Robert Bosch PK4R0 Users Manual

Re: Certification for Bosch Transmitter
Model/PN(s): 13502301, 13502302
FCC ID: PFJPK4R0
IC: 909C-PK4R0

The device under test is manufactured by the grantee (Bosch) and sold as an OEM
product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must
ensure the end-user has all applicable / appropriate operating instructions. When end-user
instructions are required, as in the case of this product, the grantee must notify the OEM
to notify the end-user.

Bosch will supply the following information to the reseller/distributor dictating what
must be included in the end user’s manual for the commercial product.

INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL

The following information must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID
numbers must be included in the manual if the device label is not readily accessible
to the end user. The compliance paragraphs below must be included in the user's
manual.

************************************************************************

FCC ID:PFJPK4R0

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that

may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party
responsible for compliance could void the user's authority to operate the equipment.

The term “IC:” before the radio certification number only signifies that Industry Canada
technical specifications were met.

************************************************************************

IC: 909C-PK4R0