Rinnai RHFE-750ETRA User Manual

Page 1
RHFE-750ETRA
Type of Appliance
Rinnai Model Number AFUE (at minimum vent length) AFUE (extended vent of 33 ft [2.2 m] and
no elbows) Gas Rate Input (BTU/hour) Gas Rate Output (BTU/hour) Minimum Gas Supply Pressure Maximum Gas Supply Pressure Electrical Connection Gas Connection Burners Ignition System Exhaust System Temperature Settings
Temperature Control Warm Air Outlet Warranty
Vented gas fireplace heater; Inbuilt only; for residential installation, commercial setting, or manufactured home; not designed for installation in a solid-fuel burning fireplace
RHFE-750ETRA-N (Natural gas)
RHFE-750ETRA-P (Propane) 77% 84% 80% 85%
Low - 11,000 High - 29,000 Low - 11,000 High - 28,000 Low - 8,635 High - 21,900 Low - 8,855 High - 21,840
4.3 inch (109 mm) W.C. 9.8 inch (249 mm) W.C.
10.5 inch (267 mm) W.C. 13 inch (330 mm) W.C. AC 120V, 60 Hz Flex line: 3/8 inch flare nut; ball valve: 1/2 inch female x 3/8 inch flare Flame burners Electronic spark ignition Forced combustion, forced convection Low (L): minimum combustion; High (H): maximum combustion;
60° - 80° F in 2° increments (16° - 26° C in 1° increments) Electronic thermistor Bottom front louvers All parts: 2 years from date of purchase
DIMENSIONS - inches (mm)
33 3/16 (842)
FLUE CONNECTION
15 3/4 (400)
GAS CONNECT ION
2 1/4 (57)
14 7/8 (378)
4 15/16 (126)
21 5/16 - 23 5/16 (542 - 592)
2 15/16 (71)
33 3/16 (842)
35 7/16 (900)
B
23 5/8 (600)
10 13/16 (274)
B
27 9/16 (700)
WEIGHT: 154.3 lbs (70 kg)
14 1/2 (369)
26 3/4 (679)
3 5/16 (84)
17 13/16 (453)
25 13/16 (655)
Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to installation.
© 2009 Rinnai Corporation
750ETRA SP 7/2009
Page 2
RHFE-750ETRA
LOCATION
Minimum Enclosure Dimensions
Width (w) 33.8 in (860 mm)
Height (h) 26.0 - 26.2 in (660-665 mm)
Depth (d) 15.0 - 16.9 in (380-430 mm)
Minimum Enclosure Dimensions in
a Corner
x 63.8 in (1620 mm) y 45.1 in (1146 mm) z 31.9 in (810 mm)
w
h
d
Clearances for a mantle or decorative overhang
5”
4”
45
3” Minimum
3”
2”
Interior wall
1”
x
y
z
Side view
FASCIAS
Flat Metal - Black Front R2700
Flat Metal - Stainless Steel Front R2701
Radius Glass - Silver Front R2702 Radius Glass - Black Front R2703
VENTING WITH NO EXTENSIONS
Name Kit No. fits walls
Vent Kit A FOT-203
Vent Kit B FOT-204
Wall penetration hole: 3 1/2 in (90 mm) The FOT-203 Vent Kit is included with the appliance.
4 1/3 - 9 1/2 inch
(110 - 240 mm)
9 1/2 - 15 3/4 inch
(240 - 400 mm)
Available Fascias (Front Panels)
Description Part Number
FOT-203 / FOT-204
Flue extensions are not authorized to be used with the FOT-203 and FOT-204 manifolds.
Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-364-8643 • www.rinnai.us
Page 3
RHFE-750ETRA
VENTING WITH EXTENSIONS
Certified and Listed Vent Products
Manufacturer: Metal-Fab Product: Corr/Guard
Part Number
3CGRFA Adapter Kit (available from
3CGDS Condensate Collector 3CGRVT Vertical Termination 3CGRHT Horizontal Termination 3CG6 6” Vent Pipe Extension 3CG12 12” Vent Pipe Extension 3CG18 18” Vent Pipe Extension 3CG24 24” Vent Pipe Extension 3CG36 36” Vent Pipe Extension 3CGRHA 90 Degree Vent Pipe
Description
Rinnai
Elbow
Maximum Length = 33 feet (10 m) and 3 elbows
VERTICAL
TERMINATION,
3CGRVT
HORIZONTAL
TERMINATION,
VENT PIPE
EXTENSION
CONDENSATE
COLLECTOR,
3CGDS
Maximum Length draining back to appliance without a Condensate Collector =
8.2 feet (2.5 m)
3CGRHT
90 DEGREE VENT PIPE ELBOW, 3CGRHA
Sloped toward appliance to prevent condensate collecting
NOTICE
Installations depicted are examples of configurations only and exclude brackets, flashing, trim, and other accessories required for a complete installation.
Follow the guidelines in the Rinnai RHFE-750ETRA manual and follow the Metal-Fab installation instructions for installing the venting.
Refer to the Metal-Fab direct vent system components catalogue to determine the parts required for you particular vent application.
Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-364-8643 • www.rinnai.us
ADAPTER,3CGRFA (available from Rinnai)
in the elbow.
Loading...