Page 1
DTOX-16
Universal XLR <> D-sub Analog Breakout Panels
The RME DTOX-16 breakout panels are the perfect rack solutions for interconnecting multichannel XLRs with the
common D-sub connector format. Three different versions are available: DTOX-16 I, DTOX-16 O and DTOX-16 I/O.
DTOX-16 connects up to 16 XLR inputs or outputs (XLR Neutrik connectors) with two D-sub 25-pin connectors.
DTOX-16 Versions
DTOX-16 I 16 x XLR Input 2 x D-sub
DTOX-16 I connects 16 XLR inputs to two D-sub 25-pin connectors (channels 1-8 and channels 9-16).
The breakout panel supports all interfaces using analog 25-pin D-sub inputs as well as the following RME interfaces:
M-32 AD, M-16 AD.
DTOX-16 O 16 x XLR Output 2 x D-sub
DTOX-16 O connects 16 XLR outputs to two D-sub 25-pin connectors (channels 1-8 and channels 9-16).
The breakout panel supports all interfaces using an analog 25-pin D-sub output as well as the following RME interfaces:
M-32 DA, M-16 DA.
DTOX-16 I/O 8 x XLR In > D-sub and 8 x XLR Out > D-sub
DTOX-16 I/O connects 8 XLR inputs to a D-sub 25-pin connector and 8 XLR outputs to another D-sub 25-pin connector.
The breakout panel supports all interfaces using an analog 25-pin D-sub I/O as well as the following RME interfaces:
ADI-8 QS, ADI-8 DS Mk III, M-32 AD, M-32 DA, M-16 AD, M-16 DA.
PIN-Out Information D-sub 25 Connectors (TASCAM format)
Signal 1+ 1- 2+ 2- 3+ 3- 4+ 4- 5+ 5- 6+ 6- 7+ 7- 8+ 8-
Pin 24 12 10 23 21 9 7 20 18 6 4 17 15 3 1 14
GND is connected to pins 2, 5, 8, 11, 16, 19, 22, 25. Pin 13 is not connected.
All trademarks are the property of their respective owners.
Loading...