Roberts Radio R9994 User Manual

R9994

LW/MW/FM STEREO

3-BAND RADIO

Sound for Generations

ROBERTS

Operating Instructions

Controls

1

6

2

1. Volume control

2. Waveband switch

3. Earphone socket

4. Speaker/on/off switch

4

5. Tuning control

6. Tuning indicator

7. Stereo indicator

8. Tuning scale

53

7

8

9

9. Speaker

1

Controls cont.

10

11

10. MW/LW switch

12

11. Belt clip

12. Battery compartment

If you need any further advice, please call our Technical Helpline on

020 8758 0338 (Mon-Fri)

2

Battery

To insert the batteries fi rst open the battery cover (12) by sliding it in
the direction shown by the arrow. Insert two LR03 ( AAA) size batteries
into the compartment. Ensure that batteries are inserted in accordance
with the diagrams shown inside the battery compartment.

• Reduced power, distortion and a ‘stuttering’ sound are all signs
that the batteries may need replacing.

• If the radio is not to be used for an extended period of time it is
recommended that the batteries are removed from the radio.

Aerials

The earphones act as an FM aerial when plugged into the earphone
socket. The earphone lead should be fully uncoiled for best reception.
There is a separate directional aerial built into the radio for MW and LW
reception. To achieve the best MW/LW reception, it may be necessary
to rotate the radio.

Loudspeaker on/off switch and earphones

Your radio may be operated using the built in loudspeaker or the
earphones supplied.

1. The built in loudspeaker may be switched on by sliding the
speaker/on/off switch to the speaker position.

2. When switched to FM and using the loudspeaker the enclosed
pig tail aerial should be inserted into the earphone jack.

3. To operate your radio via earphones, plug the earphones into
the earphone jack slide the speaker/on/off switch to the “On”
position.

3