RME HDSPe RayDAT Specifications

HDSPe RayDAT
PCI Express Cards . MADE by RME
72-Channel ADAT/AES PCI Express Card
24 Bit/192 kHz . Performance without compromises
New features . Lowest latency . Lowest CPU load
The Hammer falls again.
RayDAT offers no less than 4 x ADAT optical I/O, SPDIF I/O and AES/EBU I/O. All 36 inputs and 36 playback channels can be routed and mixed independently, including S/PDIF (phono) and AES/EBU (XLR), which are simultaneously operational due to separated hardware and record/playback devices. On top, there are 2 MIDI I/Os and TotalMix, RME’s unsurpassed DSP­based real-time mixer/router, with hardware­calculated level metering and complete MIDI remote capability. RayDAT also supports the optional TCO Module for timecode support and word clock / video synchronization.
The card is equipped with SteadyClockTM, RME’s own clock technology, combining professional features like maximum jitter suppression at full varipitch capabilities and software controlled sample rates.
RME’s unique SyncCheck and AutoSync technology has evolved into the new Intelligent Clock Control of the HDSPe system. HDSPe RayDAT measures and displays the frequency of all clock sources - even word clock! Based on validity and current sample rate the system then decides which clock source should be used, fully automated and
performed in hardware. With this the HDSPe system offers the most easiest handling of the present clocks, although having a lot digital inputs, plus the most advanced support when configuring the clock setup.
The included DIGICheck for Windows turns the HDSPe RayDAT into a Spectral Analyzer, provides professional level meters for 2, 8, or 36 channels, offers Vector Audio Scope, Global Record Function and various other audio analysis tools.
RME’s secure flash update technology makes sure that firmware improvements, adjustments, and bugfixes can be installed easily at any time.
Some of the card’s unique features are:
All settings changeable in real time
Automatic, intelligent master/slave clock control
Enhanced Mixed mode: All inputs and outputs are simultaneously operational
Unsurpassed Bitclock PLL (audio synchronization) in ADAT mode
ZLM® (Zero Latency Monitoring) for latency-free submixes and perfect ASIO Direct Monitoring
S/MUX in hardware: 16 channels @ 24-
bit/96 kHz or 8 channels @ 24 bit/192 kHz record/playback via ADAT optical
DIGICheck® software for testing,
measuring and analyzing digital audio streams
TotalMix: 2592 channel mixer with 42- bit internal resolution
Extensive status windows showing mode and clock rates
Super low jitter design: < 1 ns in all clock modes
RayDAT is the multi-channel, multi-
format and multi-task tool that turns
every computer into a powerful
Digital Audio Workstation.
I/O Connectivity
36 Input / 36 Output channels
4 x ADAT I/O (optical)
1 x SPDIF I/O (coaxial)
1 x AES/EBU I/O (XLR)
2 x MIDI I/O
optional: HDSP TCO
Word Clock I/O, LTC I/O, Video In Sync In
optional: TEB - TDIF Module
optional: WCM - Word Clock Module
Specifications
1-Lane PCI Express Endpoint device (no PCI
Express to PCI Bridge), revision 1.1.
2.5 Gbps line speed - Packet-based full- duplex communication (up to 500 MB/s transfer rate)
Supported sample frequencies: Internally
32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz. Externally 28 kHz - 200 kHz
8 buffer sizes/latencies available: 0.7, 1.5,
3, 6, 12, 23, 46, 93 ms
ADAT inputs based on RME’s reliable Bitclock PLL
High-speed MIDI
Breakout cable for coaxial SPDIF operation
(included)
Digital formats: SPDIF, AES/EBU, ADAT
optical
Perfect Partners
Micstasy
8-Channel 192kHz
Full Range Preamp & AD converter
Analog . AES/EBU . ADAT . MADI
Worldwide Distribution
Am Pfanderling 60 . 85778 Haimhausen . Germany Tel.: +49-08133-918170 Fax: +49-08133-9166
OctaMic II
8-Channel 192 kHz
Mic Preamp & AD converter
Analog . AES/EBU . ADAT
ADI-8 QSM
8-Channel 192 kHz
High-End AD/DA converter
Analog . AES/EBU . ADAT . MADI
ADI-192 DD
8-Channel 192 kHz
digital format / samplerate converter
AES/EBU . ADAT . TDIF
www.rme-audio.com
Loading...