Rinnai RINV34RC, RIN51RC, RINV70RC Operation Manual

This appliance shall be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3000

• Local Regulations and Municipal Building Codes including local OH&S requirements This appliance must be installed, maintained and removed by an Authorised Person. For continued safety of this appliance it must be installed and maintained in

accordance with the manufacturers instructions.

ON/OFF

FAN

COOL

SWING

TURBO

LRSWING

COOL

SWING

SPEED

HEAT

RUN

Operation Manual

Split Type Wall Mounted Air Conditioner

Models: RINV25RC / RINV34RC / RIN51RC / RINV70RC

Rinnai 2 Split AC OM

TABLE OF CONTENTS

Warnings and Important Information 3

Air Conditioner Basics 5

Appliance Components �� 5

Remote Control Batteries �� 5

Remote Control Cradle �� 5

Controller Operating Basics �� 5

Remote Control Layout �� 6

Basic Operation 7

On �� 7

Off �� 7

Cooling �� 7

Heating �� 7

Fan Speed �� 7

Adjusting Vertical air ow ��8

Adjusting Horizontal air ow �� 8

Advanced Operation 9

Auto Mode �� 9

Dry (Dehumidifying) Mode �� 9

Fan Only Mode �� 9

Turbo �� 10

Quiet �� 10

Health (Wi-Fi) �� 10

Sleep Mode �� 10

Delay On Timer �� 11

Delay Off Timer �� 11

Cancelling ON/OFF timers �� 11

Room Temperature Display �� 11

Large Temperature Display �� 12

Auto Fresh �� 12

Spot Swing �� 12

Economy (cooling Only) �� 12

Cleaning Operation �� 13

Operating The Air Conditioner Without The Remote Control �� 13

Power Interruption Automatic Restart ��13

Care & Maintenance 14

General Maintenance �� 14

Cleaning the air lter �� 14

Save A Service Call �� 15

When to Call for Service �� 15

Warranty 16

Installation Record 19

Installer Details �� 19

System Details �� 19

Contacts 20

Rinnai 3 Split AC OM

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and to ensure optimum

performance�

Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

WARNINGS: WHEN IGNORED, CAN RESULT IN SERIOUS INJURY OR DEATH.

CAUTIONS: WHEN IGNORED, CAN RESULT IN MINOR INJURY OR PRODUCT DAMAGE.

WARNING

REGULATORY / INSTALLATION

This appliance shall be installed in accordance with:

Manufacturer’s Installation Instructions.

Current AS/NZS 3000�

Local Regulations and Municipal Building Codes including local OH&S requirements.

This appliance must be installed, maintained and removed by an Authorised Person.

For continued safety of this appliance it must be installed and maintained in accordance with the

manufacturers instructions�

This appliance uses R410A refrigerant�

This appliance is heavy, use 2 people or mechanical lifting device. Improper lifting may result in serious

injury�

Take care when opening or unpacking this appliance. Failure to do so may result in serious injury or

product failure�

DO NOT modify the electrical wiring of this appliance. If the control power wiring is damaged or

deteriorated then it must be replaced by an authorized person� Failure to do so may result in electric

shock, re, serious injury or product failure.

DO NOT install the air conditioner on an unstable or non level surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.

DO NOT install the outdoor unit where noise may cause nuisance.

DO NOT install the outdoor unit where it will be exposed to sea wind (salt spray) as this will reduce

durability�

OPERATION RANGE LIMITATIONS

The table below indicates the temperature ranges the air conditioner can be operated within.

MODE TEMPERATURE SOURCE

MINIMUM

OPERATION

TEMPERATURE

MAXIMUM

OPERATION

TEMPERATURE

Cooling / Heating

Adjustable inside temperature 16°C 32°C

Ambient outside temperature -12°C 47°C

IMPORTANT

WARNINGS AND IMPORTANT INFORMATION

Rinnai 4 Split AC OM

CAUTION

OPERATION

DO NOT let the air conditioner run for extended periods when the humidity is very high or when doors or

windows are left open. As this may result in an excessive operational loading and lead to product failure.

DO NOT cover or place articles on any part of this appliance�

DO NOT touch, operate or clean the air conditioner with wet hands. It may result in electric shock or

product failure�

DO NOT insert hands or other objects through the air inlet or outlet while the appliance. It may result in

electric shock or product failure�

DO NOT place a heater or other heating appliances near this appliance, always ensure sufcient ventilation when using this appliance and a heating appliance at the same time. Failure to do so may

result in product miss-operation�

Turn main power off before cleaning. Failure to do so may result in re, electric shock, or product failure.

DO NOT use solvents, abrasives or harsh detergent to clean any part or surface of this appliance or spray water or allow liquids to enter the indoor unit. The enclosure of the appliance and remote control can be cleaned using a soft, damp cloth and a mild detergent.

NEVER touch the metal parts of the air conditioner when you remove the air lter. It may result in electric

shock or product failure�

DO NOT leave ammable materials near the appliance. It may result in explosion or re.

If there is excessive noise, smell or smoke coming from the appliance, turn the appliance OFF, isolate the power supply and contact a service agent.

DO NOT operate the appliance if it has been submerged into water due to ooding, contact a service agent. Failure to do so may result in electric shock, re, serious injury, or product failure.

This appliance is NOT intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety�

Children should be supervised to ensure that they do not play with the appliance.

The air conditioning system is designed to achieve consumer comfort. It is not designed for commercial applications required a controlled atmosphere (i.e. computer rooms, food preservation, etc.)

DO NOT block the inlet or outlet of air ow. It may result product failure.

DO NOT drink the condensate water drained from the appliance. This condensate is not potable and may

present a health risk if consumed�

DO NOT expose people, animals or plants directly to the cold or hot discharge of the appliance. It may

result in serious injury�

DO NOT mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries� Failure to do so may result in product failure� STOP using the remote control if there is a

battery uid leak.

WARNING

WARNINGS AND IMPORTANT INFORMATION

Rinnai 5 Split AC OM

APPLIANCE COMPONENTS

1� Indoor unit air inlet

2� Filter (located behind front access panel)

3� Manual ON/OFF (Auto) override button

(located behind front access panel)

4� Indoor unit air outlet (with louvres and

vanes for setting air ow direction)

5� Remote control

6� Signal receiver window and set temperature

display (the display is built into the front access panel)

7� Refrigerant pipes, electrical cable(s)

(covered with binding tape)

8� Condensate drain hose (covered with

binding tape)

9� Refrigerant entry (for service and installer

use only)

10� Outdoor unit air inlet (on rear & left side of

unit)

11� Outdoor unit air discharge and protective

grille (on front of unit)

REMOTE CONTROL BATTERIES

Insert batteries before using the remote control. The battery type used is AAA (1.5 V).

1� Remove the battery cover at the rear of the remote control�

2� Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly.

3� Reattach the battery cover�

NOTE

If the LCD screen of the remote control starts to fade or fails to transmit, replace the batteries.

REMOTE CONTROL CRADLE

For convenience a slide-in cradle is provided for xing the remote control to a wall.

IMPORTANT

To Install:

Choose a safe and easily-accessible place. DO NOT mount the cradle in direct sunlight as this may damage the controller.

Fix the cradle to the wall using the holes provided using 2 screws.

CONTROLLER OPERATING BASICS

Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.

NOTE

The remote control may operate other electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.

For proper operation, use a soft cloth to clean the signal transmitter LED and the receiver window.

INDOOR UNIT

OUTDOOR UNIT

ON/OFF

FAN

COOL

SWING

TURBO

LRSWING

COOL

SWING

SPEED

HEAT

RUN

AIR CONDITIONER BASICS

Rinnai 6 Split AC OM

REMOTE CONTROL LAYOUT

The external buttons are for basic operations, the buttons located behind the door are for advanced operations.

1� ON / OFF button

Turns the power on/off.

2� FAN speed button

Adjusts the fan speed: AUTO / LOW /MEDIUM / HIGH.

3� Temperature adjustment buttons

Adjusts room temperature when cooling and heating.

4� COOL

One touch cooling operation�

5� HEAT

One touch heating operation�

6� SWING↕ button (vertical)

Adjusts the air ow direction vertically.

7� SWING↔ button (horizontal)

Adjusts the air ow direction horizontally.

8� Operation MODE selection button

Selects the operation mode: AUTO / COOLING / DRY

(dehumidifying) / HEATING / FAN (fan only)�

9� TURBO cooling / heating button

Warms or cools rooms at the fastest rate�

10� HEALTH button

Used to access Wi-Fi operation�

11� QUIET button

Sets appliance operation to lowest noise output level.

12� SLEEP button

Sets the sleep mode auto operation�

13� TIMER button

Sets the count down timer to turn the power ON / OFF.

14� ROOM°C Temperature display button

Displays the temperatures: ROOM / SET�

15� DISPLAY button

Turns indoor temperature display ON / OFF�

16� FRESH button

Keeps the head unit free of excess moisture by running

a 3 min cycle every time the unit is turned off�

17� CLEAN button

End of season cleaning process to dry the inside of the

indoor unit or when the appliance is not going to be used for an extended period of time.

18� SPOT SWING button

Sets a xed direction for air ow horizontally.

19� ECO button

Sets appliance to the most efcient operation.

20� Wireless Transmitter LED

21� LCD screen

Displays settings and operation modes�

22� Blank buttons

Not used�

ON/OFF

FAN

COOL

SWING

TURBO

LRSWING

SLEEP

HEALTH

ECO

DISPLAY

AUTO COOL

DRY

HEAT

FAN

PIR

AUTO

SILE

POWERCON

iFEEL

SWING

SPEED

OFF

Anti-F

iCLEAN LOCK

ELE.H

HEAT

RUN ROOM

DISPLAY

TIMER

ECO

TURBO

LRSWING

SLEEP

HEALTH

ECO

DISPLAY

AUTO COOL

DRY

HEAT

FAN

RUN ROOM

PIR

AUTO

SILE

POWERCON

iFEEL

SWING

SPEED

OFF

Anti-F

iCLEAN LOCK

ELE.H

SWING

SPOT

ROOM°C

CLEAN

FRESH

SLEEP

QUIET

TURBO

ON/OFF

HEALTH

FAN

MODE

14 16 18

109

13 15

22 22 22

Basic

Operation

Buttons

Advanced Operation

Buttons

AIR CONDITIONER BASICS

+ 14 hidden pages

Rinnai RINV34RC, RIN51RC, RINV70RC Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual