Rockwell Automation 140G-M-ECM User Manual [en, es]
140G-M-ECM, 140G-M-ECM4
Front terminals for 140G-M
Terminali anteriori
Vorderseitige Anschlüsse
Prises avant
Terminales frontales
Installation - Installazione - Instalación
Instalação - -
WARNING:
installing or servicing. Install in suitable enclosure. Keep free from contaminants.
(Follow NFPA70E requirements).
AVVERTENZA:
manutenzione. Installare in custodia idonea. Tenere lontano da contaminanti.
(Seguire i requisiti NFPA70E).
WARNUNG:
Vermeidung von elektrischen Unfällen trennen. Die Geräte müssen in einem
passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden. (Befolgen
Sie die Anforderungen nach NFPA70E).
AVERTISSEMENT:
secteur pour éviter toute décharge. Prévoir une mise en coffret ou armoire appropriée.
Protéger le produit contre les environnements agressifs. (Vous devez respecter la
norme NFPA70E).
ADVERTENCIA:
del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una caja apropiada.
Manténgalo libre de contaminantes. (Cumpla con los requisitos NFPA70E).
ATENÇÃO:
instalação ou a manutenção. Instalar em caixa apropriada. Manter livre de
contaminantes. (Cumpra as exigências da norma NFPA70E).
To prevent electrical shock, disconnect from power source before
Per prevenire infortuni, togliere tensione prima dell'installazione o
Vor Installations- oder Servicearbeiten Stromversorgung zur
Avant le montage et la mise en service, couper l'alimentation
Desconéctese de la corriente eléctrica, antes de la instalación o
Para evitar choques, desconectar da corrente elétrica antes de fazer a
Bul. 140G/140MG
3p
3 (6) 4 (8)
CH 6 mm
6 (12)
8 (16)
4p
1
CH 6 mm
79.6 lb-in
9 Nm
2
Ø ()0.25" 6.5mm
22.5 0.1±
(0.88 0.004)±
6 (12)
8 (16)
min ( )0.70" 18mm
max ( )0.47" 12mm
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication -140G-IN038A-MU-P April 2013
min ( )0.19" 5mm
max ( )0.39" 10mm
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
max ( )1.57" 40mm
DIR 1000479R0821 (L2358)
Loading...