receptacle.

Remote mounting is not recommended.

Hard wire: Remove cigarette lighter plug. Connect

the red wire to +12 Volts, and connect the white
wire to ground. If your power cord has a dashed
white stripe then connect this white stripe wire to
ground and solid black wire to +12 Volts.

2

CONTROLS: There are 3 buttons on top of the
RMR-C475: Light/Menu, Mute/Select and City.

Light: Press the Dim button for a split second
(momentary contact) to select blue backlit on, Auto
Dark or Dark. If unit is in Auto Dark mode it will
light up for 5 seconds when a signal is present or
when any button is pressed then go Dark mode
when no signal is present. If the unit is in Dark
mode the blue backlit is off. If the unit is in Dark
mode the Mute mode cannot be engaged.

Menu: Press and hold the Menu button down for
an extended period of time (approximately 3 to 5
seconds) to go into Menu mode. When Menu mode
is displayed press and release in step increments
then press Select button to change the setting in
Menu mode. The menu items are: Voice on/off,
English voice/Spanish voice, High tone/Low tone,
VG2, Scrambler on/off, Test on/off, All Reset. If
All Reset is selected Cleared is displayed and all
settings go to factory default. If any button is
pressed for more than 3 seconds or no button is
pressed after 5 seconds at Menu mode the current
settings are stored and exits automatically while

Exit is displayed. During the start up sequence the
current menu settings are displayed. The factory
settings are: Backlit on, Highway, Mute off, Voice
on, English voice, High tone, VG-2 on, Scrambler
off, Test on.

Mute: Press the Mute button for a split second

(momentary contact) to select “Mute On”, “Auto

Mute”, or “Mute Off”, Mute On mode mutes the

voice and beeping sounds. Auto Mute mode will
alarm 4 times then go into mute mode but the
display will keep blinking.

City: Engage the City function to reduce false
alarms in high RF noise areas. City function has 3
levels of sensitivity, City 1, City 2, and Highway
mode. Press the City button for a split second

(momentary contact). With City 1 mode “X” Band

will be turned off and K – Ka sensitivity will

remain 100% active. City 2 mode “X” Band will

remain off and K – Ka sensitivity will reduce to
50% sensitivity. Highway mode has all bands at
100% sensitivity.
3