Robot Coupe R2 Ultra Dice Service Manual

R 2 Dice R 2 Ultra Dice

Robot-coupe USA. Inc.

P.O. Box 16625, Jackson, MS 39236-6625 - 264 South Perkins St., Ridgeland, MS 39157

e-mail: [e-mail] - website: www.robotcoupeusa.com

Phone : [phone]

SUMMARY

ENGLISH

WARRANTY

IMPORTANT WARNING

INTRODUCTION TO YOUR NEW
R2Dice•R2Ultra Dice
BOWL CUTTER / VEGETABLE PREPARATION

SWITCHING ON THE MACHINE

• Advice on electrical connections

• Control panel

ASSEMBLY

• Bowl attachment

• Vegetable preparation attachment

OPERATING INSTRUCTIONS

• Bowl attachment

• Vegetable preparation attachment

CLEANING

• Motor base

• Attachments

MAINTENANCE

• Motor seal

• Blade

• Blades, plates and grids

• Bowl locking washer

SAFETY

TECHNICAL DATA

• Exploded views

• Electrical and wiring diagrams

3

ROBOT COUPE U.S.A., INC. LIMITED WARRANTY

YOUR NEW ROBOT COUPE
PRODUCT IS WARRANTED TO THE
ORIGINAL PURCHASER FOR A
PERIOD OF ONE YEAR FROM THE
DATE OF PURCHASE.

This LIMITED WARRANTY is against
defects in the material and/or
workmanship, and includes labor for
replacement of defective parts,
provided repairs are performed by
an authorized service agency (see
attached list).

The Customer must infor m the
Service Agency of the possibility of
warranty coverage and provide a
copy of the dated sales or delivery
receipt BEFORE W ARRANTY REPAIRS
ARE BEGUN.

Replacement parts and accessories
are warranted for ninety (90) days
from the date of purchase when
purchased separately and will be
verified by dated sales receipt OR
packing slip which lists that item.

All par ts or accessories replaced
under warranty must be returned to
the Service Agency.

THE FOLLOWING ARE NOT
COVERED BY THE ROBOT COUPE
U.S.A. INC. LIMITED WARRANTY:

Damage caused by abuse, misuse, drop-

1-

ping, or other similar damage caused by
or resulting from failure to follow assembly, ope­rating, cleaning, user maintenance or storage
instructions.

2-Labor to sharpen and/or replacements for

blades that have become blunt, chipped or worn
after a nor mal or excessive period of use.

3-Materials or labor to replace or repair

scratched, stained, chipped, pitted, dented or
discolored surfaces, blades, knives, attachments
or accessories.

4-Any alteration, addition, or repair that has

not been carried out by the company or an ap­proved service agency.

5-Transportation of the appliance to or from

an approved service agency.

6-Labor charges to install or test new

attachments or accessories (i.e., bowls, plates,
blades, attachments), which have been replaced
for any reason.

7-The cost of changing direction-of-rotation

of three-phase electric motors (Installer is
responsible).

8-SHIPPING DAMAGES. Visible and/or

hidden damage is the responsibility of the freight
carrier. The consignee must inform the carrier
and consignor immediately, or upon discovery in
the case of hidden defects.

KEEP ALL ORIGINAL CONTAINERS AND PAC­KING MATERIALS FOR CARRIER INSPECTION.

Neither ROBOT COUPE U.S.A., INC. nor its
affiliated companies or any of its distributors, di­rectors, agents, employees, or insurers will be
liable for indirect damage, losses, or expenses
linked to the appliance or the inability to use it.

The ROBOT COUPE U.S.A., INC. warranty
is given expressly and in lieu of all other
warranties, expressed or implied, for merchan­tability and for fitness toward a par ticular
purpose and constitutes the only warranty
made by ROBOT COUPE U.S.A., INC.

4

IMPORTANT WARNING

WARNING

KEEP THESE INSTRUCTIONS

IN A SAFE PLACE

WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to
misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will
help you get to know your appliance and enable you to use the equipment correctly. The operation manual should be kept within
easy access to all users for reference and should be read completely by all first time users of the machine.

UNPACKING

• Carefully remove the equipment from the packa­ging and take out all the boxes or packets contai­ning attachments or specific items.

• WARNING-some of the parts are very sharp e. g.
blades, plates … etc.

INSTALLATION

• We recommend that you install your machine on
a stable solid base at a comfortable working height.

CONNECTION

• Always check that your power supply corres­ponds to that indicated on the serial number plate
and that it is properly sized.

HANDLING

• Always wear cut-resistant gloves when handling
the cutting plates or the cutter blade.

ASSEMBLY PROCEDURES

• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.

USE

• Do not open the feed lead / attachment until
the motor has come to a complete stop.

• Never tamper with, or defeat the purpose of
the locking and safety systems.

• Do not put nonfood objects in the bowl or
vegetable prep openings.

• Always use the food pushers to push the product
into the vegetable preparation attachment openings.

• Do not leave the machine running unattended.

CLEANING

• Always unplug your machine before cleaning.

• Always clean the machine and attachments at
the end of each use.

• Never place the motor unit in water.

• For par ts made of aluminum alloys, use
cleaning detergents suitable for aluminum.

• For plastic parts, do not use detergents that are
too alkaline (i.e., containing too much caustic soda
or ammonia…).

Robot Coupe can in no way be held responsible
for the user’s failure to follow the basic rules of
cleaning and maintenance.

MAINTENANCE

• Always unplug the appliance before servicing.

• Check the seals regularly and ensure that the
safety devices are in good working order.

• It is particularly important to maintain and
check the attachments since cer tain products
contain corrosive agents e.g. citric acid.

• NOTICE
power cord or plug has been damaged.

• If the machine fails to operate as described in
this manual, or if the machine malfunctions in any
way, remove the machine from use and have it
serviced. Additionally, discard all food processed
at the time of the malfunction.

• Contact your local ROBOT-COUPE Authorized
Service Agency if something appears to be wrong.

: Never operate the appliance if the

ENGLISH

5

INTRODUCTION TO YOUR NEW
R 2 Dice •R2UltraDice

The R 2 Dice / R 2 Ultra Dice is a versatile machine
designed to meet your professional needs. It can
perform a number of tasks, as well as save much in
time and labor.

This food processor consists of a bowl assembly and
a vegetable preparation attachment. The 3 quart
bowl is used for chopping, grinding, pureeing,
blending, mixing, and kneading ingredients used in
most recipes.

A wide range of cutting plates are available for use
with the vegetable preparation attachment. Cutting
plates are available for slicing, waved slicing,
grating, pulping, julienne and dicing.

Its numerous functions will open the door to a whole
new culinary world.

Thanks to its simple design, all components
requiring frequent handling for maintenance or
cleaning can be easily assembled or removed.

All users should read this operation manual before
operating the machine.

• CONTROL PANEL

R 2 Dice / R 2 Ultra Dice

Red knob = Off switch
Green knob = On switch
Black knob = Pulse control

• BOWL ATTACHMENT

1) With the motor base
facing you, place the
bowl onto the motor
base with the handle
toward the front. Turn
the bowl just off-center
and to the left as you
lower it onto the base.

3) Place the blade onto
the motor shaft. Rotate
the blade until it drops
into place. The bottom
blade should be level
with and just of f the
bottom of the bowl.

ASSEMBLY

4) Note the plastic tab
on the bowl lid. Place
the lid on the bowl with
the tab turned to the
front and slightly to the
left of the bowl handle;
then, turn the lid back to
the right until it comes to
a stop with the tab over
the bowl handle.

The device is now ready for use.

• VEGETABLE PREPARATION ATTACHMENT

SWITCHING ON
THE MACHINE

• ADVICE ON ELECTRICAL CONNECTIONS

Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
serial number plate.

WARNING

This appliance must be plugged into a
grounded socket (risk of electrocution).

6

The vegetable preparation attachment consists of
two main detachable parts: the continuous feed
attachment and the continuous feed lead.

1) With the motor base
facing you, fit the conti­nuous feed attachment
onto the motor base; the
exit chute should be at
the rear of the machine.

2) Then, turn it back to
the right, (counterclock­wise) locking it onto the
motor base tabs.