RocketFish RF-HSWM1A18, RF-HSWM1A18W, RF-HSWM1A18-C, RF-HSWM1A18W-C User Manual
Multi-Directional
Speaker Mount
RF-HSWM1A18 / RF-HSWM1A18W / RF-HSWM1A18-C /
RF-HSWM1A18W-C
For wood-stud, drywall, and concrete wall
installations
ASSEMBLY GUIDE
Before using your new product, please read these instructions to prevent any damage.
Safety information and specifications................................. 2
Tools needed................................................................................ 3
Package contents: parts ........................................................... 4
Package contents: hardware................................................... 4
Installation instructions............................................................ 5
Safety information and specifications
Compatible speakers: Sonos PLAY: 1 or
PLAY 3, and other wireless speakers
Maximum speaker weight: 10 lbs. (4.5 kg)
Overall dimensions (H × W × D):
3.83 x 2 in. (9.73 x 5.08 cm)
Wall-mount weight: 0.5 lbs. (0.2 kg)
We’re here for you
www.rocketfishproducts.com
For customer service, call:
1-800-620-2790 (U.S. and Canada) or
01-800-926-3010 (Mexico)
3.83" (9.73 cm)
2” (5.08 cm)
IMPORTANT
SAFETY
INSTRUCTIONS
- SAVE THESE
INSTRUCTIONS
Check your speaker’s user
manual to see if there are
any special requirements for
mounting your speaker.
Please read through these
instructions completely to
be sure you’re comfortable
with this easy installation
process.
Do not use this product for
any purpose not explicitly
specified by the
manufacturer.
The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
The wall must be capable of supporting five times the weight of the speaker and mount
combined.
If you do not understand these instructions or have doubts about the safety of the installation,
assembly or use of this product, contact Customer Service.
WAR NIN G: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing
or damaged, do not return the damaged item to your dealer; contact Customer Service. Never
use damaged parts!
2
Need help? Call 1-800-620-2790 (U.S. and Canada) or
01-800-926-3010 (Mexico)
RF-HSWM1A18 / RF-HSWM1A18W / RF-HSWM1A18-C / RF-HSWM1A18W-C
Pencil
Edge-to-edge
stud finder
Level
Phillips screwdriver
Drill
1/8” (3 mm) wood
drill bit
Hammer
Wood stud installation
1/4” (6.5 mm)
masonry drill bit
Concrete installation
1/4” (6.5 mm)
drywall drill bit
Drywall installation
Tap e
Hammer
Tools needed
You will need the following tools to assemble your new speaker mount:
Need help? Call 1-800-620-2790 (U.S. and Canada) or
01-800-926-3010 (Mexico)
3
Package contents: parts
A Mount (1)
D Bracket (1)
C Wall plate (1)
B Cap (1)
The mount (A), cap (B), and wall
plate (C) come already assembled.
Push the cap off the mount, then
slide the wall plate out to
disassemble.
PLAY: 3 INTERFACE
SCREW
WALL PLATE SCREW
PLAY:1 / PLAY:3 SCREW
(also used to mount
other wireless speakers)
ANCHOR
Make sure that you have all the parts necessary to assemble your new speaker
mount:
Package contents: hardware
Make sure that you have all the hardware necessary to assemble your new speaker
mount. Not all hardware included will be used.
Hardware Bag
Label Hardware Qty.
E1
F2
G1
H2
4
Need help? Call 1-800-620-2790 (U.S. and Canada) or
01-800-926-3010 (Mexico)
RF-HSWM1A18 / RF-HSWM1A18W / RF-HSWM1A18-C / RF-HSWM1A18W-C
Installation instructions
STEP 1 - Select a mounting option
You can mount your speaker to three wall types:
• Option A: To mount to a wood stud wall, see “STEP 2 - Option A:
Installing on a wood stud wall” o n p a g e 6.
• Option B: To mount on drywall, see “STEP 2 - Option B: Installing on
drywall“ on page 8.
• Option C: To mount on concrete or a concrete block wall, see “STEP 2 -
Option C: Installing on a solid concrete or concrete block wall“ on page
10.
Need help? Call 1-800-620-2790 (U.S. and Canada) or
01-800-926-3010 (Mexico)
5
STEP 2 - Option A: Installing on a wood stud wall
CAUTION
• Drywall covering the wall must not exceed 5/8"
(16 mm).
• The wood stud must not be smaller than a nominal
2 x 4 in. (51 x 102 mm) actual 1-1/2 x 3-1/2 in. (38 x
89 mm)
• Make sure that you drill at the center of the stud.
1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder.
2 Position the wall plate (C) at your desired height and line up the holes with your
stud center line. Level the wall plate and mark the hole locations.
6
Need help? Call 1-800-620-2790 (U.S. and Canada) or
01-800-926-3010 (Mexico)
RF-HSWM1A18 / RF-HSWM1A18W / RF-HSWM1A18-C / RF-HSWM1A18W-C
1-3/4 in. (45 mm)
1/8 in.
3 mm)
Pencil
Drill
Phillips screwdriver
Edge-to-edge
stud finder
1/8” (3 mm) wood
drill bit
(F) Wall plate screw
(2)
(C) Wall plate
3 Drill pilot holes to a depth of 1-3/4 in. (45 mm) using a 1/8 in. (3 mm) diameter
drill bit. Make sure that you drill into the center of the stud.
4 Attach the wall plate with the two wall plate screws (F). Tighten the screws only
until they are flush against the wall plate.
If needed, you can make small level adjustments to the wall plate, by loosening
the bottom screw and shifting the wall plate until it is level. Tighten the bottom
screw when adjustments are complete.
You’ll need
CAUTION
Both screws must be firmly tightened to prevent
unwanted movement of the wall plate. Ensure the
wall plate is securely fastened to the wall before
continuing on to the next step.
Need help? Call 1-800-620-2790 (U.S. and Canada) or
01-800-926-3010 (Mexico)
7
Loading...