Rival FRRVISCR-ABLU Owner's Manual

SERVICE INSTRUCTIONS

1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the Warranty.

2. If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed Warranty.

3. If you have any questions or comments regarding this unit’s operation or believe any repair is necessary, please write to our Consumer Service Department or visit our website at www.rivalproducts.com.

1-800-557-4825

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability? JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A. If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-557-4825 and a convenient service center address will be provided to you. In Canada If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-557-4825 and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department.

Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida

33431.

153342 Rev. 1 Rival Ice Shaver Cart_12ESM1 Printed in China GCDS-RIV27478-ZZ

1-YEAR LIMITED WARRANTY

Snow Cone Maker

Customer Assistance:

1-800-557-4825 www.rivalproducts.com

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.

2. To protect against risk of electrical shock, do not immerse cord,

plug or motor unit in water or other liquid.

3. Close supervision is necessary when any appliance is used near

children. This appliance should never be used by children.

4. To disconnect, unplug from outlet. Unplug when not in use,

before putting on or taking off parts and before cleaning.

5. Avoid contact with moving parts.

6. Do not operate any appliance with damaged cord or plug or

after the appliance malfunctions, or is dropped or damaged in any manner. Contact Customer Service (see warranty) to return for examination, repair or electrical or mechanical adjustment.

The use of appliances not recommended or sold by the manufacturer may cause fire, electric shock or injury.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or contact

hot surface, including the stove.

10. Never place fingers or other utensils into feed or discharge areas.

11. Check ice shaver for presence of foreign objects before using.

12. Blades are sharp. Handle carefully.

13. Be certain COVER is securely locked in place before operating

appliance. Do not attempt to defeat the COVER interlock mechanism.

14. Do not use extension cord.

SAVE THESE INSTRUCTIONS

This appliance is for HOUSEHOLD USE ONLY. No user-serviceable parts inside. Power unit never needs lubrication. Do not attempt to service this product. Do not immerse in water or other liquid. Any servicing should be performed by an authorized service representative.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully

into the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician. Do not attempt to modify the plug in any way. If the plug ﬁts loosely into the AC outlet or if the AC outlet feels warm, do not use that outlet.

KNOW YOUR SNOW CONE MAKER

COVER RELEASE BUTTON

UPPER HOUSING

BLADE

LID

COVER

DASHER

ICE CHUTE

-E2-

LOWER HOUSING

-E3-

HOW TO CLEAN & ASSEMBLE YOUR SNOW CONE MAKER

CAUTION: The stainless steel BLADE is very sharp. Never attempt to touch the tip of the BLADE when operating, assembling, disassembling, or cleaning.

1. Make sure the unit is unplugged.

2. Remove COVER by pressing the COVER RELEASE BUTTON located on the back side of the unit. Lift COVER to remove.

3. To remove DASHER, turn the DASHER counter-clockwise until it is completely unscrewed from the UPPER HOUSING. Lift DASHER to remove.

the LOWER HOUSING.) Do not attempt to remove the UPPER HOUSING until the DASHER has been removed ﬁrst.

5. Wipe down all parts and surfaces with a clean damp cloth, being careful to avoid direct contact with the BLADE. The COVER/LID, DASHER, and UPPER HOUSING may also be cleaned in the dishwasher. Do NOT place the LOWER HOUSING in the dishwasher.

CAUTION: Do not immerse assembled unit in water. TO REASSEMBLE: Reverse the above procedure, making sure that the

UPPER HOUSING is locked and aligned with the LOWER HOUSING before inserting the DASHER. Make sure to screw DASHER tightly back into place.

TO ATTACH COVER: Align the tab underneath the COVER with the tab slot on the front side of the UPPER HOUSING. Carefully lower the COVER onto the UPPER HOUSING, making sure that the tab is still aligned with the tab slot. (NOTE: you will not be able to see the tab inserted into the tab slot as you lower the COVER, but try to keep the COVER aligned in this same position as you lower it onto the UPPER HOUSING.)

4. Remove UPPER HOUSING by twisting the UPPER HOUSING in a counter-clockwise motion, until it unlocks from the LOWER HOUSING. (There are two sets of arrows on the backside of the unit that mark where to align the UPPER HOUSING with

TAB

TAB SLOT

-E5--E4-

+ 7 hidden pages