Robustel TPH6700 Installation And Configuration Quick Manual

-1-

TPH6700 IP67 PC/ABS Housing

Installation and Configuration Quick Guide

For R2000/R2000 Ent/R3000/R3000 Lite

-2-

About This Document

This document provides hardware information of the Robustel TPH6700 Housing, including introduction and installation.

Copyright© 2017 Guangzhou Robustel Technologies Co., Ltd.
All rights reserved.

Trademarks and Permissions

, are trademarks of Guangzhou Robustel Technologies Co., Ltd. All other trademarks and trade names mentioned in this

document are the property of their respective owners.

Disclaimer

No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject
to change without notice due to continued progress in methodology, design and manufacturing. Robustel shall have no liability for any error or damage of
any kind resulting from the use of this document.

Technical Support

Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.robustel.com

Introduction

-3-

Package Contents

Before installing your TPH6700 housing, please verify the kit contents as
following.

 1 x Robustel TPH6700 IP67 PC/ABS Housing

Optional Accessories (sold separately)

*If any of the above items is missing or damaged, please contact your
Robustel sales representative.

 AC power supply board

(not apply to R2000 Ent)
Input: 100-240 VAC, 0.5 A MAX, 50-60 Hz
Output voltage: +14 V@2 A
Output power: 28 W
Operating temperature: -40~+85 °C

 3G/4G antenna

Frequency range: 800-2700 MHZ
Impedance: 50 ohm
Weight: 0.2 kg

 GPS antenna

Impedance: 50 ohm
Length: 3 m

 Power supply cable (3/5 pin)

Transmission rate: 100 Mbps
Length: 2 m

 Wall mounting kit

Material: Aluminum
Dimensions: 185 x 180 x 30 mm

 Wi-Fi antenna

Frequency range: 2400-2483/5725-5850 MHZ
Impedance: 50 ohm
Weight: 0.2 kg

 Ethernet cable (4/8 pin)

Transmission rate: 100 Mbps
Length: 2 m

 Serial port cable (8 pin)

Transmission rate: 100 Mbps
Length: 2 m

 Pole mounting kit

Material: Stainless steel
Width: 12 mm

-4-

Product Overview

Item

Description

Metal

PC/ABS

Weight

1010 g

Dimensions

310 x 245 x 93.4 mm

Ingress protection

IP67

Standards for the housing

Fully detachable
Performance requirement for high and low temperature
Aging-resistance level (UL746C)
Flame-retardant level (grade 2 of UL746C)
Standard requirement for environment protection

Core plug—seal up these

unneeded interfaces for
protecting

Vent plug—applied to balance

differential pressure, protect
from dust and water, and
ventilate the enclosure

-5-

The interface of each housing model is slightly different. For more details in each model, see the following views.

R2000： R2000 Ent：

-6-

R3000： R3000 Lite：