RocketFish RF-WHTIB User Manual

Universal Wireless Rear Speaker Kit
RF-WHTIB-A
User Guide
Before using your new product, please read these instructions to prevent any damage.
Rocketfish RF-WHTIB-A
Kit

Contents

Introduction............................................................................................. 2
Features..................................................................................................... 5
Setting up your wireless rear speaker kit...................................... 8
Using your wireless rear speaker kit..............................................14
Troubleshooting...................................................................................16
Specifications ........................................................................................18
Legal notices..........................................................................................18
One-Year Limited Warranty..............................................................21

Introduction

Congratulations on your purchase of a Rocketfish RF-WHTIB-A Universal Wireless Rear Speaker Kit. Your Wireless Rear Speaker Kit represents the state of the art in wireless speaker kit design, and is designed for reliable and trouble-free performance.
This manual explains how to correctly install, operate, and get the best performance from your wireless rear speaker kit. Read this user guide carefully before installing your system, then keep it near your system for quick reference.
Your Universal Wireless Rear Speaker Kit uses a proprietary 2.4 GHz wireless communication system to transmit low-latency, high fidelity audio to a stereo amplifier, providing a superior level of audio quality and resistance to interference.
The system accepts speaker-level inputs, and is compatible with a complete range of multichannel home theater receiver systems or home theater receivers.
2

Safety information

CAUTION:
TO REDUCE THE RISK OF
ELECTRIC
SHOCK, DO NOT REMOVE
COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

RF-WHTIB-A

Important Safety Instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
3
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional safety information

• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• The AC power plug or an appliance coupler is used as the disconnect device. This disconnect device shall remain readily operable.
• Read the Rating Labels on the bottom of the sender and receiver for power input and other safety information.
4

Features

• 2.4 GHz wireless sender and wireless receiver
• Transmits high quality audio over a radio frequency communication link
• Compact size
• Hidden antennas
• Low power consumption

Package contents

Examine the contents of the box for your Universal Wireless Rear Speaker Kit. The box should contain:
• Wireless sender
• Wireless receiver
• Power adapter (for the wireless sender)
• Power cord (for the wireless receiver)
• 2-foot speaker wires (2)
User Guide
• Quick Setup Guide
RF-WHTIB-A
5

Wireless sender

1
42
3
5
7
6
Front view
Back view
Bottom view
# Feature
1Power indicator LED 2 Right speaker input terminals 3 Left speaker input terminals 4 DC IN jack 5Power switch 6 CONNECT button 7 Hanging holes for wall mounting the wireless sender.
6

Wireless receiver

Front view Back view
Bottom view
RF-WHTIB-A
100-240V~50/60Hz
1
7
# Feature
1Power indicator LED 2 Volume control knob 3 Left speaker output terminals 4 Right speaker output terminals 5AC IN jack 6 Power switch 7CONNECT button 8 Hanging holes for wall mounting the wireless receiver.
2
8
4
53
6
7

Setting up your wireless rear speaker kit

Left speaker
Right speaker
Center speaker
Home theater receiver
Wireles s Sender
Wireless Receiver
Right rear
Left rear
The following diagram shows a typical home theater setup using the Wireless Rear Speaker Kit. The following sections provide further details on how to setup and operate this product.
8

Connecting the wireless sender

Wireless sender back panel
Home theater receiver back panel
Press and hold
Release

Connecting the sender to the home theater receiver

RF-WHTIB-A
To connect the home theater receiver to the wireless sender:
1 Using the included 2-foot speaker cords, connect the right
Caution: Turn off your home theater receiver while connecting the units.
rear speaker terminals of your home theater receiver to the right speaker terminals of the wireless sender by connecting the red wire to the red (+) terminals, and the black wire to the black (-) terminals.
9
2 Connect the left rear speaker terminals of the home theater
Wireless sender back panel
Connecting the power adapter
receiver the same way.
Notes:
Make sure that the exposed tips of the speaker wire do not touch each other, and that they are fully inserted into the terminals.
Speaker wire colors may vary with different speaker systems. Make sure you connect your home theater receiver using the
rear speaker terminals only.

Connecting the wireless sender to the power adapter

The power adapter can be connected to a power outlet or the SWITCHED AC outlet of your home theater receiver. If you connect it to the SWITCHED AC outlet of your home theater receiver, each time you turn your home theater receiver on or off, the wireless sender is also turned on or off.
10
Caution: To avoid risk of fire, and to prevent damage, only use the power adapter supplied with your wireless rear speaker kit.

Connecting the wireless receiver

100-240V~50/60Hz
Left rear speaker
Right rear speaker

Connecting the wireless receiver to your rear speakers

To connect the rear speakers to the wireless receiver:
1 Connect the right speaker to the right speaker terminals of
the wireless receiver, and the left speaker to the left speaker terminals.
2 If the speakers have wires instead of terminals, connect the
positive (+) wire from the right speaker to the red (+) terminal for the right speaker on the wireless receiver and the negative (-) wire from the right speaker to the black (-) terminal for the right speaker on the wireless receiver.
3 Connect the left speaker the same way.
Notes:
For speaker wires that have proprietary connectors, you may strip the end of the wires to allow connection to the wireless receiver. However, check with the speaker manufacturer before doing this, as it may void the warranty.
Make sure that the exposed tips of each speaker wire do not touch each other, and that they are fully inserted into the terminals.
RF-WHTIB-A
11

Connecting the wireless receiver to the power cord

Connecting the power cord
100-240V~50/60Hz
To connect the wireless receiver to the power cord:
Note: Plug the power cord in only after all speakers are
connected to the wireless receiver.
1 Plug the small (female) end of the power cord into the AC
100V-240V~50/60Hz jack on the back of the wireless receiver.
2 Plug the large (male) end of the power cord into a power
outlet.
12
RF-WHTIB-A
2 5/8 inches
(67 mm)

Placing the wireless sender and wireless receiver

The wireless sender and wireless receiver must be separated by at least 12 inches and be within 100 feet of each other for linked operation.
To avoid risk of electric shock and fire, and to prevent damage, locate the wireless sender and wireless receiver units with no obstructions in front.

Wall mounting the wireless sender and wireless receiver (optional)

The hanging holes for wall mounting both the wireless sender and wireless receiver are 2 5/8” (67 mm) apart.
Note: If you need to mount the wireless sender or wireless receiver on a wall, install it against the wall so that cool air can travel through the ventilation slots in the unit and come out the top.
13

Using your wireless rear speaker kit

Blinking LED
Blinking LED

Establishing communications between the wireless sender and wireless receiver

To turn on the System:

1 Turn on the power switch on the back panel of the wireless
sender. The LED indicator blinks to indicate that the wireless sender is plugged in.
2 Turn on the power switch on the back panel of the wireless
receiver. The LED indicator blinks to indicate that the wireless receiver is plugged in.
14
The wireless sender and wireless receiver were pre-paired at the factory. When an active link is established between them, the LED indicators turn solid.
Note: In case the indicators continue to blink after 30 seconds, it means there is no active link between the wireless sender and wireless receiver. Try to connect the system manually using the CONNECT button. For more information, see “Troubleshooting” on page 16.

Listening to the system

To listen to the system:

1 Turn on the system. Make sure that there is an active link
between the wireless sender and wireless receiver.
2 Turn on your home theater receiver, then play the audio or
video source through your home theater receiver.
The volume control on the wireless receiver is only used to adjust the balance of the volume between the front and rear speakers. After the system is set up, we recommend that you adjust the volume balance one time.

To adjust the volume balance:

1 Turn on the wireless sender and wireless receiver, then turn
on the home theater receiver and adjust it to your normal listening level.
2 Adjust the volume on the wireless receiver, using the volume
control knob, to balance the front and rear speakers. After the volume of the wireless receiver is set up, always
adjust the volume using the volume control on your home theater receiver whenever needed.
RF-WHTIB-A

To turn off the system:

1 Turn off the power switch on the back of the wireless sender.
The LED indicator turns off.
2 Turn off the power switch on the back of the wireless
receiver. The LED indicator turns off.
15

Optimizing your surround sound

The Rocketfish Universal Wireless Rear Speaker Kit uses state-of-the-art 2.4 GHz technology to digitally send audio data from the wireless sender to the wireless receiver. Wireless links create a small latency between the wireless sender and wireless receiver, and many home theater receivers let you adjust the delay between the various speakers in your surround system. To optimize your system when tuning your speaker setup, we suggest that you shorten the delay to the rear speakers by 15-20 ms.

Troubleshooting

Please read this User Guide carefully before using your wireless rear speaker kit. Check this list for a possible troubleshooting solution before calling for service. Refer to rocketfishproducts.com for additional information.
Problem Solution
No sound
• Check to see if the LEDs illuminate on the front of both the wireless sender and wireless receiver units. If the LEDs are lit solidly, the communication is working correctly and all speaker wires and the home theater receiver operation should be checked. If the LEDs are flashing, refer to the “No communication between the sender and receiver” section below.
• Make sure that the speaker wire connections are correct and secure.
• Make sure that the wireless sender and wireless receiver are both connected to a working power outlet.
• Make sure that the home theater receiver is turned on.
• Make sure that the correct input is selected on your home theater receiver.
• Turn up the volume on the home theater receiver.
• Depending on what you are listening to, audio may not always play from the rear speakers.
16
Problem Solution
Sound interference
No communication between the sender and receiver
• Move the wireless sender and wireless receiver slowly to find the best reception position for your system.
• Shorten the distance between your wireless sender and wireless receiver. The maximum distance is 100 feet.
• Other devices, such as cordless phones or microwaves, may cause interference with the wireless sender and wireless receiver. Try turning off one device at a time to determine which device is causing interference. Make sure the wireless sender is more than 18 inches away from any Wi-Fi routers.
• Make sure that the power cords are connected correctly.
• After the power switches have been turned on on both the wireless sender and wireless receiver, the front panel LEDs should light. If they are solidly on, a communication link has been successfully established between the units. If they are flashing on one or both units, press and hold the CONNECT button on either the wireless sender or wireless receiver for two seconds. (Both the wireless sender's and the wireless receiver's CONNECT buttons are on the bottom.) This will put the unit into the “connection mode” for about 30 seconds. During this period the CONNECT button on the other unit must also be pressed for two seconds so that it will also enter “connection mode.” The system proceeds with the connection process between the wireless sender and wireless receiver. While in “connection mode,” the LED indicators blink at a faster rate. When an active link is established between the wireless sender and wireless receiver, the LED indicators will be solid on and will not blink.
Note: Tr y p ressi ng t he CONNEC T buttons again if the LED indicators keep blinking after 30 seconds.
RF-WHTIB-A
17

Specifications

Wireless sender

Audio Input: Stereo, speaker-level
Audio Output: Wireless Supply voltage Transmission Delay

Wireless receiver

Audio Input: Wireless
Audio Output: High Efficiency Class D, Speaker-level
Transmission Delay Power Supply

Legal notices

FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
• Maximum audio input signal: 11 V RMS into 120 ohms
• Stereo, 16-bit, 48 KHz uncompressed
•5V
• 15-20 ms
• Stereo, 16-bit, 48 KHz, uncompressed
• Signal-to-Noise Ratio: 87 dB
• Supports 4 to 16 ohm speakers
• Audio output power: 2 × 30 W (RMS) into 4 ohms (no more than 10% THD)
• 15-20 ms
• AC 100-240 V ~ 50/60 Hz
18
RF-WHTIB-A
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
19

Copyright

© 2013 Rocketfish. Rocketfish and the Rocketfish logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to change without notice or obligation.
For service and support call (800) 620-2790.
20

One-Year Limited Warranty

Rocketfish Products (“Rocketfish”) warrants to you, the original purchaser of this new RF-WHTIB-A (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for one (1) year from the purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Rocketfish brand products and packaged with this warranty statement. This warranty does not cover refurbished Product. If you notify Rocketfish during the Warranty Period of a defect covered by this warranty that requires service, terms of this warranty apply.

How long does the coverage last?

The Warranty Period lasts for one year (365 days), beginning on the date you purchased the Product. The purchase date is printed on the receipt you received with the product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Rocketfish repair center or store personnel, Rocketfish will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Rocketfish and are not returned to you. If service of Products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Rocketfish Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.
RF-WHTIB-A

How to obtain warranty service?

If you purchased the Product at a retail store location, take your original receipt and the Product to the store you purchased it from. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from an online web site, mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging.

Where is the warranty valid?

This warranty is valid only to the original purchaser of the Product in the United States, Canada, and Mexico.
21

What does the warranty not cover?

This warranty does not cover:
• Customer instruction
•Installation
•Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
•Accident
•Misuse
•Abuse
•Negligence
• Commercial use
• Modification of any part of the Product, including the antenna
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility authorized by Rocketfish to service the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. ROCKETFISH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Rocketfish: For customer service please call 1-800-620-2790
www.rocketfishproducts.com
22
RF-WHTIB-A
Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645 © 2013 Best Buy Enterprise Services, Inc. All rights reserved. ROCKETFISH is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
23
www.rocketfishproducts.com (800) 620-2790
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
© 2013 BBY Solutions, Inc.
All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc.
All other products and brand names are trademarks of their respective owners.
V2 ENGLISH 13-0050
Loading...