RME QuadMic II Specifications
PRO LINE
QuadMic II
Professional 4-Channel
Mic to Line Preamplifier
QuadMic II
Excellent Signal to Noise Ratio, lowest harmonic distortions
and wide gain range make the QuadMic II a first choice for
superior studio recordings. QuadMic II is battery powerable
and thus excellent for remote applications.
Each of the 4 channels features balanced microphone and line
inputs with Neutrik XLR/TRS combo jacks, switchable 48V
phantom power, phase reversal and a low cut filter.
All channels are also equipped with LEDs for signal presence,
clip state, and activated phantom power. The input amplification can be set from 6 to 60 dB. The balanced line level output
signals are provided on the rear of the unit as four 6.3 mm
(1/4") TRS jacks.
A maximum balanced and unbalanced output level of +21
dBu makes the QuadMic II fully compatible to RME's converters and interface series having analog inputs.
The QuadMic II complements any RME system with line inputs
by adding external microphone inputs. Since the unit runs on
supply voltages from 9 to 18V DC, it can operate on virtually
any power source available, including batteries and rechargeable batteries.
I/O Connectivity & Features:
• 4 x Mic Preamp Inputs
• XLR/TRS Combo Input
• 4 x Line Outputs
• Phantom power per channel
• Low Cut per channel
• Phase reversal per channel
• DC powered, battery compatible
Specifications:
• Power supply: Operates with voltages ranging from 9-18V DC
• Operation with practically any DC power source, including
(rechargeable) batteries
• High-quality switching power supply included, for worldwide
operation at 100-240 Volt
• Max. input level XLR: +15 dBu
• Max. input level TRS: +21 dBu
• Max. output level: +21 dBu
• SNR: 129 dB EIN @ 150 Ohm
• THD: < 0.0005% @ 30 dB Gain
• Wide frequency response with special RF input filter
Worldwide Distribution
Phone: +49 (0) 8133 / 918170
www.audioag.com
www.rme-audio.com
Loading...