Rocky Mountain Radar RMR-C430 User Manual

RMR-C430

Radar and Laser Detector

Radar and Laser Scrambler

Owners Manual

SPECIFICATIONS:

Radar & Laser Detector:

Frequencies: 10.525 GHz

24.125 GHz
33-36 GHz
904 Nano-meter

Sensitivity: X-112 Dbm
K-110 Dbm
Ka-wide-102 Dbm
Laser < 200 nano-watt

Alarm: Separate for each Band
Variable alarm for Range

Controls: Volume, On/Off, Dim, Mute,

City/Highway, Test

VG-2: Frequency Plan

Size: 1.4” x 3.0” x 4.4”

The RMR-C430 detector is a full-featured radar and
laser detector. It detects 360° radar and laser.

The radar detector is a dual conversion scanning
superheterodyne receiver with separate alarms for
each of the radar bands, dim function, city/highway
and mute select. It detects front and rear laser and
radar.

Other:

One-Year Ticket Rebate Program
Three-Year Warranty

This product has been designed and certified to
comply with Part 15 of the FCC Rules. Any
changes or modifications not expressly approved
by Rocky Mountain Radar may void your
authority to use this product. Operation is subject

to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
Radar detectors are not legal in Washington D.C.
Virginia or most provinces in Canada.
2

Installation:

Registration card.

detector. Align the edge on the bracket with the slot
opening on the front of the case. Slide the bracket
gently into the case until it locks into place.

portion of the windshield. The ideal position will be
just below the rear view mirror. Then press firmly to
seat suction cups. Note: Tinted glass may degrade
the laser performance.

position.

bracket and must have an unobstructed view of the
road ahead.

6) Insert the small end of the power cord gently into
the power jack on the right side of the unit and the
large end into the cigarette lighter receptacle.

Remote mounting is not recommended.
Hard wire: Remove cigarette lighter plug. Connect

the black with white stripe wire to +12 Volts, and
then connect the solid black wire to ground.

3

CONTROLS: There are 3 buttons on top of the
RMR-C430, Dim, Mute and City.

Dim: Press the Dim button for one second to dim
the alarm lights. There are 3 levels of brightness. To

brighten the alarm lights press the dim button again.

Mute: Press the Mute button for one second to
disable the alarm speaker for quiet operation. To
reactivate the alarm speaker press the Mute button
again for one second.
City: Press the City button for one second to reduce
false alarms in high RF noise areas. The yellow City
light will illuminate to show activation.

Reminder! The RMR-C430 will memorize the
settings of the features above when the unit is
powered off. Be sure to readjust the settings to
your normal preferences.

Power and Volume: Power is provided through the

thumb wheel switch on the left side of the unit.
Rotate the wheel forward to turn on and increase the
volume for the alarm.

Rocky Mountain Radar does not condone the use
of excessive speed on the highways, nor does it
endorse breaking the speed limit laws of the
United States of America. Please drive safely
when using this or any other electronic product
in your car.

4