RF-GXBX1202
Kinect™ Tripod Starter Kit
CAUTION:
• Do not disassemble any of the components. Refer all servicing to qualied personnel
only.
• Do not place or store the product in a humid area, and do not expose it to water or rain.
• Use the product only as instructed. Read all instructions before operating the product.
• Failure to follow these directions may void the warranty.
• Use this product for Xbox® 360™ Kinect™ only
• Don’t lean on or put additional weight on the tripod stand.
Package contents:
Kinect USB extension cable
Setting up your tripod
1 Screw the Kinect base onto the top of the tripod.
2 Adjust the screw beneath the tripod head to secure the Kinect base.
QUICK SETUP GUIDE
Kinect base
Mini Kinect tripod
Required tools:
• Phillips screwdriver
Features
• Compatible with Xbox® 360™ Kinect™
• Kinect USB extension cable increases Kinect placement range
• Mini Kinect tripod for exible placement of the Kinect in your playing space
• Kinect base attaches to the Mini Kinect tripod
3 To adjust the tripod height, adjust the screw in the middle of the tripod to extend the
main post or open the clips to extend the tripod legs. Close the leg clips once you have
extended the legs to the desired length.
LOCK
Screw
Clip
Note: Make sure the clip or screw is secure after adjustment.
5 Push in the side clips and place the Kinect onto the Kinect base. Then release the
side clips to lock the Kinect to the Kinect base.
Kinect
Caution: Make sure the Kinect is locked securely locked into place after you move
the tripod to its nal location.
6 See your Kinect manual for information on the best working range and location
for the Kinect.
Using the Kinect extension cable
• Connect the extension cable to the Kinect cable and to the Xbox® 360™ console.
Important safety instructions
• Make sure that all levers, handles, knobs, and leg locks are correctly tightened, and
that all three legs are fully opened before use.
• Do not carry or transport the tripod with camera equipment attached (for example:
over your shoulder or cradled in your arms)
• Do not store or expose your tripod to excessive heat or cold, or use near any ame
or re.
• Do not OIL or GREASE any part of the tripod.
• Do not use any solvents or thinners to clean your tripod. Use only a mild detergent
and wipe dry with a soft, lint-free cloth only.
• Do not exceed the load limit of this product.
90-day warranty
Visit www.rocketshproducts.com for details
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN 55423-3645 USA
© 2011 BBY Solutions, Inc., All Rights Reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand
names are trademarks of their respective owners.
ENGLISH 11-0830
4 Turn the side screw to loosen the handle, then use this handle to level the Kinect base.
USB extension cable