Rockwell Automation 140G-N-ECM User Manual [en, es]
140G-N-ECM, 140G-N-ECM4
Front terminals for 140G-N, 140G-NS
Terminali anteriori
Vorderseitige Anschlüsse
Prises avant
Terminales frontales
Installation - Installazione - Instalación
Instalação - -
WARNING:
installing or servicing. Install in suitable enclosure. Keep free from contaminants.
(Follow NFPA70E requirements).
AVVERTENZA:
manutenzione. Installare in custodia idonea. Tenere lontano da contaminanti.
(Seguire i requisiti NFPA70E).
WARNUNG:
Vermeidung von elektrischen Unfällen trennen. Die Geräte müssen in einem
passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden. (Befolgen
Sie die Anforderungen nach NFPA70E).
AVERTISSEMENT:
secteur pour éviter toute décharge. Prévoir une mise en coffret ou armoire appropriée.
Protéger le produit contre les environnements agressifs. (Vous devez respecter la
norme NFPA70E).
ADVERTENCIA:
del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una caja apropiada.
Manténgalo libre de contaminantes. (Cumpla con los requisitos NFPA70E).
ATENÇÃO:
instalação ou a manutenção. Instalar em caixa apropriada. Manter livre de
contaminantes. (Cumpra as exigências da norma NFPA70E).
To prevent electrical shock, disconnect from power source before
Per prevenire infortuni, togliere tensione prima dell'installazione o
Vor Installations- oder Servicearbeiten Stromversorgung zur
Avant le montage et la mise en service, couper l'alimentation
Desconéctese de la corriente eléctrica, antes de la instalación o
Para evitar choques, desconectar da corrente elétrica antes de fazer a
CH 8 mm
Bul. 140G
3p 4p
3 (6) 4 (8)
3 (6) 4 (8)
6 (12) 8 (16)
6 (12) 8 (16)
140G-N
140G-NS
2
1
21
1
2
160 lb-in
18Nm
4
10 - 15 mm
(0.4” - 0.6”)
3
1
CH 8 mm
DIR 1000529R0803 (L3869)
2
4
20 mm
(0.78”)
2
160 lb-in
18Nm
1
CH 8 mm
3
3
16 mm (0.62”)
±0.1
25
±0.004”
(0.98”
0.55” max
MAX 14 mm
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Ø11 mm
(0.43” diameter)
)
MAX 20 mm
(0.78” max)
MIN 10 mm
(0.4” min)
MAX 50 mm
(1.96” max)
Publication -140G-IN061A-MU-P April 2013
DIR 1000529R0803 (L3869)
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Loading...