Robertshaw ROUND ZONE DAMPERS User Manual

Robertshaw motorized round zone dampers are just
what you need for low-pressure zone control systems,
and they enhance airflow in any duct system. Our
dampers are designed for light commercial and
residential applications with static pressure systems
not exceeding 1.2” WG. All round zone dampers are
constructed of rolled galvanized steel with stiffening
ribs to maintain rigidity. A single steel offset blade is
attached to a 1-piece steel shaft connected with
nylon bearings for smooth operation. They are
powered by a single stall-type motor with 55 to 75
inch-ounces of torque.

Dampers can be wired with 2-wire or 3-wire
actuators. The 2-wire actuators are spring return with
a normally closed or normally open configuration. The
3-wire actuators are power open-power close in a
normally open configuration. The motor has a “lost
motion” braking system that prevents backlash and
shock to the motor gears, bearings and blade shaft
when the damper is driven open by the spring return.

PRODUCT DESCRIPTION

FEATURES AND BENEFITS

• Lightweight for easy installation

• Stiffening ribs maintain rigidity

• Nylon bushings provide smooth operation and
eliminate blade slippage

• Motor mount welded to shell for added sturdiness

• One piece solid steel shaft eliminates binding

• External minimum position adjust for easy accessibility

• External damper blade position indication

• Anti-backlash braking system prevents shock to system

• Single stall-type motor doesn't require switches

ROUND

ZONE DAMPERS

ITEM Round Damper

POWER REQUIREMENTS 24 VAC actuator

AMBIENT RATINGS 0˚F to 120˚F (-17˚C to 49˚C)

LEAKAGE Low leakage damper

STATIC PRESSURE RATING 1.2” WG

DIMENSIONS Round: 5”, 6”, 7”, 8”, 10”, 12”,

14”, 16”, 18”, 20” (NC up to 14”)
(13 cm, 15 cm, 18 cm, 20 cm,
25 cm, 31 cm, 36 cm, 41 cm,
46 cm, 51 cm)

Length: Diameter +3/4” wide
26-gauge galvanized steel

WEIGHT 2.7 lb. to 15 lb. (1.2 kg to 6.8 kg)

WIRING #18 gauge thermostat wire

ACTUATORS 2-wire, 2 position, spring return

(55 in-oz)
3-wire, 2 position, power open-power
closed (150 in-oz)

SHELL 26-gauge galvanized steel

BLADE 18-gauge galvanized steel

AXLE 3/8” diameter steel shaft

BEARINGS Nylon

ROBERTSHAW PANELS

• Classic panel: up to 2 zones 2701-006
up to 3 zones 2701-001

• Deluxe panel: up to 7 zones 2701-002

• Premier panel: up to 19 zones 2702-001

ROBERTSHAW DAMPERS

• Rectangular motorized zone dampers

• Round motorized zone dampers

• Bypass non-electric zone dampers

ROBERTSHAW THERMOSTATS

• Programmable thermostats

• Digital non-programmable thermostats

• Mechanical thermostats

Design Specifications

Robertshaw®Zone
Control Systems

Distributed by:

Ordering Information

ROUND

ZONE DAMPERS

ORDER NUMBER Ex. DAR-06E

TYPE Round Damper

SIZE 06 (05” to 20”)

ACTUATOR TYPE E2 (2-wire control)

E3 (3-wire control)

FAIL SAFE Blank (normally open)

NC (normally closed)

•

•

•

•

•

•

Climate Controls Americas

515 South Promenade Avenue
Corona California 92879-1736 USA
Telephone [phone] Facsimile [phone]
[e-mail]
Technical Service Telephone [phone]
Technical Service Facsimile [phone]
[e-mail]

www.icca.invensys.com
©2004 Climate Controls Americas 6/04 - #150-1576C