Roberts Gorden HE-100, HE-175, HE-125, HE-150, HE-80 User Manual

Vantage HE

Vantage HE

®

Quality in Any Language

TM

The Infrared Heater Designed for Harsh Environments

■ Effective in high moisture

environments due to durable

components

■ Burner box design with

protective enclosure for

controls minimizes exposure

to dirt and moisture from

combustion air

■ Approved for indoor and

outdoor installations

■ Design flexibility achieved

with broad range of burner

inputs and tube lengths

■ Diagnostic capability

incorporated in burner

design

A

C

D

B

A

C

D

B

VANTAGE®HE

Model HE-40 HE-60 HE-80 HE-100 HE-125 HE-150 HE-175

Length of Straight Tube (ft, in) A 10 20 20 30 40 50 60
Length of U-Tube (ft, in) B N/A 11,7 11,7 16,7 21,7 26,7 31,7
Overall Length of Straight Tube (ft, in) C 11,5.5 21,5.5 21,5.5 31,5.5 41,5.5 51,5.5 61,5.5
Overall Length of U-Tube (ft, in) D N/A 13,0.5 13,0.5 18,0.5 23,0.5 28,0.5 33,0.5

Input (Btu/h) x (1000) 40 60 80 100 125 150 175

Fuel Natural Gas (NG) or Propane Gas (LP)
Inlet Pressure (in wc) NG min. 4.6 4.6 4.6 4.6 4.6 4.6 5

LP min. 11 11 11 11 11 11 11

14 maximum for NG & LP
Gas Connection NPT 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
Electrical Supply 120 V, 60 Hz, 1 A (Run) 5 A (Start)
Heat Exchanger Tubing 10 ft Sections, 4" dia, 16 Gauge, First 10 ft ALUMI-THERM

®

Steel Tubing

(Remaining Heat Treated Aluminized Steel Tubing)
Exhaust Flue 4” dia
Reflector and End Caps .024 Stainless Steel Type 304 (Optional - .024 Aluminum)
Control System Honeywell

®

SmartValve® II Combines Gas Valve and Hot Surface Electronic Ignition Control

Fully Automatic, Four-Try, 100% Shut-Off, Prepurge, Auto Reset, LED Indicator Status
Approved As Indoor and Outdoor (Vented or Unvented)
Certification ANSI Z83.20/CSA 2.34, 2.17, 2.20
Warranty Three-Year Limited (Refer to Installation, Operation and Service Manual for Details)

Weights

Burner (lb) 40
Vent Cap Package Included (lb) 4

Overall Length of Tube and Accessory Packages (ft) 10 20 30 40 50 60

Aluminized Tube with Aluminum Reflector (lb) 52 86 120 161 206 240
Aluminized Tube with Stainless Steel Reflector (lb) 66 113 152 208 265 304

U-Tube Packages (lb)

Aluminized Tube with Aluminum End Caps 19
Aluminized Tube with Stainless Steel End Caps 20

Clearances to Combustibles* (in)

Model HE-40 HE-60 HE-80 HE-100 HE-125 HE-150 HE-175

Horizontal 45° Horiz. 45° Horiz.45° Horiz.45° Horiz.45° Horiz. 45° Horiz. 45° Horiz. 45°

A 6 8 6 8 6 8 6 10 6 10 6 12 8 12
B 278 358 388 408 468 508 52 8
C 5351 6360 6666 7174 7778 8084 82 85
D 2746 3554 3860 4064 4669 5074 52 79

Roberts-Gordon

1250 William Street
P.O. Box 44
Buffalo, NY 14240-0044 USA
Telephone: [phone]
Fax: [phone]
Toll Free: 800.828.7450

www.rg-inc.com

Roberts-Gordon

76 Main Street West
Unit 10
Grimsby, Ontario L3M 1R6 Canada
Telephone: [phone]
Fax: [phone]

European Office:

Roberts-Gordon
Telephone: [phone]
Fax: [phone]

Printed in U.S.A HESNA 5M 0205 Rev. E

©2005 Roberts-Gordon All rights reserved. No part of this work covered by the copyrights herein may be reproduced or copied in any form or by any means – graphic, electronic

or mechanical, including photocopying, recording, taping, or information storage and retrieval systems – without written permission of Roberts-Gordon.

Turbulator (some models)

Reflector

Overall Length C

17.5"

(44 cm)

Length A

13.5"

(34 cm)

9.5"

(24 cm)

Burner End View Side View Top View

Length B

Overall Length D

18"

(457 mm)

*Clearances B, C, D can be reduced by 50% for locations 25 ft (7m) or more downstream of the burner. For other mounting options and associated clearances,

complete installation, operation and service criteria, please see the current issue of the VANTAGE

®

HE Installation, Operation and Service Manual.

Installation Code: ROBERTS GORDON

®

products are to be installed only in accordance with local laws, codes and regulations, and only by a contractor qualified in the

installation and service of gas-fired heating equipment. This product is not for residential use.

Further Information: Applications, engineering and detailed guidance on systems design, installation and product performance is available through ROBERTS GORDON®North

American independent distributors. Please contact us for any further information you may require, including the VANTAGE

®

HE Installation, Operation and Service Manual.