Rocktron VFS1 User Manual

VFS1

FOOTSWITCH

Congratulations and thank you for yourpurcahse of the Rocktron VFS1 Footswitch. Although the VFS1
has many uses, it is mainly used to switch channels or turn effects on/off on your guitar amplifier

Descriptions:

The LED ON/OFF status changes each
time you press the switch. Press the switch
once to activate (LED turns ON). Press the
switch once more to deactivate (LED turns OFF)

Guitar

Output

A 9-Volt Battery powers the LED’s and is
accessable through the battery compartment
located on the bottom of the VFS1.

Footswitch Jack
on back of amp

Use a standard 1/4” mono guitar cable to
make the connection from the pedal to the
footswitch jack on your amplifier or rack unit.

Use the VFS1 to change channels on your
amplifier or turn ON/OFF effects. It can also
be used as a switcher between amplifier and
rack systems, or as a switcher between two
amplifiers or an amp and a rack.

FOOTSWITCH JACK

USE A STANDARD

1/4” MONO GUITAR

ON/OFF LED

CABLE

Amp
Input

VFS1

Gainaic 2

Footswitch

Input

Footswitch

Jack

FOOTSWITCH

VFS1

FOOTSWITCH

ON/OFF SWITCH.

PRESS TO ACTIVATE

(ON/OFF). WHEN “ON” LED

WILL BE “LIT”.

VFS1

Footswitch

Input

FOOTSWITCH